XCSRC10M12 SCHNEIDER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Feb 8, 2021 Product data sheet Characteristics XCSRC10M12 Safety RFID contactless switch - Single model - Unique pairing Main Range of product Preventa Safety detection Product or component type Preventa RFID safety switch Component name XCSRC Complementary Design Rectangular, standard Size Transponder: 50 x 15 x 15 mm Reader: 108.3 x 30 x 15 mm Material Valox Electrical connection 1 male connector Connector type M12 male Type of output stage Solid-state, PNP Safety outputs 2 NO Number of poles 5 Local signalling Green, orange and red 2 multi-colour LEDs [Sao] assured operating sensing distance 10 mm face to face [Sar] assured release sensing distance 35 mm face to face Approach directions 3 directions-transponder with rotary sensing face [Ue] rated operational voltage 24 V DC (- 20...10 %)SELV or PELV conforming to EN/IEC 60204-1 [Ie] rated operational current 60 mA [Ui] rated insulation voltage 30 V DC [Uimp] rated impulse withstand voltage 0.8 kV IEC 60947-5-2 Protection type Short-circuit protection Maximum switching voltage 26.4 V DC Switching capacity in mA 200 mA Switching frequency <= 0.5 Hz risk time 120 ms Response time 120 ms typical Maximum delay first up 5 s Tightening torque < 1.5 N.m Standards EN/IEC 60947-5-2 ISO 14119 EN/IEC 60947-5-3 Product certifications EAC TÜV FCC IC CSA 22-2 Ecolab RCM

TÜV RCM EAC IC CE CULus Safety level SIL 3 conforming to EN/IEC 61508 SILCL 3 conforming to EN/IEC 62061 PL = e conforming to EN/ISO 13849-1 Category 4 conforming to EN/ISO 13849-1 Safety reliability data PFH<SUB>D</SUB> = 5E-10/h conforming to EN/IEC 62061 PFH<SUB>D</SUB> = 5E-10/h conforming to EN/ISO 13849-1 Mission time 20 year(s) Ambient air temperature for operation -25…70 °C Ambient air temperature for storage -40…85 °C Vibration resistance 10 gn (f= 10…150 Hz) conforming to EN/IEC 60068-2-6 Shock resistance 30 gn for 11 ms conforming to EN/IEC 60068-2-27 Electrical shock protection class Class III conforming to EN/IEC 61140 IP degree of protection IP65 conforming to EN/IEC 60529 IP66 conforming to EN/IEC 60529 IP67 conforming to EN/IEC 60529 IP69K conforming to DIN 40050 Packing Units Unit Type of Package 1 PCE Number of Units in Package 1 1 Package 1 Weight 106 g Package 1 Height 3.7 cm Package 1 width 14.9 cm Package 1 Length 18 cm Unit Type of Package 2 S01 Number of Units in Package 2 12 Package 2 Weight 1.427 kg Package 2 Height 15 cm Package 2 width 15 cm Package 2 Length 40 cm Offer Sustainability Sustainable offer status Green Premium product REACh Regulation REACh Declaration EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope) EU RoHS Declaration Mercury free Yes RoHS exemption information Yes Environmental Disclosure Product Environmental Profile

M12 Connector, 5-pin (1) + 24 VDC (2) OSSD2 (3) 0 VDC (4) OSSD1 (5) NC (Not connected) Connections Wiring Diagram: Connection to a Safety Relay Cat. 4 / PL=e (EN/ISO 13849-1) / SIL3 (IEC 61508) / SILCL3 IEC 62061), if combined with an appropriate Preventa XPS Safety unit PL=e / SIL3 (1) Transponder (2) Reader (3) Logic (4) Start (5) ESC: External start conditions (6) H1: indicator light deactivated (7) Fuse. Operating status of internal electronic fuse (8) To PLC (9) Power circuit NOTE: KM1 and KM2 contactors must have force-guided contacts. Connections Wiring Diagram: Connection to a Safety Controller Cat. 4 / PL=e (EN/ISO 13849-1) / SIL3 (IEC 61508) / SILCL3 IEC 62061), if combined with an appropriate Preventa XPS Safety controller PL=e / SIL3

(1) Power supply (2) 1 A max. (3) Safety controller (4) Feedback (5) Restart (6) Reader (7) Transponder (8) Power circuit NOTE: KM1 and KM2 contactors must have force-guided contacts.

Face to Face Mounting (Preferred Configuration) Example n°1 Example n°2 e: Recommended minimum mounting distance between transponder and reader. e: Recommended minimum mounting distance between transponder and reader.

Face to Face Mounting (Preferred Configuration) Example n°3 e min. > 2 mm. (e: recommended minimum mounting distance between transponder and reader) d : Detection limit Mounting and Clearance Side by Side Mounting Correct Mounting Configuration

e: Recommended minimum mounting distance between transponder and reader. Mounting and Clearance Minimum Mounting Clearances between Safety Switches Dimensions in mm E1 min. E2 min. E3 min. 45 150 65

Dimensions in in. E1 min. E2 min. E3 min. 1.77 5.91 2.56

Face to Face Mounting (Preferred Configuration) Sao and Sar sensing distances along Y axis as function of Z (longitudinal misalignment for X=0) Sar: Assured release distance Sao: Assured operating distance (1) Recommended minimum mounting distance between transponder and reader. Sao and Sar sensing distances along X axis as function of Z (transverse misalignment for Y=0)

Sar: Assured release distance Sao: Assured operating distance (1) Recommended minimum mounting distance between transponder and reader. Detection Curves Side by Side Mounting Sao and Sar sensing distances along Y axis as function of X (longitudinal misalignment for Z=0mm) Sar: Assured release distance Sao: Assured operating distance (1) X=0 for X<0 (2) X=0 for X>0 (3) Recommended minimum mounting distance between transponder and reader. Sao and Sar sensing distances along Z axis as function of X (transverse misalignment for Y=0mm)

Sar: Assured release distance Sao: Assured operating distance (1) X=0 for X<0 (2) X=0 for X>0 (3) Recommended minimum mounting distance between transponder and reader.