VHP202 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Document Number: 63006 For any ques tions, contact: foil@vishay.com www.vishay.com Revision: 14-Nov-07 1 H Series Vishay Foil Resistors Hermetically Sealed High Precision Bulk Metal® Foil Technology Resistors with TCR of ± 2 ppm/°C , Tolerance of ± 0.001 % and Load Life Stability of ± 0.005 % Any value at any tolerance available within resistance range INTRODUCTION The H series resistors are oil-filled, hermetically sealed ultra precision resistors. The hermetic sealing eliminates the ingress of moisture and oxygen, while the oil acts as a thermal conductor, thus eliminating long term degradat ion elements of unsealed resistors, while at the same time allowing the device to accept short periods of overload without degradation. Vishay’s Bulk Metal ® Foil outperforms all other resistor technologies available today for applications that require precision and stability. When combined with the hermetic sealing and oil filling, the H series resistors become one of the most precise and stable resistors available. With accuracies of 0.001 %, a resistance range from 5 Ω to 1.84 M Ω, and long term shelf life of less than 2 ppm, these devices are virtually secondary standards that can be carried in sets for daily or periodic calibration of factory measurement equipment.

FEATURES

  • Temperature coefficient of resistance (TCR): ± 2 ppm/°C typical
  • Power rating: 0.3 to 2.5 W at + 25 °C (depending on model - see table 2)
  • Tolerance: to ± 0.001 %
  • Load life stability: ± 0.005 % (70 °C for 2000 h at half rated power)
  • Shelf life stability: ± 2 ppm for at least 10 years
  • Resistance range: 5 Ω to 1.84 MΩ (higher or lower values of resistance available)
  • Electrostatic discharge (ESD) above 25 000 V
  • Rise time: 1.0 ns without ringing
  • Current noise: < - 40 dB
  • Thermal EMF: 0.05 µV/°C typical
  • Voltage coefficient: < 0.1 ppm/V
  • Non inductive: < 0.08 µH
  • Non inductive, non capacitive design
  • Non hot spot design
  • Terminal finishes available: lead (Pb)-free tin/lead alloy
  • Impervious to harmful environments - oil-filled
  • Any value available within resistance range (e.g. 1K234)
  • Prototype samples available from 48 h. For more information, please contact foil@vishay.com
  • For better performances, please see H series (Z) Note Load life stability can be cons iderably improved through in-house oriented tests * Pb containing terminations are not RoHS compliant, exemptions may apply Available Pb-free RoHS* COMPLIANT TABLE 1 - TOLERANCE AND TCR VERSUS RESISTANCE VALUE RESISTANCE VALUE (Ω) TYPICAL TCR AND MAX. SPREAD (ppm/°C) 80 to < 1M84 ± 2 ± 2.5 50 to < 80 ± 2 ± 3.5 5 to < 50 ± 2 ± 4.5 FIGURE 1 - POWER DERATING CURVE + 100 + 75 + 50 + 25 - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 + 150 + 175 Percent of Rated Power - 55 °C Ambient Temperature (°C)

Vishay Foil Resistors Hermetically Sealed High Precision Bulk Metal® Foil Technology Resistors with TCR of ± 2 ppm/°C , Tolerance of ± 0.001 % and Load Life Stability of ± 0.005 % www.vishay.com For any questions, contact: foil@vishay.com Document Number: 63006

2 Revision: 14-Nov-07

  • Available in a 4-lead terminal 0.375 H available See next page for numbered footnotes FIGURE 2 - TRIMMING TO VALUES (Conceptual Illustration) Mutual Inductance Reduction due to Change in Current Direction Current Path Before Trimming Trimming Process Removes this Material from Shorting Strip Area Changing Current Path and Increasing Resistance Note: Foil shown in black, etched spaces in white Current Path After Trimming Interloop Capacitance Reduction in Series FIGURE 3 - FOIL RESISTOR TYPICAL TCR CURVE - 50 - 25 0 + 25 + 50 + 75 + 100 + 125 - 55 2 ppm/°C + 150 + 100 + 50 - 50 - 100 - 150 - 200 (ppm) ΔR R Temperature (°C) C Alloy 2 ppm/°C TABLE 2 - MODEL SELECTION MODEL NUMBER RESISTANCE RANGE (Ω) STANDARD RESISTANCE TOLERANCE MAXIMUM WORKING VOLTAGE2) POWER RATING at + 25 °C AVERAGE WEIGHT (g) CONSTRUCTION BRIEF DIMENSIONS3) TIGHTEST (Ω) LOOSEST (%) INCHES mm VHP202 5 to 100K > 100K to 150K 1K to †1) 500 to < 1K 50 to < 500 30 to < 50 20 to < 30 10 to < 20 5 to < 10 ± 0.001 ± 0.1 ± 0.0025 ± 0.1 ± 0.005 ± 0.1 ± 0.01 ± 0.1 ± 0.02 ± 0.1 ± 0.05 ± 0.1 ± 0.1 ± 0.1 300 0.3 W 0.2 W 1.4 Oil-filled, tinned copper leads, nickel shell, kovar and glass header W: 0.185 ± 0.020 L: 0.435 ± 0.020 H: 0.430 ± 0.020 LL: 1.000 ± 0.125 LS: 0.150 ± 0.010 ST: 0.095 max. 4.70 ± 0.51 11.05 ± 0.51 10.92 ± 0.51 25.4 ± 3.18 3.81 ± 0.25 2.41 max. VHA412 5 to 100K > 100K to 150K 250 0.3 W 0.2 W 4.6 Oil-filled, tinned copper leads, tinned brass shell, kovar and glass end bells L: 0.625 ± 0.031 D: 0.375 ± 0.031 LL: 1.000 min. 15.88 ± 0.79 9.53 ± 0.79 25.4 min. VHA414 5 to 200K > 200K to 335K 350 0.5 W 0.3 W 7.3 L: 1.000 ± 0.031 D: 0.375 ± 0.031 LL: 1.000 min. 25.4 ± 0.79 9.53 ± 0.79 25.4 min. VHA512* 5 to 300K > 300K to 500K 350 0.75 W 0.4 W 6.3 L: 0.625 ± 0.031 D: 0.500 ± 0.031 LL: 1.000 min. 15.88 ± 0.79 12.7 ± 0.79 25.4 min. VHA516-4* VHA516-5* VHA516-6* 5 to 400K > 400K to 668K 5 to 500K > 500K to 835K 5 to 600K > 600K to 1M 500 1.0 W 0.5 W 1.25 W 0.6 W 1.5 W 0.7 W 9.2 L: 1.000 ± 0.031 D: 0.500 ± 0.031 LL: 1.000 min. 25.4 ± 0.79 12.7 ± 0.79 25.4 min. VHA518-7* VHA518-8* VHA518-9* VHA518-10* VHA518-11* 5 to 700K > 700K to 1M17 5 to 800K > 800K to 1M34 5 to 900K > 900K to 1M5 5 to 1.0M > 1.0M to 1M67 5 to 1.0M > 1.0M to 1M84 600 1.75 W 0.8 W 2.0 W 0.9 W 2.25 W 1.0 W 2.5 W 1.1 W 2.5 W 1.2 W 13.5 L: 1.500 ± 0.031 D: 0.500 ± 0.031 LL: 1.000 min. 38.1 ± 0.79 12.7 ± 0.79 25.4 min.

Document Number: 63006 For any ques tions, contact: foil@vishay.com www.vishay.com Revision: 14-Nov-07 3 H Series Hermetically Sealed High Precision Bulk Metal® Foil Technology Resistors with TCR of ± 2 ppm/°C , Tolerance of ± 0.001 % and Load Life Stability of ± 0.005 % Vishay Foil Resistors Notes 1. Upper end of resistance range varies with model selected (i.e. VHP202; the range is to 150 kΩ; VHA518-10, the range is to 1M67 Ω) per table 2 2. Not to exceed power rating of resistor 3. Insulating sleeve - a special case insulating plastic sleeve is available on VHA models. See table 4 for instructions on how to specify 4. 0.200 " (5.08 mm) lead spacing available - specify VH202J 5. Inductance (L) due mainly to the leads 6. The resolution limit of existing test equipment (within measurement capability of the equipment, or “essentially zero”) 7. µV/°C relates to EMF due to lead temperature difference and µV/W due to power applied to the resistor 8. Load life ΔR maximum. Can be reduced through in-house oriented processes FIGURE 4 - STANDARD IMPRINTING AND DIMENSIONS LS Model Number VISHA Y XXXX VHP202 ST H L Date Code W Front View Rear View Lead Material #22 AWG Round Solder Coated Copper Resistance Value Code Tolerance Serial No. 100R01 0.01% XXXX Week Year LL Lead Material #22 AWG Round Solder Coated Copper Tolerance Model No. Resistance Value Code Date Code Week Year VISHA Y XXXX VHA412 100R01 0.005% D LL L TABLE 3 - “H” SERIES SPECIFICATIONS Stability8) Load life at 2000 h ± 0.002 % maximum ΔR at 0.1 W per chip and at + 60 °C Shelf life ± 2 ppm (0.0002 %) for at least 10 years Current Noise < - 40 dB High Frequency Operation Rise time 1.0 ns without ringing Inductance (L) 5) 0.1 µH maximum; 0.08 µH typical Capacitance (C) 1.0 pF maximum; 0.5 pF typical Voltage Coefficient < 0.1 ppm/V Thermal EMF7) 0.1 µV/°C maximum; 0.05 µV/°C typical; 1 µV/W maximum Hermeticity 10-7 atmospheric cc/s maximum

Vishay Foil Resistors Hermetically Sealed High Precision Bulk Metal® Foil Technology Resistors with TCR of ± 2 ppm/°C , Tolerance of ± 0.001 % and Load Life Stability of ± 0.005 % www.vishay.com For any questions, contact: foil@vishay.com Document Number: 63006

4 Revision: 14-Nov-07

  • For non-standard requests, please contact application engineering. TABLE 4 - GLOBAL PART NUMBER INFORMATION NEW GLOBAL PART NUMBER: Y0019120K500V9L (preferred part number format) DENOTES PRECISION VALUE AER* YR = Ω K = kΩ M = MΩ 0 = standard 1 = tin/lead with plastic sleeve 9 = lead (Pb)-free 19 = lead (Pb)-free with plastic sleeves 2 - 999 = custom PRODUCT CODE RESISTANCE TOLERANCE PACKAGING 0024 = VHP202 and VH202C 0019 = VHA412 0025 = VHA414 0023 = VHA512 0104 = VHA516-4 0105 = VHA516-5 0106 = VHA516-6 0107 = VHA518-7 0108 = VHA518-8 0109 = VHA518-9 0110 = VHA518-10 0111 = VHA518-11 S = ± 0.001 % U = ± 0.002 % X = ± 0.0025 % V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % L = bulk pack FOR EXAMPLE: ABOVE GLOBAL ORDER Y0019 120K500 V 9 L: TYPE: VHA412 VALUE: 120.5 kΩ ABSOLUTE TOLERANCE: ± 0.005 % TERMINATION: lead (Pb)-free PACKAGING: bulk pack HISTORICAL PART NUMBER: VHA412T 120K50 V B (will continue to be used) VHA412 T 120K50 V B MODEL TERMINATION PLASTIC SLEEVE OHMIC VALUE TOLERANCE PACKAGING VHP202 and VH202C VHA412 VHA414 VHA512 VHA516-4 VHA516-5 VHA516-6 VHA518-7 VHA518-8 VHA518-9 VHA518-10 VHA518-11 T = lead (Pb)-free None = tin/lead P = plastic sleeve None = standard 120K50 = 120.5 kΩ S = ± 0.001 % U = ± 0.002 % X = ± 0.0025 % V = ± 0.005 % T = ± 0.01 % Q = ± 0.02 % A = ± 0.05 % B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % B = bulk pack 0191 0K5 2 V90 L

Document Number: 91000 www.vishay.com Revision: 18-Jul-08 1 Disclaimer Legal Disclaimer Notice Vishay All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all li ability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permit ted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.