XFL6012 COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Shielded Power Inductors – XFL6012 Document 980-1 Document 980-1 Revised 07/08/15 Inductance2 DCR (mOhms)3 SRF typ4 Isat (A)5 Irms (A)6 Part number1 ±20% (µH) typ max (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise 1. When ordering, please specify termination and packaging codes: XFL6012-801MEC Termination: E = RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3000 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Composite Core and winding loss See www.coilcraft.com/coreloss Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight 0.20 – 0.22 g Ambient temperature –40°C to +125°C with (40°C rise) Irms current. Maximum part temperature +165°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 750/7″ reel; 3000/13″ reel Plastic tape: 16 mm wide, 0.3 mm thick, 12 mm pocket spacing, 1.4 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.
- High current, very low DCR, soft saturation
- Very low profile – 1.2 mm maximum Irms Testing Irms testing was performed on 0.75 inch wide × 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other com- ponents. Therefore temperature rise should be verified in appli- cation conditions.
+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2016 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Shielded Power Inductors – XFL6012 Document 980-2 Document 980-2 Revised 07/08/15 L vs Current L vs Frequency 0.18 µH 0.39 µH 0.60 µH 0.80 µH 1.0 µH 0.1 0.1 1 10010 Frequency (MHz) Inductance (µH) 02 314 5678 91 01 11 2 13 14 0.10 0.05 0.20 0.15 0.25 0.30 Current (A) Inductance (µH) 0.18 µH 02 314 5678 91 01 11 21 3 0.2 0.1 0.4 0.3 0.5 0.6 Current (A) Inductance (µH) 0.39 µH 0 2 31 4 5 6 7 8 9 10 11 0.2 0.6 0.4 0.8 1.0 Current (A) Inductance (µH) 0.60 µH 02 314 5678 91 0 0.4 0.2 0.8 0.6 1.0 1.2 Current (A) Inductance (µH) 0.80 µH 0.4 0.8 1.2 1.6 Current (A) Inductance (µH) 02 314 5678 91 0 1.0 µH 0.258 ±0.008 6,56 ±0,2 0.250 ±0.008 6,36 ±0,2 0.051 ±0.002 1,30 ±0,05 0.110 ±0.01 2,79 ±0,25 XXX Dash number 0.159 4,04 Recommended Land Pattern 0.197 5,0 typ 0.056 1,43 0.216 5,50 inches mmDimensionsare in Indicatesorientation of terminations 0.047 1,2 max 0.0024 0,060