DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Shielded Power Inductors – XFL3010 Document 727-1 Inductance2 DCR (Ohms)3 SRF typ4 Isat (A)5 Irms (A)5 Part number1 ±20% (µH) nom max (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise Designer’s Kit C440 contains 5 of each XFL3010 and XFL3012 value Core material Composite Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Other terminations available at additional cost. Weight 44 mg Ambient temperature –40°C to +125°C with (40°C rise) Irms current. Maximum part temperature +165°C (ambient + temp rise). Derating. Storage temperature Component: –40°C to +165°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.14 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.

  • AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient)
  • High current, magnetically shielded power inductors
  • Only 1 mm high with a 3 mm × 3 mm footprint 1. When ordering, please specify termination and packaging codes: XFL3010-222MEC Termination: E = RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Special order: S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). Document 727-1 Revised 04/11/18 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Shielded Power Inductors – XFL3010 Document 727-2 Revised 04/11/18 Document 727-2 Shielded Power Inductors – XFL3010 Typical L vs Frequency 0.1 1000 100 0.1 1 10010 Frequency (MHz) Inductance (µH) 3.3 µH 33 µH 1.0 µH 10 µH 100 µH 220 µH 0.080 2,03 0.114 2,90 0.039 1,0 Recommended Land Pattern 0.118 ±0.008 3,0 ±0,2 0.118 ±0.008 3,0 ±0,2 0.043 1,1 max Dash number Dot indicates start lead XXX 0.106 ±0.008 2,69 ±0,20 0.030 0,77 ±0.008 ±0,20 typ0.050 1,26 inches mmDimensionsare in For optional tin-lead and tin-silver- copper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0.13 mm. Parts manufacturedprior to June 2018 mayb e marked differently.

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Shielded Power Inductors – XFL3010 Document 727-3 Revised 04/11/18 Document 727-3 Typical L vs Current 0.2 0.4 0.6 0.8 1.0 Current (A) Inductance (µH) 0.60 µH Current (A) Inductance (µH) 22 µH 0.5 1.0 1.5 Current (A) Inductance (µH) 1.0 µH 0.5 1.0 2.0 1.5 Current (A) Inductance (µH) 1.5 µH Current (A) Inductance (µH) 2.2 µH Current (A) Inductance (µH) 3.3 µH Current (A) Inductance (µH) 4.7 µH Current (A) Inductance (µH) 6.8 µH Current (A) Inductance (µH) 10 µH Current (A) Inductance (µH) 15 µH

+1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.com +886-2-2264 3646 sales@coilcraft.com.tw +86-21-6218 8074 sales@coilcraft.com.cn + 65-6484 8412 sales@coilcraft.com.sg © Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Shielded Power Inductors – XFL3010 Document 727-4 Revised 04/11/18 Document 727-4 Current (A) Inductance (µH) 33 µH Current (A) Inductance (µH) 39 µH Current (A) Inductance (µH) 47 µH Current (A) Inductance (µH) 56 µH 100 Current (A) Inductance (µH) 68 µH 120 Current (A) Inductance (µH) 82 µH 100 150 Current (A) Inductance (µH) 100 µH Typical L vs Current 100 200 300 Current (A) Inductance (µH) 220 µH