XPL7030-131ML COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Shielded Power Inductors – XPL7030 Document 568-1 Document 568-1 Revised 10/15/09
- Large terminations for excellent thermal management Soft saturation makes them ideal for VRM/VRD applications. XPL7030-102 specified by NSC in AN-1900 as L1 XPL7030-682 specified by STMicro for the LED7707 Inductance2 DCR (mOhms)3 SRF typ4 Isat (A)5 Irms (A)6 Part number1 ±20%(µH) typ max (MHz) 10% drop 20% drop 20°C rise 40°C rise 1. When ordering, please specify packaging code: XPL7030-103MLC Packaging: C =7 ″ machine-ready reel. EIA-481 embossed plastic tape (400 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =1 3″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (1500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Irms Testing Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. Designer’s Kit C430 contains 3 each of all values Terminations RoHS compliant matte tin over nickel over copper. Other terminations available at additional cost. Weight 0.74 g Core and winding loss See www.coilcraft.com/coreloss Ambient temperature –40°C to +125°C. The part can be operated without damage as long as the part (ambient temperature plus temperature rise due to self heating) does not exceed +165°C Storage temperature Component: –40°C to +165°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 400/7″ reel; 1500/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 3.3 mm pocket depth PCB washing Only pure water or alcohol recommended
Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 SMT Power Inductors – XPL7030 Series Document 568-2 Document 568-2 Revised 09/22/09 0.1 0.01 100 0.01 0.1 100101 Inductance (µH) Frequency (MHz) 3.3 µH 10 µH 22 µH 1.0 µH 0.13 µH Typical ESR vs Frequency 0.1 101 Equivalent Series Resistance (Ohms) Frequency (MHz) 10 µH 22 µH 3.3 µH 0.13 µH 1.0 µH Typical L vs Current Typical L vs Frequency 0.1 0.01 100 0.01 0.1 100101 Inductance (µH) Current (A) 3.3 µH 10 µH 22 µH 1.0 µH 0.13 µH 0.276 ±0.020 7,00 ±0,50 0.276 ±0.008 7,00 ±0,20 0.078 2,00 XXX 0.118 3,00 max 0.079 2,00 0.094 2,40 0.236 6,00 Recommended Land Pattern 0.118 3,00 0.182 4,62 0.260 6,60 Dash number Dimensions are in inches mm