XP1044-QL MA-COM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Features

 34 dBm P1dB  Pout 26 dBm @ EVM = 2.5% (PAR=9.17 dB)  46 dBm OIP3  18.5 dB Gain  8V Voltage Supply  Input Internally Matched  7x7mm Surface Mount Package  Ideal for WiMAX Applications @ 5.8 GHz and  Applications between 4 GHz and 5 GHz  RoHS* Compliant and 260°C Reflow Compatible

Description

The XP1044 is a highly linear 2 -stage power amplifier capable of 18.5 dB of gain, 34 dBm of power at 1 dB compression and is housed in an RoHS compliant 7x7mm package. The XP1044 provides less than 2.5% EVM at 26 dBm output power with 802.16 OFDM signal and peak to average ratio 9.17 dB. The input and output of the device are internally pre -matched facilitating a simplified input and output match. This product operates off an 8V voltage supply and requires negative voltage which is used for current control. The XP1044-QL is specifically designed for WiMAX applications between 4.9 GHz and 5.9 GHz, and the performance can be shifted by adding external matching components to cover applications between 4.0 GHz and 5.0 GHz.

Ordering Information

XP1044-QL-0N00 bulk quantity XP1044-QL-EV1 evaluation module for 4.9 GHz ~ 5.9 GHz XP1044-QL-EV2 evaluation module for 4.0 GHz ~ 5.0 GHz Pin Configuration Pin No. Function Pin No. Function 3,4,5 RF IN 23 VD1 8 VG! 22 VD2

9 VG2

1,2,6,7,10, 11,12,13, 14,15,16, 20,21,24, 25,26,27, GND 17,18,19 RF OUT Absolute Maximum Ratings Parameter Absolute Max. Drain Supply Voltage (Vd) +9.0 V Gate Supply Voltage (Vg) 0 V ~ -5 V RF Input Power (RFin) +23 dBm Stage 1 Current (Idd1) 375 mA Stage 2 Current (Idd2) 750 mA Power Dissipation (PDC) 9,0 W Storage Temperature -55 °C to +150 °C Junctions Temperature 175 °C Operating Temperature (Ta) -40 °C to See Note 2 ESD (HBM) Class 1A Moisture Sensitivity level MSL3 Thermal Resistance (Rth)1 15.6 °C (1) *Thermal resistance of stage 2 only (2) Calculate maximum operating backside temperature using: Tmax = 167 °C – [Vd*Idd2*Rth]. Thermal resistance of the 1st stage is 2x Rth of the output stage, and therefore Idd1 must not exceed ½ Idd2 for a specific maximum temperature Functional Block Diagram Pin-out Details: Pin 1 Indicator

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Electrical Specifications: 4.9-5.9 GHz (5.8 GHz Typ.) (Ambient Temperature T = 25°C)1 Parameter Units Min. Typ. Max. Power Gain dB 16.5 18.5 Linear Power (@ EVM=2.5%, OFDM, 802.16 PAR=9.17 dB) dBm 26.0 Input Return Loss (S11) dB -10.0 Output IP3 @ 22 dBm/Tone dBm 44 46.0 Noise Figure dB 5 Output P1dB dBm 32.5 34.0 Stage 1 Supply Current (Idd1) mA 300 Stage 2 Supply Current (Idd2) mA 600 Stage 1 Gate Voltage (Vg1) V -1.2 -0.85 -0.5 Stage 2 Gate Voltage (Vg2) V -1.2 -0.85 -0.5 Supply Voltage (Vd1 & Vd2) V 8.0 (1) Unless otherwise specified, the following specifications are guaranteed at room temperature in a M/A -COM Tech test fixture.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Evaluation Board Layout (4.9 GHz ~ 5.9 GHz Ref Designator Description QTY C1 , C2 10.0 pF 0402 Capacitor 1 C3, C4, C5, C6 1000 pF 0402 Capacitor 4 2C1C C3 C4 C5 C6 C10 C7, C8, C9, C10 1 uF A-Case Capacitor 4 01C9C C5 C6 2dV1dV tuOFRniFR 2C1C Material: Rogers4003 Thickness: 8mil 8C7C C3 C4 2gV1gV Dimensionsare in inches. Input Match Details Output Match Details For improved performance at 6 GHz the thick transmission line (W=0.069”) on the output can be extended to touch the two open stubs.

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Typical Performance Curves (EV1, Idq1 = 300 mA, Idq2 = 600 mA) -16 -14 -12 -10 -10 -44 -40 -36 -32 4.9GHz 5.0GHz 5.1GHz 5.2GHz 5.3GHz 5 4GH -60 -56 -52 -48 23 23 24 24 25 25 26 26 27 27 28 28 5.4GHz 5.5GHz 5.6GHz 5.7GHz 5.8GHz 5.9GHz 6.0GHz 4.9GHz 5.0GHz 5.1GHz 18 19 20 21 22 23 24 25 26 27 28 5.2GHz 5.3GHz 5.4GHz 5.5GHz 5.6GHz 5.7GHz 5.8GHz 5.9GHz 6.0GHz 33.5 34.5 30.5 31.5 32.5 4 9 5 0 5 1 5 2 5 3 5 4 5 5 5 6 5 7 5 8 5 9 6 0 P1dB Psat

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Typical Performance Curves (EV1, Idq1 = 300 mA, Idq2 = 600 mA, Over Temp) +25ºC -40ºC +85ºC +25ºC -40ºC +85ºC +25ºC -40ºC +85ºC -20 -10 +25ºC -40ºC -60 -50 -40 -30 40 C +85ºC

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Typical Performance Curves (EV1, Idq1 = 330 mA, Idq2 = 660 mA) 33.5 34.5 30.5 31.5 32.5 P1dB Psat -40 -36 -32 4.9GHz 5.0GHz 5.1GHz -60 -56 -52 -48 -44 23 23 24 24 25 25 26 26 27 27 28 28 5.2GHz 5.3GHz 5.4GHz 5.5GHz 5.6GHz 5.7GHz 5.8GHz 5.9GHz 6.0GHz 4.9GHz 5.0GHz 5.1GHz 18 19 20 21 22 23 24 25 26 27 28 5.2GHz 5.3GHz 5.4GHz 5.5GHz 5.6GHz 5.7GHz 5.8GHz 5.9GHz 6.0GHz18 19 20 21 22 23 24 25 26 27 28 6.0GHz

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Evaluation Board Layout: EV2 (4.0 GHz ~ 5.0 GHz) 2C1C C5 C6 C10 C12C11 C3 C4C7 Ref Designator Description QTY C1 , C2 10.0 pF 0402 Capacitor 1 C3, C4, C5, C6 1000 pF 0402 Capacitor 4 C7, C8, C9, C10 1 uF A-Case Capacitor 4 C11, C12 0.5 pF 0402 Capacitor 2 01C9C C5 C6 Material: Rogers4003 Thickness: 8mil 2dV1dV tuOFRniFR 2C1C 8C7C C3 C4 21C11C 2gV1gV

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Typical Performance Curves (EV2, Idq1 = 300 mA, Idq2 = 600 mA) S21 -16 -14 -12 -10 S11 S22 +25ºC +25ºC -20 -10 -60 -50 -40 -30 +25ºC

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 App Note [1] Biasing - The XP1044-QL requires power supply sequencing. Negative voltage supply (VG) needs to be turned on first and then positive voltage can be applied to the drain (VD). When turning off the de- vice, the positive supply (VD) should be turned off first and then negative voltage (VG) can be removed. The gate voltage is adjusted in order to set the drain current to the desired level. The gate voltage required to achieve a certain current can vary over temperature and from one device to another due to pinch -off voltage variation. Constant drain current can be achieved by implementing an active bias circuit which allows for tem- perature compensation and eliminates the effect of pinch off voltage variation. The input stage transistor periphery is half of the output stage transistor periphery and therefore the gate volt- ages needed to set the first stage current to 300mA and the second stage current to 600mA are the same. The gate voltages can be connected together and a single active bias circuit can be implemented adding a total of 6 components at a cost of approximately $0.15. Typical Application XB1014-QT XP1080-QU TX Filter (if required) DET TX XU1019-QH DRIVER PA + DET DIPLEXER IF IN LO

Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3W Power Amplifier Module 4.0-5.9 GHz XP1044-QL ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Rev. V2 Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these class 2 devices. Lead-Free Package Dimensions/Layout