XFDM-100KPDWSR

XFDM-025KPDSR FUJIKURA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Pre-amplified／5V Excitation／Differential XFDM Data sheet ■Features Differential pressure On-chip amplification and temperature compensations Pre-calibration of offset voltage and span Surface mount package ■Ordering Information Weight (grams) 1.3 Measurable pressure range(kPa) Part number -100 to 100 XFDM-100KPDWSR 0 to 25 XFDM-025KPDSR 0 to 50 XFDM-050KPDSR 0 to 100 XFDM-100KPDSR 0 to 200 XFDM-200KPDSR 0 to 1000 XFDM-001MPDSR ■Specifications Model 100KPDW 025KPD 050KPD 100KPD 200KPD 001MPD Unit Recommended operating conditions Pressure type Differential pressure - Rated pressure +/-100 25 50 100 200 1000 kPa Measurable pressure range -100 to 100 0 to 25 0 to 50 0 to 100 0 to 200 0 to 1000 kPa Temperature range 0 to 85 deg.C Pressure media Non-corrosive gases only (No liquid) - Supply voltage(constant) 5+/-0.25 VDC Absolute maximum rating Maximum differential pressure *1 Port1 Maximum load pressure Port2 Maximum load pressure Twice of rated pressure 1.5 times of rating pressure Maximum excitation voltage 8 VDC Operating temperature -40 to 125 deg.C Storage temperature -40 to 125 deg.C Operating humidity 30 to 80 (Non dew condition) %RH Electrical characteristics (Excitation voltage Vcc=5.0V constant ,ambient temperature Ta=25deg.C) Power consumption 10mA max. mA Output impedance 10Ω max. Ω Source current 0.2mA max. mA Sink current 2mA max. mA Response time 2 (for the reference) msec. Output span voltage *2 4.5 V Offset voltage *2,*3 *4 0.2+/-0.1125 (at 0 kPa ) V Output voltage at full scale *2,*3 *5 4.7+/-0.1125 (at rated pressure) V Accuracy *3 +/-2.5 %FS/0-85deg.C Terminal leads configuration Surface mount package DW：Differential Pressure(Positive/Negative pressure) D：Differential (Positive pressure) Pressure type Rated Pressure KP ：kPa MP ：MPa ＸＦＤＭ－０２５ＫＰ Ｄ Ｓ Ｒ Model RoHS compliance *1 Port1 pressure > Port2 pressure , Port2 pressure : reference pressure *2 Output refers to pr essure at pressure port2. *3 Excluding input voltage error. 0-85deg.C

Pre-amplified／5V Excitation／Differential XFDM Data sheet ■Outline dimensions■ ■Connection diagram■ View from Lavel Marking

Pre-amplified／5V Excitation／Differential XFDM Data sheet ■Transfer Function■ Vout = Vs×( P× α+β) ± (Pressure Error×Temperature Error Multiplier×α×Vs) V s = V c c = 5 . 0 V P=Pressure(kPa) =Port1 pressure - Port2 pressure (Port1 pressure > Port2 pressure) Output refers to pressure at pressure port2. Model Measurable pressure range(kPa) α β Pressure Error (kPa) XFDM-100KPDWSR -100 to 100 0.0045 0.49 5 XFDM-025KPDSR 0 to 25 0.036 0.04 0.625 XFDM-050KPDSR 0 to 50 0.018 0.04 1.25 XFDM-100KPDSR 0 to 100 0.009 0.04 2.5 XFDM-200KPDSR 0 to 200 0.0045 0.04 5 XFDM-001MPDSR 0 to 1000 0.0009 0.04 25 Temperature Error Multiplier

Pre-amplified／5V Excitation／Differential XFDM Data sheet ■Output characteristics■ XFDM-025KPDSR XFDM-050KPDSR XFDM-100KPDSR XFDM-200KPDSR XFDM-001MPDSR XFDM-100KPDWSR Note ; Please read instruction “Notes” before using the sensor. Fujikura reserves the right to c hange specifications without notice. Please set Zero-calibration function up your products. The offset voltage may be shifted some mechanical stress such as mounting, installation and etc. over longtime using. ↑Output voltage（mV） Rated pressure →Pressure（kPa） 0kPa Offset voltage 4.7V 0.2V Output voltage at full scale Output span voltage Atomospheric pressure Pressure(kPa) =Port1 pressure - Port2 pressure (Port1 pressure > Port2 pressure) Output refers to pressure at pressure port2. ↑Output voltage（mV） →Pressure（kPa） Offset voltage 4.7V 0.2V Output voltage at full scale Output span voltage Atomospheric pressure +100kPa-100kPa 0kPa Pressure(kPa) =Port1 pressure - Port2 pressure (Port1 pressure > Port2 pressure) Output refers to pressure at pressure port2.

Pre-amplified／5V Excitation／Differential XFDM Data sheet Reflow Soldering process recommendation profile a: Rump up rate 1 or 2 deg.C/sec. b: Pre-heating 150 to 180 deg.C,within 60 to120sec. c: Rump up rate 1 to 2 deg.C/sec. e: Rump down rate 1 or 2 deg.C/sec. Note ; 1 ) Temperatur e means Surface temperature of the sensor package. 2 ) Reflow process max. 2 times. 3 ) Do not wash the sensor. 4 ) Do not put the solder and flux on the sensor package. If you have any questions regarding technical issues or specifications, please contact us. Fujikura Ltd. Sensor Department 5-1 Kiba 1-chome, Koto-ku, Tokyo 135-8512, Japan Phone +81-(0)3-5606-1072 E-mail : sensor@fujikura.co.jp Package Surface Temperature (Degree C) 210 150 Room Temp. a b c d e 230 Time