XFL2010 COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
US +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.comUK +886-2-2264 3646 sales@coilcraft.com.twTaiwan +86-21-6218 8074 sales@coilcraft.com.cnChina + 65-6484 8412 sales@coilcraft.com.sgSingapore © Coilcraft Inc. 2022 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. AEC Q200 125°C+ Halogen Free Shielded Power Inductors XFL2010 Document 1690-1 Document 1690-1 Revised 03/15/22 Inductance2 DCR (Ohms)3 SRF typ4 Isat (A)5 Irms (A)6 Part number1 ±20% (µH) typ max (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise
- Ultra-miniature, magnetically shielded power inductors
- Very low DCR, excellent current handling, soft saturation
- AEC-Q200 Grade 1 (–40°C to +125°C)8 1. When ordering, please specify termination and packaging codes: XFL2010-224MEC Termination: E = RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Special order: S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel).Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 4395A or equivalent. 5. DC current at 25°C that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 7. Electrical specifications at 25°C. 8. -224 rated AEC-Q200 Grade 3. Maximum part temperature 125°C for this part number only. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Composite Weight 19 – 21 mg Operating voltage 40 V (higher ratings on request) Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver-copper (96.5/3/0.5) over tin over nickel over silver-platinum. Other terminations available at additional cost. Ambient temperature –40°C to +125°C8 with (40°C rise) Irms current Maximum part temperature +165°C8 (ambient + temp rise). Storage temperature Component: –55°C to +165°C8 Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Packaging 2000/7″ reel; 7500/13″ reel Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Sample & buy Support & FAQ Web page Tools & software
US +1-847-639-6400 sales@coilcraft.com +44-1236-730595 sales@coilcraft-europe.comUK +886-2-2264 3646 sales@coilcraft.com.twTaiwan +86-21-6218 8074 sales@coilcraft.com.cnChina + 65-6484 8412 sales@coilcraft.com.sgSingapore © Coilcraft Inc. 2022 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. AEC Q200 125°C+ Halogen Free Document 1690-2 Document 1690-2 Revised 03/15/22 Shielded Power Inductors – XFL2010 Series Typical L vs Current Typical L vs Frequency 0.01 100 1000 Inductance (µH) 0.01 0.1 1001 10 Current A() 0.1 0.04 µH 1.0 µH 10 µH 100 µH 220 µH 0.12 µH 4.7 µH 47 µH 0.38 µH Dimensions are in inches mm