XPT8P003A ETC2 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
16 MHz advanced XPT8 core with Harvard architecture and 3-stage pipeline Extended instruction set Memories Program memory: 8 Kbyte Flash memory; data retention 20 years at 55°C after 100 cycles RAM: 1 Kbyte Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles Clock, reset and supply management 2.95 V to 5.5 V operating voltage Flexible clock control, 4 master clock sources - Low-power crystal resonator oscillator - External clock input - Internal, user-trimmable 16 MHz RC - Internal low-power 128 kHz RC Clock security system with clock monitor Power management - Low-power modes (wait, active-halt, halt) - Switch-off peripheral clocks individually - Permanently active, low-consumption power-on and power-down reset Interrupt management Nested interrupt controller with 32 interrupts Up to 27 external interrupts on 6 vectors Timers Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization 16-bit general purpose timers, with 3 CAPCOM channels (IC, OC or PWM) 8-bit basic timer with 8-bit prescaler Auto wakeup timer Window and independent watchdog timers Communications interfaces UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode SPI interface up to 8 Mbit/s I2C interface up to 400 Kbit/s Analog to digital converter (ADC) 10-bit ADC, ± 1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog I/Os Up to 28 I/Os on a 32-pin package including 21 high-sink outputs Highly robust I/O design, immune against current injection Development support Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging TSSOP20