YB15SKW01 NKK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 08-08 Short Body Pushbuttons Series YB Distinctive Characteristics Combination bezel-barrier is an integral part of the switch and prevents accidental actuation. Unique thermoplastic elastomer seal inside caps plus rolled sleeve of nitrile butadiene rubber at joining of housing and inner case, all for added protection to interior mechanism. Dust and oil tight as well as splashproof panel seal models qualify to IP65 of IEC60529 Standards (similar to NEMA 4 and 13). Panel seal models provided with exterior o-ring. Distinctive design of snap-action contacts for shock resistance, long life, and sensitive actuation. High density design to give behind panel depth of less than one inch. Terminals are epoxy sealed to lock out flux, dust, solvents, and other contaminants. Latchdown for indication of circuit status, plus audible, tactile feedback with smooth, responsive operation. Illuminated models available and shown in the Illuminated Pushbutton section. Matching indicators available and shown at the end of Section M. Actual Size
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 08-08 Short Body Pushbuttons Series YB General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V DC Logic Level (gold): 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 50 milliohms maximum for silver; 100 milliohms maximum for gold Insulation Resistance: 200 megohms minimum @ 500V DC Dielectric Strength: 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum Mechanical Life: 1,000,000 operations minimum for momentary circuit 200,000 operations minimum for maintained circuit Electrical Life: 100,000 operations minimum Nominal Operating Force: Single pole: 1.47N for nonsealed; 1.67N for sealed Double pole: 2.75N for nonsealed; 2.94N for sealed Contact Timing: Nonshorting (break-before-make) Materials & Finishes Housing/Bezel: Glass fiber reinforced polyamide (UL94V-0) Snap-in Frame: Stainless steel Base: Diallyl phthalate resin (UL94V-0) Movable Contactor: Phosphor bronze with silver or gold plating Movable Contacts: Silver alloy with silver plating or brass with gold plating Stationary Contacts: Silver alloy or copper with gold plating Terminals: Phosphor bronze with tin plating Environmental Data Operating Temp Range: –25°C through +70°C (–13°F through +158°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Sealing: IP65 of IEC60529 standard for panel seal models Installation Mounting Torque: 0.785Nm (6.95 lb•in) maximum Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Standards & Certifications Flammability Standards: UL94V-0 housing & base UL & C-UL Recognized: All solder lug models recognized at 3A @ 125/250V AC or 0.4VA @ 28V AC/DC maximum; UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch; C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch. CSA Certified: All solder lug models certified at 3A @ 125/250V AC or 0.4VA @ 28V AC/DC maximum; CSA File Nos. 023535-0-000; add “/C” to end of part number to order CSA mark on switch. R
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 08-08 Short Body Pushbuttons Series YB HOUSING K Black only SHAPES Bushing Mounting S Square C Round R Rectangular Snap-in Mounting K Square M Round N Rectangular POLES
1 SPDT
2 DPDT
1 C K 01YB
& White Insert Without Panel Seal Silver Contacts with 3 Amp Rating Solder Lug/.110” (2.8mm) Quick Connect Terminals Round with Bushing Mounting Black Housing SPDT ON-(ON) Circuit CIRCUITS
5 ON (ON)
( ) = Momentary
6 ON ON
& RATINGS W Silver Rated 3A @ 125V AC G Gold Rated 0.4V A max. @ 28V AC/DC max. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE YB15CKW01-FB FBW TERMINALS 01 Solder Lug/.110” (2.8mm) Quick Connect
03 Straight PC
(Bushing Mount only) TYPICAL SWITCH ORDERING EXAMPLE BB White/White CB Red/White EB Yellow/White FB Green/White GB Blue/White CAP COLORS Note: Cap with clear lens and colored insert available; see Illuminated Pushbuttons section IMPORTANT: Switches are supplied without UL, C-UL, & CSA markings unless specified. Specific models & rat- ings noted on General Specifica- tions page.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 08-08 Short Body Pushbuttons Series YB PANEL SEAL CONTACT MATERIALS & RATINGS Plunger Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Normal Down Normal Down Note: Switch is marked with NC, NO, COM, L+, L–. SP YB15 *YB16 ON ON (ON) ON 1-3 1-2 SPDT DP YB25 *YB26 ON ON (ON) ON 1-3 4-6 1-2 4-5 DPDT No Code Without Panel Seal W G W * When in latchdown position for the alternate circuit, cap position is .020” (0.5mm) above the built-in bezel. POLES & CIRCUITS HOUSING Silver Contacts Gold Contacts Power Level 3A @ 125/250V AC Logic Level 0.4VA max. @ 28V AC/DC max. K Black Housing available in black only. The 1-piece body and bezel-barrier have a matte finish. Complete explanation of operating range in Supplement section. With Panel Seal Bushing Mounting only Bushing Mounting Snap-in Mounting Supplied with mounting nut. S C RoundSquare R Rectangular M N RectangularRoundK Square Bezel-barrier is an integral part of the switch body. SHAPES & MOUNTING TYPES 32 5 (COM) (COM) Bushing Mounting Snap-in Mounting Supplied with mounting nut and o-ring AT089.
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 08-08 Short Body Pushbuttons Series YB (15.0) Sq .591 (12.2) .480 (4.0) .157 (21.0) .827 (12.2) .480 (4.0) .157 (15.0) .591 (15.0) Dia .591 (12.2) .480 (4.0) .157 Solder Lug/ .110” (2.8mm) Quick Connect01 TERMINALS CAPS & COLORS Colors Available: BB CB EB FB GB White/ White Blue/ White Green/ White Yellow/ White Red/ White Straight PC (7.3) .288 Epoxy Seal (2.0) .079 (1.2) .047 (2.8) .110 Thk = (0.5) .020 Epoxy Seal (0.6) R .024 (1.2) .047 (2.8) .110 (4.4) .173 Thk = (0.5) .020 Single Pole Double Pole 14 CL (3.7) Typ .146 (4.85) Typ .191 (1.6) Dia Typ .063 (5.55) Typ .219 (3.0) Typ .118 CL (3.7) Typ .146 (4.85) Typ .191 (1.6) Dia Typ .063 (5.55) .219 (3.0) .118 AT3001 Square AT3002 Round AT3003 Rectangular (15.0) Sq .591 (18.0) Sq .709 (10.9) .429 (7.3) .288 (24.3) .957 (9.4) .047 x .079 (0.5) Typ .020 (8.3) .327 (2.8) Typ .110 (9.7) .382 NC L - + NO NO COM (6.0) .236 (11.1) .437 (3.7) .146 TYPICAL SWITCH DIMENSIONS Square • Bushing Mounting Single & Double Pole YB15SKW01-CB Single pole models do not have terminals 4, 5, & 6. Materials: Lens & Insert: Polycarbonate Seal/Filter: Thermoplastic Elastomer
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 08-08 Short Body Pushbuttons Series YB (15.0) Dia .591 (18.0) Dia .709 (5.3) .209 (3.0) .118 (0.5) .020 (10.9) .429 (7.3) .288 (24.3) .957 (9.4) .047 x .079 (0.5) Typ .020 (2.8) Typ .110 Latchdown Position (0.5) .020 (9.7) .382 NC L - + NO NO COM (6.0) .236 (11.1) .437 (3.7) .146 Rectangular • Snap-in Mounting Single & Double Pole Round • Panel Seal Single & Double Pole YB25WCKW01-EB Single pole models do not have terminals 4, 5, & 6. YB15NKW01-CB Single pole models do not have terminals 4, 5, & 6. PANEL THICKNESS & CUTOUTS Bushing & Panel Seal Mount Snap-in Mount (21.0) .827 (24.0) .945 (15.0) .591 (18.0) .709 (0.5) Typ .020 (2.8) Typ .110 (1.2) x (2.0) Typ .047 x .079 (8.3) .327 (7.3) .288 (24.3) .957 (9.7) .382 NC L - + NO NO COM (6.0) .236 (11.1) .437 (3.7) .146 TYPICAL SWITCH DIMENSIONS Panel Thickness .020” ~ .197” (0.5mm ~ 5.0mm) Panel Thickness .039” ~ .138” (1.0mm ~ 3.5mm) AT106 Socket Wrench for Bushing Mounting Material: Aluminum with black alumite finish Note: Overtightening the mounting nut AT092 may damage the switch housing. (57.5) 2.264 (60.0) 2.362 (16.0) Dia .630 (18.0) Dia .709 (16.0) .630 + 0.2 – 0.0 Dia (16.0) .630 + 0.2 – 0.0 Dia (1.2) R .047
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 08-08 Short Body Pushbuttons Series YB (45.0) Min* 1.772 (16.0) Dia .630 (24.0) Min .945 * Minimum dimension allows opening of cover to 180ϒ AT4175 (23.4) .921 (23.9) .941 (12.5) .492 (29.2) 1.150 (5.2) .205 (23.2) .913 (5.9) .232 (16.2) .638 180ϒ OPTIONAL ACCESSORIES Dust/Splash Cover Protective Guard AT4072 Protective Guard Opens 90° Closes manually Materials: Lid: Polycarbonate Base: Glass Fiber Reinforced Polycarbonate Spring Loaded Protective Guard AT4175 Spring Loaded Protective Guard Opens 180° Closes automatically Materials: Lid: Polycarbonate Base: Glass Fiber Reinforced Polyamide Coil Spring: Stainless Steel Dust Covers and Protective Guards reduce depth of switch behind panel by .047” (1.2mm). Panel Thickness Range with Dust Cover or Protective Guards: Bushing Mounting Snap-in Mounting Panel Seal AT4115 Dust Cover for Snap-in or Bushing Mount AT4115 Splash Cover and AT541 O-ring for Bushing Mount Materials: Lid: Polyvinyl Chloride Base: Polyamide O-ring: Nitrile butadiene rubber (20.0) Dia .787 (16.0) Dia .630 (0.5) .020 (12.5) .492 (16.0) Dia .630 (1.2) .047 (11.4) .449 Assembled Bezel Height (23.9) .941 (23.4) .921 (12.0) .472 (16.0) Dia .630 (1.2) .047 (6.6) .260 (11.2) .441 (1.2) .047 Assembled Cap Height (23.9) .941 (22.9) .902 AT541 AT541 AT4115AT089 Note: AT089 o-ring supplied with panel seal model. Dust Cover Splash Cover AT4115 AT4115 Snap-in Mount Panel Seal
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 08-08 Short Body Pushbuttons Series YB LEGENDS (15.0) Sq .591 (13.48) Sq .531 (0.76) Typ .030 (13.48) Dia .531 (15.0) Dia .591 (0.76) Typ .030 (21.0) .827 (19.48) .767 (0.76) Typ .030 (13.48) .531 (15.0) .591 (0.76) Typ .030 ON Shaded Areas Are Printable Areas Additional Methods Additional methods for legends are engraving the lens and laser printing on film inserts. Maximum depth for engraving is .012” (0.3 mm) on the cap lens. Enamel paint is recommended to fill the engraved area. Easily create and submit your own legends using our new on-line Legend Maker. Visit www.nkkswitches.com For other legend support options, customers may either contact the factory and request the YB Legend Packet, or utilize the general information and basic specifications presented below. Suggested Printable Area for YB Lens Recommended Methods: Laser Etch on clear lens; Screen Print or Pad Print on lens. Epoxy based ink is recommended. LM