DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

100W Constant Power Mode LED Driver XBG -100 seri es File Name:XBG-100-SPEC 2020-01-02   IP67  

100W Constant Power Mode LED Driver XBG -1 00 seri es SPECIFICATION MODEL DEFAULT CURRENT RATED POWER FULL POWER CURRENT RANGE OUTPUT CURRENT ADJ. RANGE VOLTAGE RANGE Note.2 FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.) AC CURRENT (Typ.) INPUT INRUSH CURRENT(Typ.) LEAKAGE CURRENT SAFETY STANDARDS WORKING HUMIDITY STORAGE TEMP., HUMIDITY VIBRATION MTBF DIMENSIONOTHERS OVER VOLTAGE OVER TEMPERATURE 875~2780mA 47 ~ 63Hz 1.1A / 115VAC 0.5A / 230VAC 0.42A / 277VAC <0.75mA / 277VAC 20 ~ 95% RH non-condensing -40 ~ +80℃, 10 ~ 95% RH non-condensing 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes 727.29K hrs min. Telcordia SR-332(Bellcore) ;188.8K hrs min. MIL-HDBK-217F (25℃) ENVIRONMENT SAFETY & EMC PROTECTION SHORT CIRCUIT 92% 2100mA 100W 1750~2780mA COLD START 50A(twidth=400 s measured at 50% Ipeak) at 230VAC; Per NEMA 410 TOTAL HARMONIC DISTORTION WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:3.75KVAC I/P-PE:2KVAC O/P-PE:1.5KVAC I/P-O/P, I/P-PE, O/P-PE:100M Ohms / 500VDC / 25℃/ 70% RH CONSTANT CURRENT REGION PACKING 0.8Kg; 16pcs/ 14.8Kg/1.57CUFT NOTE μ MAX. NO. of PSUs on 16A CIRCUIT BREAKER 8 unit(circuit breaker of type B) / 14 units(circuit breaker of type C) at 230VAC Constant current limiting or Hiccup mode, recovers automatically after fault condition is removed (Please refer to "STATIC CHARACTERISTIC" section) 90 ~ 305VAC 27 ~ 56V OPEN CIRCUIT VOLTAGE (max.) 60V 61 ~ 78V Shut down output voltage, re-power on after fault condition is removed to recover TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 60℃) WORKING TEMP. Tcase=-40 ~ +85℃(Please refer to "OUTPUT LOAD vs TEMPERATURE" section) MAX. CASE TEMP. Tcase=+85℃ PF 0.97 / 115VAC, PF 0.95 / 230VAC full load≧ ≧ , PF≧0.92 / 277VAC at (Please refer to " " )Power Factor Characteristic section THD< 10% (@ load≧50% at 115VAC/230VAC ,@load≧75% at 277VAC) Please refer to “TOTAL HARMONIC DISTORTION (THD)” section CURRENT RIPPLE 3.0% max. @rated current CURRENT TOLERANCE ±5% SET UP TIME Note.4 500ms/230VAC, 1200ms/115VAC STANDBY POWER CONSUMPTION Standby power consumption<0.5W for AB-Type UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1,GB19510.14; IP67 approved LIFETIME Note.5 50000 hrs min. φ130mm *56mm(D*H) XBG-100- - EMC IMMUNITY EMC EMISSION Parameter Conducted Radiated Harmonic Current Voltage Flicker EN61547 Parameter ESD Radiated EFT/Burst Surge Conducted Magnetic Field Voltage Dips and Interruptions Standard EN61000-3-2 EN61000-3-3 Standard EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 Test Level/Note ----- ----- Class C @load≥50% ----- Test Level/Note Level 3, 8KV air ; Level 2, 4KV contact Level 3 Level 3 4KV/Line-Line 6KV/Line-Earth Level 3 Level 4 >95% dip 0.5 periods, 30% dip 25 periods, >95% interruptions 250 periods EN55015(CISPR15) EN55015(CISPR15) OVER POWER Hiccup mode, recovers automatically after fault condition is removed 105-150% File Name:XBG-100-SPEC 2020-01-02 Shut down output voltage, re-power on after fault condition is removed to recover

PFC fosc : 45~50KHz PWM fosc : 60~130KHz 875mA,56V 1750mA,56V 2780mA,36V 2780mA,27V1750mA,27V 20V 25V 30V 35V 40V 45V 50V 55V 60V 0mA 500mA 1000mA 1500mA 2000mA 2500mA 3000mA 100W Constant Power Mode LED Driver XBG-100 series File Name:XBG-100-SPEC 2020-01-02 (AB Type) DETECTIONPWM CIRCUIT/OTP O.L.P. EMI FILTER RECTIFIERS POWER SWITCHING FILTER RECTIFIERS +V -VI/P PE CONTROL O.V.P. & PFC CIRCUIT PFC CONTROL DRIVING METHODS OF LED MODULE ※ -I V Operating Area ◎ XBG-100 High Performance Region DIM+ DIM-O.C.P.

100W Constant Power Mode LED Driver XBG -100 seri es File Name:XBG-100-SPEC 2020-01-02 DIMMING OPERATION ※ 3 in 1 dimming function (for AB-Type) ‧Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. ‧Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. ‧Dimming source current from power supply: 100 A (typ.)μ ◎ Applying additive 0 ~ 10VDC ◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): ◎ Applying additive resistance: Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%. 2. The output current could drop down to 0% when dimming input is about 0Ω or 0Vdc, or 10V PWM signal with 0% duty cycle. Vo+ Vo- DIM+ DIM- + + - - “DO NOT connect "DIM- to Vo-" Additive Voltage Vo+ Vo- DIM+ DIM- + + - - “DO NOT connect "DIM- to Vo-" Additive PWM signal Vo+ Vo- DIM+ DIM- + + - - “DO NOT connect "DIM- to Vo-" Additive Resistance 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Output current (%) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Output current (%) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Output current (%) Dimming input: Additive voltage Duty cycle of additive 10V PWM signal dimming input Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity forsynchronized dimmingoperation) Dimming input: Additive resistance DIM+(Blue) DIM-(White) SJOW 17AWG*2C +V(Red) -V(Black) AC/L(Brown) AC/N(Blue) PE (Green/Yellow) SJOW 17AWGx3C2 &H05RN-F 1.0mm UL2517 22AWG*2C

100W Constant Power Mode LED Driver XBG-100 series File Name:XBG-100-SPEC 2020-01-02 -40 -30 0 10 30 50 70 85 100 OUTPUT LOAD vs TEMPERATURE STATIC CHARACTERISTIC Tcase ( )℃ LOAD (%) (HORIZONTAL) AMBIENT TEMPERATURE,Ta ( )℃ LOAD (%) (HORIZONTAL) PF LOAD POWER FACTOR (PF) CHARACTERISTIC EFFICIENCY vs LOAD XBG-100 series possess superior working efficiency that up to 92% can be reached in field applications. EFFICIENCY(%) LOAD ※Tcase at 65 ℃ TOTAL HARMONIC DISTORTION (THD) THD ※ Model, Tcase at 651750mA ℃ Constant Current Mode -40 -30 -10 0 15 30 40 60 70 100 ※ Model, Tcase at 651750mA ℃ 230VAC Input only 230VAC Input only INPUT VOLTAGE (V) 60Hz LOAD (%) 90 100 125 135 145 155 165 175 180 200 230 305 100 100VAC 230VAC LOAD (100W) 0.75 0.8 0.85 0.9 0.95 50% 60% 70% 80% 90% 100% 277V 230V 115V 50% 60% 70% 80% 90% 100% 277V 230V 115V 10% 12% 50% 60% 70% 80% 90% 100% 277V 230V 115V

25 30 35 40 45 50 55 60 65 65 70 75 80 85 100W Constant Power Mode LED Driver XBG -100 seri es File Name:XBG-100-SPEC 2020-01-02 LIFETIME Tcase( )℃ LIFETIME(Kh) INSTALLATIONS Caution Hanger High Bay LightChain ‧ Please inspect the appearance of the driver if the package is damaged. There should not be any cracks. ‧ Please do not drop or bump the driver. ‧ All screws including the suspension screw should be paired with a spring washer and locked tight. ‧ The entire luminaire, including the driver, should be limited to 10Kg or less. ‧ The luminaire should be cautiously protected from damage due to shock throughout packaging and transportation. ‧ Please thoroughly follow the preceding cautionary notes to prevent the luminaire from falling, leading to injuries.

100W Constant Power Mode LED Driver XBG -100 seri es File Name:XBG-100-SPEC 2020-01-02 MECHANICAL SPECIFICATION Case No.280 Unit:mm ※ A-Type(AC Cable with fixed cable) ※ AB-Type(AC Cable with fixed cable) ‧Ta: Ambient Temperature measured point ‧ : Max. Case Temperature.(case temperature measured point)tc ψ126.6 4- 6.0ψ SJOW 17AWG*2C +V(Red) -V(Black) 200±20 34.6 39.6 300±20 AC/L(Brown) AC/N(Blue) PE (Green/Yellow) SJOW 17AWGx3C 2 &H05RN-F 3x1.0mm Ta 45°150 113 113 tc 20 14.5 SJOW 17AWG*2C +V(Red) -V(Black) 200±20 34.6 39.6 350±20 DIM+(Blue) DIM-(White) UL2517 22AWG*2C 300±20 AC/L(Brown) AC/N(Blue) PE (Green/Yellow) SJOW 17AWGx3C 2 &H05RN-F 3x1.0mm Ta 45°150 113 113 ψ126.6 4- 6.0ψ tc 20 14.5

100W Constant Power Mode LED Driver XBG -100 seri es File Name:XBG-100-SPEC 2020-01-02 INSTALLATION MANUAL ‧Ta: Ambient Temperature measured point ‧ : Max. Case Temperature.(case temperature measured point)tc Terminal Pin No. Assignment(CHOGORI 22003515-01) Pin No. Assignment AC/L PE AC/N Drawing ※ AB-C-Type(AC cable with connector) ※ A-C-Type(AC cable with connector) AC input cable option Item Order part NO. 1FF5XBG-160-IP1 1FF5XBG-160-IP3 1FF5XBG-160-IP2 1000 or 2000 or 3000 mm CHOGORI 22003211-01 H05RN-F 3C*0.75mm 34.6 39.6 113 113 SJOW 17AWG*2C +V(Red) -V(Black) 200±20 Ta 45°150 ψ126.6 4- 6.0ψ M10*P1.5-18h tc 20 14.5 34.6 39.6 113 113 SJOW 17AWG*2C +V(Red) -V(Black) 200±20 350±20 DIM+(Blue) UL2517 22AWG*2CDIM-(White) Ta 45°150 ψ126.6 4- 6.0ψ M10*P1.5-18h tc 20 14.5