XF2H OMRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
R 0.5 mm-Pitch Rotary-Lock FPC Connector XF2H SMT ZIF (Zero Insertion Force) Connector with Rotary-Lock Improves Assembly Reliability, Manufacturing Efficiency H Rotary-lock at rear instead of front simplifies assembly, provides secure connection even if cable flexes upward H FPC housing design ensures reliable alignment of the circuits during assembly, unaffected by rotary-lock H Double-sided contacts can be used wherever top or bottom connection is needed, reducing part numbers on the bill of materials H Connector is supplied with rotary-lock in the open position, eliminating one step during assembly, improving productivity H Low profile, measures only 2 mm max. above the circuit board H Connectors supplied on tape reels for automatic insertion
Ordering Information
Circuits Part number Circuits Part number Quantity per reel
10 XF2H-1015-1 30 XF2H-3015-1 1,500 per reel
12 XF2H-1215-1 32 XF2H-3215-1
, p 13 XF2H-1315-1 33 XF2H-3315-1 Order in multiples of the quantity per reel.
14 XF2H-1415-1 34 XF2H-3415-1
Order in multiples of the quantity per reel.
18 XF2H-1815-1 35 XF2H-3515-1
20 XF2H-2015-1 36 XF2H-3615-1
21 XF2H-2115-1 38 XF2H-3815-1
22 XF2H-2215-1 40 XF2H-4015-1
24 XF2H-2415-1 45 XF2H-4515-1
26 XF2H-2615-1 50 XF2H-5015-1
Note: Connectors with different circuit counts and contact locations are available on special order. Contact your Omron representative.
Rated current 0.5 A Rated voltage 50 VDC Contact resistance 30 MΩ max. at 20 mVDC, 100 mA max. Insulation resistance 100 MΩ min. at 250 VDC Withstand voltage 250 VAC for 1 minute (with a leakage current of 1 mA max.) Insertion tolerance 20 times Ambient temperature -- 3 0°Ct o8 5°C( - - 2 2°F to 185°F); no condensation at low temperatures J MATERIALS/FINISH Housing PA46 resin (UL94V-0)/natural Slide lock LCP resin (UL94V-0)/black Contact Copper-alloy/nickel spring substrate (2µm) plated with tin alloy (2µm) Hold-down Copper-alloy/copper substrate (2µm) plated with tin alloy (2µm)
Unit: mm J XF2H- -jjjjjjjj15-1 Applicable FPC Dimensions Printed Circuit Board Matching Dimensions (Top View) C D A B 0.5 7.3 3.2 8.1 6.74 6.35 3.44 1.9 2.8 min. 0.5 (C- -0.1) B 0.5 0.35 T=0.3 ¦0.05 (Copper conductors) ¦0.03 ¦0.07 ¦0.05¦0.1 ¦0.05 B ¦0.05 E B ¦0.25 F¦0.1 0.5¦0.05 0.25 1.3 1.5 2.2 2.3 *.Pattern prohibition ¦0.1 J TABLE OF DIMENSIONS Circuits Part number A B C D E F
J TAPE AND REEL DIMENSIONS 13±0.2 (0.512) dia. Direction of drawout 3 (0.118) G (3.15) dia. 330 (12.99) dia. +0.2 4±0.1 (0.157) 2±0.1 (0.079) B±0.2 A±0.2 1.7±0.1 (0.067) C±0.2 D±0.1 E±0.1 Direction of drawout 3.7±0.1 (0.146) 6.6±0.1 (0.260) 3.2±0.1 (0.126) 4.7±0.1 (0.185) 1.5 (0.055) dia. 1.75±0.1 (0.069) 8±0.1 (0.315) F±0.3 12±0.1 (0.472) 1.5 (0.055)+0.1 +0.1 Circuits Part number A B C D E F G ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Note: *For tape widths of 24 mm (dimension F), pilot holes are located on one side only.
J RECOMMENDED REFLOW CONDITIONS Pre-heat Temperature: 150±10°C Time: 60 to 120 seconds Soldering Temperature: 200 to 240°C Time: Not exceeding 30 seconds (Not exceeding 10 seconds at 240°C maximum temperature.) J STORAGE Do not store under high humidity levels as this may cause deterioration of the insulation. J HANDLING THE FPC Do not forcibly bend or pull an FPC which has been mounted and locked. This may cause discontinuities in the FPC.
O n eE a s tC o m m e r c eD r i v e Schaumburg, IL 60173 NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. 1-800-55-OMRON OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8 416-286-6465 R OMRON ON-LINE Global - - http://www.omron.com USA - - http://www.omron.com/oei Canada - - http://www.omron.com/oci