XBH

XBH CREE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 25

Technical content

© 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 1 XLamp® XB-H LEDs PRODUCT DESCRIPTION The XLamp ® XB-H LED delivers a breakthrough combination of lumen output and efficacy in a small package. Delivering more than 500 lumens at 1.5 A, 25 °C in a 2.45 mm2 package, the XB-H LED offers triple the lumen density of competing high-power LEDs to significantly increase the performance of today’s lighting designs. The XB-H LED joins a new generation of directionally optimized LEDs that offers the industry’s highest optical control factor (OCF), a measurement of how LED size and performance benefit directional lighting applications. High-OCF LEDs enable lighting manufacturers to improve the performance of any lighting design, create smaller and less expensive systems, and develop new lighting solutions that were previously not possible.

FEATURES

• Available in white, outdoor white and 80-, 85- and 90-CRI white
• ANSI-compatible chromaticity bins
• Binned at 85 °C
• Maximum drive current: 1500 mA
• Low thermal resistance: 3.5 °C/W
• Wide viewing angle: 110°
• Unlimited floor life at ≤ 30 ºC/85% RH
• Reflow solderable - JEDEC J-STD-020C
• Electrically neutral thermal path
• RoHS and REACH compliant
• UL® recognized component (E349212) TABLE OF CONTENTS Relative Chromaticity vs Current and Standard Cool White Kits Plotted on ANSI Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 2 CHARACTERISTICS Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point◊ °C/W 3.5 Viewing angle (FWHM) degrees 110 Temperature coefficient of voltage mV/°C -1.3 ESD withstand voltage (HBM per Mil-Std-883D) Class 3B DC forward current mA 1500 Reverse voltage V 1 Forward voltage (@ 700 mA, 85 °C) V 2.86 3.3 Forward voltage (@ 1000 mA, 85 °C) V 2.95 Forward voltage (@ 1500 mA, 85 °C) V 3.08 LED junction temperature °C 150 Note: ◊ Thermal resistance measurement was performed per the JEDEC JESD51-14 standard. See the Thermal Resistance Measurement application note for more details. Thermal resistance value from: 20220826 datasheet update summary.xlsx

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 3 Notes:

• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 19).
• XLamp XB-H LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or bin restrictions specified by the order code.
• Typical CRI for Cool White (5000 K - 5700 K CCT) is 70.
• Typical CRI for Neutral White (3700 K - 5300 K CCT) is 75.
• Typical CRI for Warm White (2600 K - 3700 K CCT) is 80. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 1 A and 1.5 A are for reference only. FLUX CHARACTERISTICS (T J = 85 °C) The following tables provide order codes for XLamp XB-H LEDs. For a complete description of the order-code nomenclature, please consult the Bin and Order Code Formats section (page 17). Chromaticity Minimum Luminous Flux (lm) @ 700 mA Calculated Minimum Luminous Flux (lm) @ 85 °C Order Codes Kit CCT Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 1.0 A 1.5 A No CRI Minimum Standard CRI 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum E2 5700 K T6 280 322 372 499 XBHAWT-00- 0000-000L T60E2 T5 260 299 345 463 XBHAWT-00- 0000-000L T50E2 T4 240 276 318 428 XBHAWT-00- 0000-000L T40E2 T3 220 253 292 392 XBHAWT-00- 0000-000L T30E2 E3 5000 K T6 280 322 372 499 XBHAWT-00- 0000-0000T60E3 XBHAWT-00- 0000-000L T60E3 T5 260 299 345 463 XBHAWT-00- 0000-0000T50E3 XBHAWT-00- 0000-000L T50E3 T4 240 276 318 428 XBHAWT-00- 0000-0000T40E3 XBHAWT-00- 0000-000L T40E3 T3 220 253 292 392 XBHAWT-00- 0000-0000T30E3 XBHAWT-00- 0000-000L T30E3 F4 4750 K T6 280 322 372 499 XBHAWT-00- 0000-0000T60F4 T5 260 299 345 463 XBHAWT-00- 0000-0000T50F4 T4 240 276 318 428 XBHAWT-00- 0000-0000T40F4 T3 220 253 292 392 XBHAWT-00- 0000-0000T30F4 E4 4500 K T6 280 322 372 499 XBHAWT-00- 0000-0000T60E4 XBHAWT-00- 0000-000L T60E4 T5 260 299 345 463 XBHAWT-00- 0000-0000T50E4 XBHAWT-00- 0000-000L T50E4 T4 240 276 318 428 XBHAWT-00- 0000-0000T40E4 XBHAWT-00- 0000-000L T40E4 T3 220 253 292 392 XBHAWT-00- 0000-0000T30E4 XBHAWT-00- 0000-000L T30E4

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 4 Notes:

• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 19).
• XLamp XB-H LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or bin restrictions specified by the order code.
• Typical CRI for Cool White (5000 K - 5700 K CCT) is 70.
• Typical CRI for Neutral White (3700 K - 5300 K CCT) is 75.
• Typical CRI for Warm White (2600 K - 3700 K CCT) is 80. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 1 A and 1.5 A are for reference only. Chromaticity Minimum Luminous Flux (lm) @ 700 mA Calculated Minimum Luminous Flux (lm) @ 85 °C Order Codes Kit CCT Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 1.0 A 1.5 A No CRI Minimum Standard CRI 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum F5 4300 K T6 280 322 372 499 XBHAWT-00- 0000-0000T60F5 T5 260 299 345 463 XBHAWT-00- 0000-0000T50F5 XBHAWT-00- 0000-000L T50F5 T4 240 276 318 428 XBHAWT-00- 0000-0000T40F5 XBHAWT-00- 0000-000L T40F5 T3 220 253 292 392 XBHAWT-00- 0000-0000T30F5 XBHAWT-00- 0000-000L T30F5 E5 4000 K T6 280 322 372 499 XBHAWT-00- 0000-0000T60E5 T5 260 299 345 463 XBHAWT-00- 0000-0000T50E5 XBHAWT-00- 0000-000L T50E5 T4 240 276 318 428 XBHAWT-00- 0000-0000T40E5 XBHAWT-00- 0000-000L T40E5 XBHAWT-00- 0000-000HT40E5 T3 220 253 292 392 XBHAWT-00- 0000-0000T30E5 XBHAWT-00- 0000-000L T30E5 XBHAWT-00- 0000-000HT30E5 Z5 4000 K T4 240 276 318 428 XBHAWT-00- 0000-000L T40Z5 XBHAWT-00- 0000-000HT40Z5 T3 220 253 292 392 XBHAWT-00- 0000-000L T30Z5 XBHAWT-00- 0000-000HT30Z5 F6 3700 K T5 260 299 345 463 XBHAWT-00- 0000-0000T50F6 T4 240 276 318 428 XBHAWT-00- 0000-0000T40F6 XBHAWT-00- 0000-000HT40F6 T3 220 253 292 392 XBHAWT-00- 0000-0000T30F6 XBHAWT-00- 0000-000HT30F6 T2 200 230 265 356 XBHAWT-00- 0000-0000T20F6 XBHAWT-00- 0000-000HT20F6 E6 3500 K T5 260 299 345 463 XBHAWT-00- 0000-0000T50E6 T4 240 276 318 428 XBHAWT-00- 0000-0000T40E6 XBHAWT-00- 0000-000HT40E6 T3 220 253 292 392 XBHAWT-00- 0000-0000T30E6 XBHAWT-00- 0000-000HT30E6 T2 200 230 265 356 XBHAWT-00- 0000-0000T20E6 XBHAWT-00- 0000-000HT20E6 FLUX CHARACTERISTICS (T J = 85 °C) - CONTINUED

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 5 Notes:

• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 19).
• XLamp XB-H LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or bin restrictions specified by the order code.
• Typical CRI for Cool White (5000 K - 5700 K CCT) is 70.
• Typical CRI for Neutral White (3700 K - 5300 K CCT) is 75.
• Typical CRI for Warm White (2600 K - 3700 K CCT) is 80. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 1 A and 1.5 A are for reference only. FLUX CHARACTERISTICS (T J = 85 °C) - CONTINUED Chromaticity Minimum Luminous Flux (lm) @ 700 mA Calculated Minimum Luminous Flux (lm) @ 85 °C Order Codes Kit CCT Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 1.0 A 1.5 A No CRI Minimum Standard CRI 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum Z6 3500 K T3 220 253 292 392 XBHAWT-00- 0000-000HT30Z6 T2 200 230 265 356 XBHAWT-00- 0000-000HT20Z6 F7 3200 K T5 260 299 345 463 XBHAWT-00- 0000-0000T50F7 T4 240 276 318 428 XBHAWT-00- 0000-0000T40F7 T3 220 253 292 392 XBHAWT-00- 0000-0000T30F7 XBHAWT-00- 0000-000HT30F7 T2 200 230 265 356 XBHAWT-00- 0000-0000T20F7 XBHAWT-00- 0000-000HT20F7 E7 3000 K T5 260 299 345 463 XBHAWT-00- 0000-0000T50E7 T4 240 276 318 428 XBHAWT-00- 0000-0000T40E7 T3 220 253 292 392 XBHAWT-00- 0000-0000T30E7 XBHAWT-00- 0000-000HT30E7 T2 200 230 265 356 XBHAWT-00- 0000-0000T20E7 XBHAWT-00- 0000-000HT20E7 XBHAWT-00- 0000-000PT20E7 S6 182 209 242 324 XBHAWT-00- 0000-000PS60E7 XBHAWT-00- 0000-000US60E7 S5 172 198 228 306 XBHAWT-00- 0000-000PS50E7 XBHAWT-00- 0000-000US50E7 S4 164 186 218 292 XBHAWT-00- 0000-000US40E7 Z7 3000 K T3 220 253 292 392 XBHAWT-00- 0000-000HT30Z7 T2 200 230 265 356 XBHAWT-00- 0000-000HT20Z7 S6 182 209 242 324 XBHAWT-00- 0000-000PS60Z7 XBHAWT-00- 0000-000US60Z7 S5 172 198 228 306 XBHAWT-00- 0000-000PS50Z7 XBHAWT-00- 0000-000US50Z7 S4 164 186 218 292 XBHAWT-00- 0000-000US40Z7

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 6 Notes:

• Cree LED maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements. See the Measurements section (page 19).
• XLamp XB-H LED order codes specify only a minimum flux bin and not a maximum. Cree LED may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity or bin restrictions specified by the order code.
• Typical CRI for Cool White (5000 K - 5700 K CCT) is 70.
• Typical CRI for Neutral White (3700 K - 5300 K CCT) is 75.
• Typical CRI for Warm White (2600 K - 3700 K CCT) is 80. * Flux values @ 25 °C are calculated and for reference only. Calculated flux values at 1 A and 1.5 A are for reference only. FLUX CHARACTERISTICS (T J = 85 °C) - CONTINUED Chromaticity Minimum Luminous Flux (lm) @ 700 mA Calculated Minimum Luminous Flux (lm) @ 85 °C Order Codes Kit CCT Code Flux (lm) @ 85 °C Flux (lm) @ 25 °C* 1.0 A 1.5 A No CRI Minimum Standard CRI 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum F8 2850 K T3 220 253 292 392 XBHAWT-00- 0000-000HT30F8 T2 200 230 265 356 XBHAWT-00- 0000-000HT20F8 S6 182 209 242 324 XBHAWT-00- 0000-000HS60F8 XBHAWT-00- 0000-000PS60F8 XBHAWT-00- 0000-000US60F8 S5 172 198 228 306 XBHAWT-00- 0000-000PS50F8 XBHAWT-00- 0000-000US50F8 S4 164 186 218 292 XBHAWT-00- 0000-000PS40F8 XBHAWT-00- 0000-000US40F8 E8 2700 K T3 220 253 292 392 XBHAWT-00- 0000-000HT30E8 T2 200 230 265 356 XBHAWT-00- 0000-000HT20E8 S6 182 209 242 324 XBHAWT-00- 0000-000HS60E8 XBHAWT-00- 0000-000PS60E8 XBHAWT-00- 0000-000US60E8 S5 172 198 228 306 XBHAWT-00- 0000-000PS50E8 XBHAWT-00- 0000-000US50E8 S4 164 186 218 292 XBHAWT-00- 0000-000PS40E8 XBHAWT-00- 0000-000US40E8 Z8 2700 K T3 220 253 292 392 XBHAWT-00- 0000-000HT30Z8 T2 200 230 265 356 XBHAWT-00- 0000-000HT20Z8 S6 182 209 242 324 XBHAWT-00- 0000-000HS60Z8 XBHAWT-00- 0000-000PS60Z8 S5 172 198 228 306 XBHAWT-00- 0000-000PS50Z8 XBHAWT-00- 0000-000US50Z8 S4 164 186 218 292 XBHAWT-00- 0000-000PS40Z8 XBHAWT-00- 0000-000US40Z8

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 7 RELATIVE SPECTRAL POWER DISTRIBUTION RELATIVE FLUX VS. JUNCTION TEMPERATURE (I F = 700 mA) Relative Spectral Power 20% 40% 60% 80% 100% 380 430 480 530 580 630 680 730 780 Relative Radiant Power Wavelength (nm) Cool White Warm White Relative Flux Output vs. Junction Temperature 20% 40% 60% 80% 100% 120% 25 50 75 100 125 150 Relative Luminous Flux Junction Temperature (ºC)

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 8 ELECTRICAL CHARACTERISTICS (T J = 85 °C) RELATIVE FLUX VS. CURRENT (T J = 85 °C) Electrical Characteristics (Tj = 25ºC) 300 600 900 1200 1500 Forward Current (mA) Forward Voltage (V) Relative Intensity vs. Current (Tj = 85ºC) 20% 40% 60% 80% 100% 120% 140% 160% 180% 200% 0 300 600 900 1200 1500 Relative Luminous Flux Forward Current (mA)

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 9 RELATIVE CHROMATICITY VS CURRENT AND TEMPERATURE (WARM WHITE*) * Warm White XLamp XB-H LEDs have a typical CRI of 80. Delta CCT vs. Current -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 100 300 500 700 900 1100 1300 1500 Current (mA) ΔCCx ΔCCy Delta CCT vs Temp -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 25 50 75 100 125 150 Tsp (°C) ΔCCx ΔCCy

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 10 TYPICAL SPATIAL DISTRIBUTION THERMAL DESIGN The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. Typical Spatial Radiation Pattern 20% 40% 60% 80% 100% -90 -60 -30 0 30 60 90 Relative Luminous Intensity Angle (º) Thermal Design 200 400 600 800 1000 1200 1400 1600 0 20 40 60 80 100 120 140 160 Maximum Current (mA) Ambient Temperature (ºC) Rj-a = 10 °C/W Rj-a = 15 °C/W Rj-a = 20 °C/W Rj-a = 25 °C/W

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 11 PERFORMANCE GROUPS – LUMINOUS FLUX XLamp XB-H LEDs are tested for luminous flux and placed into one of the following luminous-flux groups. These groups, appended with a 0, are used in the Bin Code “Luminous or radiant flux group.” Group Code Minimum Luminous Flux (lm) @ 700 mA Maximum Luminous Flux (lm) @ 700 mA S4 164 172 S5 172 182 S6 182 200 T2 200 220 T3 220 240 T4 240 260 T5 260 280 T6 280 300 U2 300 320 PERFORMANCE GROUPS – CHROMATICITY Region x y Region x y Region x y Region x y 0.3215 0.3350 0.3207 0.3462 0.3290 0.3538 0.3290 0.3417 0.3222 0.3243 0.3196 0.3602 0.3290 0.3690 0.3290 0.3300 0.3371 0.3490 0.3376 0.3616 0.3463 0.3687 0.3451 0.3554 0.3366 0.3369 0.3381 0.3762 0.3480 0.3840 0.3440 0.3428 0.3530 0.3597 0.3548 0.3736 0.3641 0.3804 0.3615 0.3659

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 12 Region x y Region x y Region x y Region x y 0.3512 0.3465 0.3571 0.3907 0.3668 0.3957 0.3590 0.3521 5A1 0.3670 0.3578 5A2 0.3686 0.3649 5A3 0.3744 0.3685 5A4 0.3726 0.3612 5B1 0.3702 0.3722 5B2 0.3719 0.3797 5B3 0.3782 0.3837 5B4 0.3763 0.3760 5C1 0.3825 0.3798 5C2 0.3847 0.3877 5C3 0.3912 0.3917 5C4 0.3887 0.3836 5D1 0.3783 0.3646 5D2 0.3804 0.3721 5D3 0.3863 0.3758 5D4 0.3840 0.3681 0.3670 0.3578 0.3771 0.4034 0.3916 0.4127 0.3783 0.3646 6A1 0.3889 0.3690 6A2 0.3915 0.3768 6A3 0.3981 0.3800 6A4 0.3953 0.3720 6B1 0.3941 0.3848 6B2 0.3968 0.3930 6B3 0.4040 0.3966 6B4 0.4010 0.3882 6C1 0.4080 0.3916 6C2 0.4113 0.4001 6C3 0.4186 0.4037 6C4 0.4150 0.3950 6D1 0.4017 0.3751 6D2 0.4048 0.3832 6D3 0.4116 0.3865 6D4 0.4082 0.3782 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 13 Region x y Region x y Region x y Region x y 0.3889 0.3690 0.4054 0.4191 0.4217 0.4273 0.4017 0.3751 0.4221 0.3985 0.4299 0.4165 0.4430 0.4212 0.4342 0.4028 7A1 0.4147 0.3814 7A2 0.4183 0.3898 7A3 0.4242 0.3919 7A4 0.4203 0.3833 7B1 0.4221 0.3984 7B2 0.4259 0.4073 7B3 0.4322 0.4096 7B4 0.4281 0.4006 7C1 0.4342 0.4028 7C2 0.4385 0.4119 7C3 0.4449 0.4141 7C4 0.4403 0.4049 7D1 0.4259 0.3853 7D2 0.4300 0.3939 7D3 0.4359 0.3960 7D4 0.4316 0.3873 0.4465 0.4071 0.4562 0.4260 0.4687 0.4289 0.4582 0.4099 8A1 0.4373 0.3893 8A2 0.4418 0.3981 8A3 0.4475 0.3994 8A4 0.4428 0.3906 8B1 0.4465 0.4071 8B2 0.4513 0.4164 8B3 0.4573 0.4178 8B4 0.4523 0.4085 8C1 0.4582 0.4099 8C2 0.4634 0.4193 8C3 0.4695 0.4207 8C4 0.4641 0.4112 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 14 PERFORMANCE GROUPS – CHROMATICITY (CONTINUED) Region x y Region x y Region x y Region x y 8D1 0.4483 0.3919 8D2 0.4532 0.4008 8D3 0.4589 0.4021 8D4 0.4538 0.3931 STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 5000 K 5700 K 6500 K 8000 K 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 CCy CCx ANSI C78.377A

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 15 STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A E8E7 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 16 STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS - CONTINUED 2700 K 3000 K 3500 K 4000 K 4500 K 5000 K 4D 5A1 5A2 5A3 5A4 5B1 5B2 5B3 5B4 5C1 5C2 5C3 5C4 5D1 5D2 5D3 5D4 6A1 6A2 6A3 6A4 6B1 6B2 6B3 6B4 6C1 6C2 6C3 6C4 6D1 6D2 6D3 6D4 7A1 7A2 7A3 7A4 7B1 7B2 7B3 7B4 7C1 7C2 7C3 7C4 7D1 7D2 7D3 7D4 8A1 8A2 8A3 8A4 8B1 8B2 8B3 8B4 8C1 8C2 8C3 8C4 8D1 8D2 8D3 8D4 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.33 0.34 0.35 0.36 0.37 0.38 0.39 0.40 0.41 0.42 0.43 0.44 0.45 0.46 0.47 0.48 0.49 CCy CCx ANSI C78.377A

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 17 STANDARD CHROMATICITY KITS The following table provides the chromaticity bins associated with chromaticity kits, which are specified as part of the order code. Color Kit Chromaticity Bins Cool White E2 2A, 2B, 2C, 2D Neutral White E3 3A, 3B, 3C, 3D F4 3C, 3D, 4A, 4B E4 4A, 4B, 4C, 4D F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4 E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4 Z5 5A3, 5B4, 5C1, 5D2 Warm White F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4 E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4 Z6 6A3, 6B4, 6C1, 6D2 F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4 E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4 Z7 7A3, 7B4, 7C1, 7D2 F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4 E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 Z8 8A3, 8B4, 8C1, 8D2 BIN AND ORDER CODE FORMATS Bin codes and order codes for XB-H LEDs are configured in the following manner: Order Code Bin Code SSSCCC-BD-HHHH-NNNGFFWWW Series XBH = XB-H Internal code Luminous flux group Chromaticity group Color specification 0 = No CRI minimum L = Standard CRI H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Internal code Color AWT = White SSSCCC-B-WWW-FFF-GG-AAAA Series XBH = XB-H Internal code Luminous flux group Color specification 0 = No CRI minimum L = Standard CRI H = 80 CRI minimum P = 85 CRI minimum U = 90 CRI minimum Internal code Chromaticity group Color AWT = White Example Order Code: XBHAWT-00-0000-000HT20E7 Example Bin Code: XBHAWT-0-7A3-T20-0H-0001 bin and order code headings, diagrams & examples are in a table

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 18 REFLOW SOLDERING CHARACTERISTICS In testing, Cree LED has found XLamp XB-H LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree LED recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. Profile Feature Lead-Free Solder Average Ramp-Up Rate (Tsmax to Tp) 1.2 °C/second Preheat: Temperature Min (Tsmin) 120 °C Preheat: Temperature Max (Tsmax) 170 °C Preheat: Time (tsmin to tsmax) 65-150 seconds Time Maintained Above: Temperature (TL) 217 °C Time Maintained Above: Time (tL) 45-90 seconds Peak/Classification Temperature (Tp) 235 - 245 °C Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds Ramp-Down Rate 1 - 6 °C/second Time 25 °C to Peak Temperature 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. IPC/JEDEC J-STD-020C TP TL Temperature Time t 25˚C to Peak Preheat ts tL tP Ramp-down Ramp-up Critical Zone TL to TP Tsmax Tsmin

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 19 NOTES Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree LED’s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. Pre-Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree LED applies to ensure long-term reliability for XLamp LEDs and details of Cree LED’s pre-release qualification testing for XLamp LEDs. Lumen Maintenance Cree LED now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance. For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document. Please read the Long-Term Lumen Maintenance application note for more details on Cree LED’s lumen maintenance testing and forecasting. Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect the LED junction temperature. Moisture Sensitivity Cree LED recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XB-H LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree LED recommends sealing any unsoldered LEDs in the original MBP . RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product Ecology section of the Cree LED website. REACH Compliance REACH substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree LED representative to insure you get the most up-to-date REACH SVHC Declaration. REACH banned substance information (REACH Article 67) is also available upon request.

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 20 UL® Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL 8750. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. NOTES - CONTINUED

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 21 MECHANICAL DIMENSIONS Thermal vias, if present, are not shown on these drawings. All measurements are ±.13 mm. unless otherwise indicated. Top View Side View 2.45 2.45 TOP VIEW OPTICAL MODEL ORIGIN R1.53 2.28 0.75 0.58 SIDE VIEW OPTICAL MODEL ORIGIN 2.29 2.29 0.36 0.92 0.33 0.46 BOTTOM VIEW ANODE SIDE CATHODE SIDE 2.29 2.29 ALTERNATE BOTTOM VIEW ANODE SIDE CATHODE SIDE CENTER PAD IS ELECTRICALLY ISOLATEDA A B B 2610-250002 XB-H 2525 2.45 2.45 TOP VIEW OPTICAL MODEL ORIGIN R1.53 2.28 0.75 0.58 SIDE VIEW OPTICAL MODEL ORIGIN 2.29 2.29 0.36 0.92 0.33 0.46 BOTTOM VIEW ANODE SIDE CATHODE SIDE 2.29 2.29 ALTERNATE BOTTOM VIEW ANODE SIDE CATHODE SIDE CENTER PAD IS ELECTRICALLY ISOLATEDA A B B 2610-250002 XB-H 2525 Bottom View Alternate Bottom View 2.45 2.45 TOP VIEW OPTICAL MODEL ORIGIN R1.53 2.28 0.75 0.58 SIDE VIEW OPTICAL MODEL ORIGIN 2.29 2.29 0.36 0.92 0.33 0.46 BOTTOM VIEW ANODE SIDE CATHODE SIDE 2.29 2.29 ALTERNATE BOTTOM VIEW ANODE SIDE CATHODE SIDE CENTER PAD IS ELECTRICALLY ISOLATEDA A B B 2610-250002 XB-H 2525 2.45 2.45 TOP VIEW OPTICAL MODEL ORIGIN R1.53 2.28 0.75 0.58 SIDE VIEW OPTICAL MODEL ORIGIN 2.29 2.29 0.36 0.92 0.33 0.46 BOTTOM VIEW ANODE SIDE CATHODE SIDE 2.29 2.29 ALTERNATE BOTTOM VIEW ANODE SIDE CATHODE SIDE CENTER PAD IS ELECTRICALLY ISOLATEDA A B B 2610-250002 XB-H 2525

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 22 MECHANICAL DIMENSIONS - CONTINUED Recommended PCB Footprint Recommended Solder Stencil 2.29 0.36 0.33 0.92 2.29 2.29 2.29 0.39 0.85 0.85 0.25 0.17 RECOMMENDED PCB FOOTPRINT RECOMMENDED SOLDER STENCIL A A B B 2610-250002 XBH2525 2.29 0.36 0.33 0.92 2.29 2.29 2.29 0.39 0.85 0.85 0.25 0.17 RECOMMENDED PCB FOOTPRINT RECOMMENDED SOLDER STENCIL A A B B 2610-250002 XBH2525

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 23 TAPE AND REEL All Cree LED carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard. All dimensions are ±.15 mm unless otherwise indicated. Item Ao Bo Ko Po P1 P2 T E F Do D1 W R Ao P2Po Do Bo Ko W F E 1) All Cree LED carrier tapes conform to EIA-481D, Automated Component handling Systems Standard NOTICE ITEM Dim. F Do Ao A-A SECTION ITEM Dim. Bo D1 W DETAIL"I" Ko Po R "I" AA DETAIL"H" P2P1 T E B B-B SECTION "H" T Ao (on a place in the bottom of the corner radii) Bo (on a place in the bottom of the corner radii) R R Anode side 2) Measurement tolerances unless indicated otherwise: .xx = ±.15 mm 2402-M010 XBH 5.50 1.50 1.50 12.00 4deg

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 24 TAPE AND REEL - CONTINUED 13 mm Cover Tape Pocket Tape END START Feed Direction Feed Direction Trailer Min. 160 mm empty pockets sealed with tape Loaded Pockets

1000 Lamps

Min. 400 mm empty pockets with min. 100 mm sealed

XLAMP ® XB-H LED © 2014-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp®, and the Cree LED logo are registered trademarks of Cree LED. UL® and the UL logo are registered trademarks of UL LLC. CLD-DS90 REV 7 25 PACKAGING