XF9347R MTRONPTI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Specification for a 4-Pole 3rd Overtone Mode SMD Crystal Filter MtronPTI P/N: XF9347R Rev. A 07/27/11 Page 1 of 2 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI. I. GENERAL & ELECTRICAL REQUIREMENTS 1. Center Frequency (FON): 70.2MHz 2. 3dB Passband: -30C to +75C: ≤ FON 5.5kHz & ≤ FON 10.0kHz 3. Insertion Loss (@ peak of transmission within the 3dB passband): ≤ 4.0dB 4. Passband Ripple (peak-valley, FON 3.5kHz): ≤ 0.5dB 5. Coupling Capacitance: T.B.D. (Vendor to Advise After Prototype Build) 6. Group Delay Distortion (peak-peak over FON 3.0kHz) -30C to +75C: ≤ 30µsec The group delay distortion value shall be the difference between the maximum and minimum values over the specified frequency range. 7. Rejection (Minimum, Relative to Insertion Loss): 35dB: FON 25kHz to FON 500kHz 80dB: FON -910kHz 8. 3rd Order Input Intercept Point (IIP3):+26dBm The IIP3 shall be first tested with tones at fc -50kHz and -100kHz and then tested with tones at fc +50 kHz and +100kHz, , the tone level shall be -20dBm/tone at the filter input. 9. Input Signal Level: ≤ 0dBm 10. ZIN/ZOUT: T.B.D. (Ω // pF) nominal (Vendor to Advise After Prototype Build) Note 1: All electrical performance specifications, unless otherwise noted, are over the full operating temperature range . Note 2: All performance parameters are to be validated at the prototype build stage and are subject to adjustment. II. ENVIRONMENTAL & PHYSICAL REQUIREMENTS: 1. Temperature Range Operating: -30C to +75C Storage: -40C to +85C 2. Solderability: Per EIAJ-STD-002 3. Package: 5x7mm Matched Pair Tandem Set SMD (ref drawing Figure 1) 4. Full RoHS Compliance

Specification for a 4-Pole 3rd Overtone Mode SMD Crystal Filter MtronPTI P/N: XF9347R Rev. A 07/27/11 Page 2 of 2 Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence. Information may not be copied or divulged without written permission from MtronPTI. Test Circuit: