X9C104

ISL96017_12 INTERSIL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

(Digitally Controlled Potentiometers) Volatile/Non-Volatile Single/Dual/Quad

2 | www.intersil.com/DCPs-DCCs + + = Resistor Ladder Resolution: 4-bit to 10-bit RTOTAL: 1kΩ to 100kΩ DCP TSSOP, SC-70, SOT-23, µTQFN I 2C, SPI, Up/Down, Pushbutton Register Store Non-volatile: E2PROM Volatile: RAM Digital Control Advantage DCP Mechanical Potentiometer Reliability Not susceptible to mechanical vibration & higher tolerance to environmental factors. Have moving parts, so can be more sensitive to vibration, humidity, etc. Power-up DCPs with EEPROM will store setting until user changes the value in memory (~100k to 1M times). If glue is used to prevent wiper movement, the device setting cannot be changed. Control Digital control - reduced manufacturing costs and enables factory automation Manual control – increases setup time and accuracy is reliant on technician Size Typically Smaller Typically Larger Advantage DCP DAC Flexibility of Output Terminals 3 terminals allow use as either voltage divider or variable resistor. Also allows user to change voltage at terminal ends. Terminals are usually fixed rail to rail. No flexibility to change between I OUT and VOUT. Power-up Output Setting Non-volatile DCPs have EEPROM where a user can store power-up settings. Output typically has default settings like Volatile DCPs. Digital Interface Multiple Choices: I C, SPI, U/D, Push-button Primarily I C or SPI ADVANtAgeS of DCP vs. DeViCeS with SimilAr fuNCtioNS WhAT IS A DCP? Digitally Controlled Potentiometers are integrated circuits incorporating a resistor ladder with its associated registers, non- volatile or volatile memory, and a digital interface providing direct communication between a host and both the resistor ladder and memory. register Store DCP wiper position is stored in a register. When power is reset, a volatile DCP typically sets the wiper position to midscale or zero-scale at power-up. When the power is cycled for a nonvolatile DCP, the last value stored in the EEPROM register is recalled, which loads the initial wiper value during power-up. Digital Control Digital control allows the user to select each switch in a “make before break” mode, transferring the potential to the wiper. DIGITAL POTENTIOMETERS iNterSil SeleCtioN guiDe DCP overview DCP Structure DCP = Digitally Controlled Potentiometer tap = Switch position on resistor string rtotAl = Total Resistance wiper (Vw/rw) = DCP output node DCP oVerView ACCESS CONTROL REGISTER (ACR) VOL SHDN WIP 0 0 0 0 0 VH /RH VL /RL VW/RW Only one closes at a time RTOTAL TAP 1 TAP 2 TAP 127 TAP 128 resistor ladder The resistor array is comprised of individual resistors connected in series. There are electronic switches (taps) at each resistor junction, which have a common output node called a wiper (VW/RW). Each physical end of the array is described as a terminal and referred to as VH/ RH and VL/RL, and the resistance between the terminals is referred to as R TOTAL. DATA 81CLOCK

www.intersil.com/DCPs-DCCs | 3 Vref (with trim) i.e. ISL21009 Trim System Errors Trimmable Voltage Reference VIN VW VL VH VO Temp Trim GND VOUT Controls Center Frequency Tunable Bandpass Filter IGMF Model VS VO Controls Cutoff Frequency Controls Passband Gain Low Pass Filter Programmable Filter and Gain Block R C VS VO Non-Inverting Filter Adjust Offset, Gain, DC Signal Control Programmable Inverting Amplifier GND -5V VCC VL VO VH VW R1 R2 Programmable Voltage Regulator 100kΩ VO (Reg) VIN (UNREG) [≥(VO + IV)] R (10kΩ) Voltage Regulator ERROR SHUTDOWN Controls Output Voltage DIGITAL POTENTIOMETERS iNterSil SeleCtioN guiDe DCP APPliCAtioNS DigitAlly ProgrAmmAble

• Voltage Amplifier
• Filter
• Voltage Reference
• Voltage Regulator DCPs ENAbLE DIGITALLy CONTROLLED ANALOG SIGNAL PROCESSING DCPs allow for digital flexibility in an analog circuit. DCPs provide a link between the digital and analog domains in the system, allowing repeatable control and configuration of analog circuitry. This approach is typically more power-efficient than computationally intensive digital signal processing. For more information, please see AN133. DCP

Applications

4 | www.intersil.com/DCPs-DCCs DIGITAL POTENTIOMETERS iNterSil SeleCtioN guiDe feAtureD iNterSil DCPs true DigitAl rheoStAt Known accuracy allows for precise settings. Low cost: ISL23511/ISL23512 volatile DCPs also available See also: ISL95811, ISL22511/12, ISL223x3/4x4 1% 1% SCL SDA RREF POWER-UP, INTERFACE, RH RL RW GND VCC REF_A REF_B EEPROM AND CONTROL LOGIC Single, Non- Volatile iSl96017 SMALLEST DCP WITh 16kbITs ExTRA MEMORy 1st LOW VOLTAGE PRECISION DCP SMALLEST NON VOLATILE PUSh-bUTTON DCP FIRST 125°C NON-VOLATILE DCP ISL96017 — Tiny 3x3 TDFN Package ISL22317 — Typically >99% Accurate at Each Tap ISL22511/12 — 2.15x1.65mm µTQFN Package ISL22346 — Tiny Quad DCP in 4x4 TQFN Package Key feAtureS AND beNefitS

• Save space/cost by eliminating EEPROM chip
• Integrate additional intelligence Key feAtureS AND beNefitS
• Eliminates additional calibration
• Temperature drift reduction – mirrors the temperature coefficient of the external reference resistor Key feAtureS AND beNefitS
• Simple push-button interface - No software required
• Auto/manual store – ease of use
• Zero-compensated wiper resistance - minimizes error of use Key feAtureS AND beNefitS
• 128-tap, non-volatile, set & forget
• Save power with its shutdown feature
• Store multiple start-up values
• Set specific current and resistor values
• Adjust volume/contrast/backlight
• Additional user feature, i.e gain control
• Bias control
• Calibrate for extreme environments ISL96017 128-Tap DCP 16kbit E2PROM 2.90mm 2.15mm 1.00mm 0.55mm 2.80mm 1.65mm8 Ld TSOT 10 Ld µTQFN 56% Smaller 45% Shorter military temperature (-55 to +125°C) in 20 ld tSSoP Package 4x4mm tiny tQfN Package 1% tolerance Auto Store Set & forget! Single, Volatile iSl22511/12 Single, Non- Volatile iSl22317 Quad, Non- Volatile iSl22346 PACKAge AND temPerAture oPtioN 99% ACCurACy tiNy µtQfN PACKAge bACKlight CoNtrol DC-DC UP DOWN Gain Control Voltage or Current Control

www.intersil.com/DCPs-DCCs | 5 DIGITAL POTENTIOMETERS iNterSil SeleCtioN guiDe Single DCPs Device Number of taps memory type bus interface type resistance Options (kΩ) VCC range (V) terminal Voltage range (V) resistance taper Standby Current iSb (μA) Package Non-Volatile X9116 16 Non-Volatile 3-Wire (Up/Down) 10 2.7 to 5.5 0 to VCC Linear 1 8 Ld MSOP, 8 Ld SOIC ISL22512 16 Non-Volatile Push Button 10 2.7 to 5.5 0 to VCC Linear 0.6 10 Ld µTQFN X9511 32 Non-Volatile Push Button 10 4.5 to 5.5 -5.0 to +5.0 Linear 200 8 Ld PDIP, 8 Ld SOIC X9313 32 Non-Volatile 3-Wire (Up/Down) 1, 10, 50 3.0 to 5.5 -5.0 to +5.0 Linear 500 8 Ld MSOP, 8 Ld PDIP, 8 Ld SOIC X9314 32 Non-Volatile 3-Wire (Up/Down) 10 3.0 to 5.5 -5.0 to +5.0 Logarithmic 500 8 Ld MSOP, 8 Ld PDIP, 8 Ld SOIC X9315 32 Non-Volatile 3-Wire (Up/Down) 10, 50, 100 2.7 to 5.5 0 to VCC Linear 1 8 Ld MSOP, 8 Ld PDIP, 8 Ld SOIC X93154 32 Non-Volatile 3-Wire (Up/Down) 50 2.7 to 3.3 0 to VCC Linear 1 8 Ld DFN, 8 Ld MSOP X93155 32 Non-Volatile 3-Wire (Up/Down) 50 4.5 to 5.5 0 to VCC Linear 2 8 Ld MSOP X93156 32 Non-Volatile 3-Wire (Up/Down) 12.5, 50 2.7 to 5.5 0 to VCC Linear 1 8 Ld MSOP ISL22511 32 Non-Volatile Push Button 10, 50 2.7 to 5.5 0 to VCC Linear 0.6 8 Ld SOIC, 10 Ld µTQFN X9421 64 Non-Volatile SPI 2.5, 10 2.7 to 5.5 0 to VCC Linear 1 14 Ld TSSOP, 16 Ld SOIC, 18 Ld PDIP X9429 64 Non-Volatile 2-Wire 2.5, 10 2.7 to 5.5 0 to VCC Linear 5 14 Ld TSSOP, 16 Ld SOIC, 18 Ld PDIP X9317 100 Non-Volatile 3-Wire (Up/Down) 1, 10, 50, 100 2.7 to 5.5 0 to VCC Linear 1 8 Ld MSOP, 8 Ld PDIP, 8 Ld SOIC,

8 Ld TSSOP

X9318 100 Non-Volatile 3-Wire (Up/Down) 10 4.5 to 5.5 0 to +8 Linear 300 8 Ld PDIP, 8 Ld SOIC X9319 100 Non-Volatile 3-Wire (Up/Down) 10, 50 4.5 to 5.5 0 to +10 Linear 300 8 Ld PDIP, 8 Ld SOIC X9C102 100 Non-Volatile 3-Wire (Up/Down) 1 4.5 to 5.5 -5.0 to +5.0 Linear 750 8 Ld Other, 8 Ld PDIP, 8 Ld SOIC X9C103 100 Non-Volatile 3-Wire (Up/Down) 10 4.5 to 5.5 -5.0 to +5.0 Linear 750 8 Ld PDIP, 8 Ld SOIC X9C104 100 Non-Volatile 3-Wire (Up/Down) 100 4.5 to 5.5 -5.0 to +5.0 Linear 750 8 Ld PDIP, 8 Ld SOIC X9C303 100 Non-Volatile 3-Wire (Up/Down) 32 4.5 to 5.5 -5.0 to +5.0 Logarithmic 750 8 Ld PDIP, 8 Ld SOIC, 8 Ld TSSOP X9C503 100 Non-Volatile 3-Wire (Up/Down) 50 4.5 to 5.5 -5.0 to +5.0 Linear 750 8 Ld PDIP, 8 Ld SOIC ISL22316 128 Non-Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 5 10 Ld MSOP ISL22317 128 Non-Volatile I 2C 10, 50, 100 2.7 to 5.5 0 to VCC Linear 500 10 Ld TDFN ISL22319 128 Non-Volatile I C 10, 50 2.7 to 5.5 0 to VCC Linear 850 8 Ld MSOP ISL22416 128 Non-Volatile SPI 10, 50 2.7 to 5.5 0 to VCC Linear 5 10 Ld MSOP ISL22419 128 Non-Volatile SPI 10, 50 2.7 to 5.5 0 to VCC Linear 850 8 Ld MSOP ISL95310 128 Non-Volatile 3-Wire (Up/Down) 10, 50 2.7 to 5.5 0 to +13.2 Linear 2 10 Ld MSOP ISL95311 128 Non-Volatile I 2C 10, 50 2.7 to 5.5 0 to +13.2 Linear 2 10 Ld MSOP ISL95711 128 Non-Volatile I ISL96017 128 Non-Volatile I C 10, 50 3.0 to 3.6 0 to VCC Linear 10 8 Ld DFN X9271 256 Non-Volatile SPI 50, 100 2.7 to 5.5 0 to VCC Linear 5 14 Ld TSSOP X9279 256 Non-Volatile 2-Wire 50, 100 2.7 to 5.5 0 to VCC Linear 5 14 Ld TSSOP, 18 Ld PDIP ISL22313 256 Non-Volatile I ISL95810 256 Non-Volatile I C 10, 50 2.7 to 5.5 0 to VCC Linear 5 8 Ld DFN, 8 Ld MSOP ISL95811 256 Non-Volatile I C 10, 50 2.7 to 5.5 0 to VCC Linear 10 8 Ld DFN, 8 Ld MSOP X9110 1024 Non-Volatile SPI 100 2.7 to 5.5 -5.0 to +5.0 Linear 3 14 Ld TSSOP X9111 1024 Non-Volatile SPI 100 2.7 to 5.5 0 to VCC Linear 3 14 Ld TSSOP X9118 1024 Non-Volatile 2-Wire 100 2.7 to 5.5 -5.0 to +5.0 Linear 3 14 Ld TSSOP X9119 1024 Non-Volatile 2-Wire 100 2.7 to 5.5 0 to VCC Linear 3 14 Ld TSSOP Volatile ISL23512 16 Volatile Push Button 10 2.7 to 5.5 0 to VCC Linear 0.6 10 Ld µTQFN X9015 32 Volatile 3-Wire (Up/Down) 10, 50 2.7 to 5.5 0 to VCC Linear 1 8 Ld MSOP, 8 Ld PDIP, 8 Ld SOIC ISL23511 32 Volatile Push Button 10, 50 2.7 to 5.5 0 to VCC Linear 0.6 8 Ld SOIC, 10 Ld µTQFN ISL90460 32 Volatile 2-Pin (Up/Down) 10, 50, 100 2.7 to 5.5 0 to VCC Linear 1 5 Ld SC-70, 5 Ld SOT-23 ISL90461 32 Volatile 2-Pin (Up/Down) 10, 50, 100 2.7 to 5.5 0 to VCC Linear 1 6 Ld SC-70, 6 Ld SOT-23 ISL90462 32 Volatile 2-Pin (Up/Down) 10, 50, 100 2.7 to 5.5 0 to VCC Linear 1 6 Ld SC-70, 6 Ld SOT-23 ISL23711 128 Volatile I ISL90726 128 Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 0.5 6 Ld SC-70 ISL90727 128 Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 0.5 6 Ld SC-70 ISL90728 128 Volatile I C 10, 50 2.7 to 5.5 0 to VCC Linear 0.5 6 Ld SC-70 ISL90810 256 Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 5 8 Ld MSOP ISL23315 256 Volatile I C 10, 50, 100 1.7 to 5.5, VLOGIC 1.2 0 to VCC Linear <2.5 10 Ld MSOP, 10 µTQFN ISL23415 256 Volatile SPI 10, 50, 100 1.7 to 5.5, VLOGIC 1.2 0 to VCC Linear <2.5 10 Ld MSOP, 10 µTQFN lArgeSt SeleCtioN of DigitAl PoteNtiometerS

6 | www.intersil.com/DCPs-DCCs DIGITAL POTENTIOMETERS iNterSil SeleCtioN guiDe Dual DCPs Quad DCPs Device Number of taps memory type bus interface type resistance Options (kΩ) VCC range (V) terminal Voltage range (V) resistance taper Standby Current iSb (μA) Package Non-Volatile X93254 32 Non-Volatile 3-Wire (Up/ Down) 50 2.7 to 3.3 0 to VCC Linear 1 14 Ld TSSOP X93255 32 Non-Volatile 3-Wire (Up/ Down) 50 4.5 to 5.5 0 to VCC Linear 4 14 Ld TSSOP X93256 32 Non-Volatile 3-Wire (Up/ Down) 12.5, 50 2.7 to 5.5 0 to VCC Linear 1 14 Ld TSSOP X9221A 64 Non-Volatile 2-Wire 2, 10, 50 4.5 to 5.5 -3.0 to +5.0 Linear 500 20 Ld PDIP, 20 Ld SOIC X9410 64 Non-Volatile SPI 10 2.7 to 5.5 -5.5 to +5.5 Linear 1 24 Ld PDIP, 24 Ld SOIC, 24 Ld TSSOP ISL22326 128 Non-Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 5 14 Ld TSSOP ISL22329 128 Non-Volatile I C 10, 50 2.7 to 5.5 0 to VCC Linear 850 10 Ld MSOP ISL22426 128 Non-Volatile SPI 10, 50 2.7 to 5.5 0 to VCC Linear 5 14 Ld TSSOP ISL22429 128 Non-Volatile SPI 10, 50 2.7 to 5.5 0 to VCC Linear 850 10 Ld MSOP X9268 256 Non-Volatile 2-Wire 50, 100 2.7 to 5.5 -5.5 to +5.5 Linear 5 24 Ld SOIC, 24 Ld TSSOP X9269 256 Non-Volatile 2-Wire 50, 100 2.7 to 5.5 0 to VCC Linear 5 24 Ld SOIC, 24 Ld TSSOP X95820 256 Non-Volatile I C 10, 50 2.7 to 5.5 0 to VCC Linear 5 14 Ld TSSOP X9260 256 Non-Volatile SPI 50, 100 2.7 to 5.5 -5.5 to +5.5 Linear 5 24 Ld SOIC, 24 Ld TSSOP X9261 256 Non-Volatile SPI 50, 100 2.7 to 5.5 0 to VCC Linear 5 24 Ld SOIC, 24 Ld TSSOP ISL22323 256 Non-Volatile I 2C 10, 50, 100 2.25 to 5.5 -5.5 to +5.5 Linear 4 14 Ld TSSOP, 16 Ld QFN ISL22424 256 Non-Volatile SPI 10, 50, 100 2.25 to 5.5 -5.5 to +5.5 Linear 4 14 Ld TSSOP, 16 Ld QFN Volatile X9460 32 Volatile 2-Wire 32 2.7 to 5.5 -5.5 to +5.5 Logarithmic 3 14 Ld TSSOP ISL22102 32 Volatile Push button 32 2.7 to 5.5 0 to AVCC Logarithmic 395 14 Ld TSSOP, 20 Ld QFN Device Number of taps memory type bus interface type resistance Options (kΩ) VCC range (V) terminal Voltage range (V) resistance taper Standby Current iSb (μA) Package Non-Volatile X9241A 64 Non-Volatile 2-Wire 2, 10, 50 4.5 to 5.5 -3.0 to +5.0 Linear 500 20 Ld PDIP, 20 Ld SOIC, 20 Ld TSSOP X9409 64 Non-Volatile 2-Wire 2.5, 10 2.7 to 5.5 0 to VCC Linear 1 24 Ld SOIC, 24 Ld TSSOP X9401 64 Non-Volatile SPI 2.5, 10 2.7 to 5.5 0 to VCC Linear 1 24 Ld PDIP, 24 Ld SOIC, 24 Ld TSSOP ISL22346 128 Non-Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 5 20 Ld TSSOP ISL22349 128 Non-Volatile I C 10, 50 2.7 to 5.5 0 to VCC Linear 2400 14 Ld TSSOP ISL22446 128 Non-Volatile SPI 10, 50 2.7 to 5.5 0 to VCC Linear 5 20 Ld TSSOP ISL22449 128 Non-Volatile SPI 10, 50 2.7 to 5.5 0 to VCC Linear 2400 14 Ld TSSOP X9252 256 Non-Volatile 2-Wire, 3-Wire (Up/Down) 2, 10, 50, 100 2.7 to 5.5 0 to VCC Linear 100 24 Ld TSSOP X9258 256 Non-Volatile 2-Wire 50, 100 2.7 to 5.5 -5.5 to +5.5 Linear 5 24 Ld SOIC, 24 Ld TSSOP X9259 256 Non-Volatile 2-Wire 50, 100 2.7 to 5.5 0 to VCC Linear 5 24 Ld SOIC, 24 Ld TSSOP X95840 256 Non-Volatile I2C 10, 50 2.7 to 5.5 0 to VCC Linear 5 20 Ld TSSOP X9250 256 Non-Volatile SPI 50, 100 2.7 to 5.5 -5.5 to +5.5 Linear 5 24 Ld SOIC, 24 Ld TSSOP X9251 256 Non-Volatile SPI 50, 100 2.7 to 5.5 0 to VCC Linear 3 24 Ld PDIP, 24 Ld SOIC, 24 Ld TSSOP ISL22343 256 Non-Volatile I C 10, 50, 100 2.25 to 5.5 -5.5 to +5.5 Linear 4 20 Ld QFN, 20 Ld TSSOP ISL22444 256 Non-Volatile SPI 10, 50, 100 2.25 to 5.5 -5.5 to +5.5 Linear 4 20 Ld QFN, 20 Ld TSSOP Volatile ISL90840 256 Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 5 20 Ld TSSOP ISL90841 256 Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 5 14 Ld TSSOP ISL90842 256 Volatile I 2C 10, 50 2.7 to 5.5 0 to VCC Linear 5 14 Ld TSSOP ISL90843 256 Volatile I C 10, 50 2.7 to 5.5 0 to VCC Linear 2800 10 Ld DFN, 10 Ld MSOP lArgeSt SeleCtioN of DigitAl PoteNtiometerS

www.intersil.com/DCPs-DCCs | 7 INTERSIL DCP QUICk REFERENCE Volatile (No EEPROM Memory) Non-Volatile (EEPROM Memory) Special Function DCPs Single 16-tap (4-bits) ISL23512 - 10kΩ, Push Button Single 32-tap (5-bits) X9015 - 10kΩ / 50kΩ / 100kΩ, Up-Down ISL23511 - 10kΩ / 50kΩ, Push Button ISL90460 - 10kΩ / 50kΩ / 100kΩ, Up-Down, Rheostat ISL90461 - 10kΩ / 50kΩ / 100kΩ, Up-Down, 2-Terminal ISL90462 - 10kΩ / 50kΩ / 100kΩ, Up-Down, 2-Terminal Single 128-tap (7-bits) ISL90726 - 10kΩ / 50kΩ, I 2C, 2-Terminal ISL90727 - 10kΩ / 50kΩ, I2 C, 2-Terminal ISL90728 - 10kΩ / 50kΩ, I C, 2-Terminal ISL23711 - 10kΩ / 50kΩ, I2 C ISL23710 - 10kΩ / 50kΩ, Up-Down Single 256-tap (8-bits) ISL90810 - 10kΩ / 50kΩ, I C ISL23315 - 10kΩ / 50kΩ / 100kΩ, I2 C,Low Voltage ISL23415 - 10kΩ / 50kΩ / 100kΩ, SPI,Low Voltage D D Quad 256-tap (8-bits) ISL90840 - 10kΩ / 50kΩ, I2C ISL90841 - 10kΩ / 50kΩ, I2 C, 2-Terminal ISL90842 - 10kΩ / 50kΩ, I C, 2-Terminal ISL90843 - 10kΩ / 50kΩ, I2C, Wiper Only Dual 32-tap (5-bits) X9460 - 32kΩ, Log Taper, 2-Wire ISL22102 - 32kΩ, Log Taper, Audio Detect, Push Button D Single 16-Tap (4-Bits) X9116 - 10kΩ, Up-Down ISL22512 - 10kΩ, Push Button Single 32-tap (5-bits) X9313 - 1kΩ / 10kΩ / 50kΩ, Up-Down X9314 - 10kΩ, Log Taper, Up-Down X9315 - 10kΩ / 50kΩ / 100kΩ, Up-Down X93154 - 50kΩ, Up-Down, 2-Terminal X93155 - 50kΩ, Up-Down, 2-Terminal X93156 - 12.5kΩ / 50kΩ, Up-Down X9511 - 10kΩ, Push Button ISL22511 - 10kΩ / 50kΩ, Push Button Single 64-tap (6-bits) X9429 - 2.5kΩ / 10kΩ, 2-Wire Single 100-tap (~6.65-bits) X9317 - 1kΩ / 10kΩ / 50kΩ / 100kΩ, Up-Down X9318 - 10kΩ, Up-Down X9319 - 10kΩ / 50kΩ / 100kΩ, Up-Down X9C102 - 1kΩ, Up-Down X9C103 - 10kΩ, Up-Down X9C104 - 100kΩ, Up-Down X9C503 - 50kΩ, Up-Down X9C303 - 32kΩ, Log Taper, Up-Down Single 128-tap (7-bits) ISL22316 - 10kΩ / 50kΩ, I ISL22317 - 10kΩ / 50kΩ / 100kΩ, 1% Tolerance, I2C ISL22319 - 10kΩ / 50kΩ, I 2C, Wiper Only ISL95311 - 10kΩ / 50kΩ, I C ISL95711 - 10kΩ / 50kΩ, I C ISL96017 - 10kΩ / 50kΩ, I 2C (16kbits extra EEPROM) ISL22416 - 10kΩ / 50kΩ, SPI ISL22419 - 10kΩ / 50kΩ, SPI, Wiper Only ISL95310 - 10kΩ / 50kΩ, Up-Down ISL95710 - 10kΩ / 50kΩ, Up-Down Single 256-tap (8-bits) ISL95810 - 10kΩ / 50kΩ, I ISL95811 - 10kΩ / 50kΩ, I C ISL22313 - 10kΩ / 50kΩ / 100kΩ, I C ISL22414 - 10kΩ / 50kΩ / 100kΩ, SPI Single 1024-tap (10-bits) X9110 - 100kΩ, SPI X9111 - 100kΩ, SPI X9118 - 100kΩ, 2-Wire X9119 - 100kΩ, 2-Wire D D D E E D D D D D E D E D D D D D Dual 32-tap (5-bits) X93254 - 50kΩ, Up-Down, 2-Terminal X93255 - 50kΩ, Up-Down, 2-Terminal X93256 - 50kΩ, Up-Down Dual 64-tap (6-bits) X9410 - 10kΩ, SPI X9221A - 2kΩ / 10kΩ / 50kΩ, 2-Wire X9418 - 2.5kΩ / 10kΩ, 2-Wire Dual 128-tap (7-bits) ISL22326 - 10kΩ / 50kΩ, I C ISL22329 - 10kΩ / 50kΩ, I2 C, Wiper Only ISL22426 - 10kΩ / 50kΩ, SPI ISL22429 - 10kΩ / 50kΩ, SPI, Wiper Only Dual 256-tap (8-bits) X95820 - 10kΩ / 50kΩ, I C X9260 - 50kΩ / 100kΩ, SPI X9261 - 50kΩ / 100kΩ, SPI X9268 - 50kΩ / 100kΩ, 2-Wire ISL22323 - 10kΩ / 50kΩ / 100kΩ, I ISL22424 - 10kΩ / 50kΩ / 100kΩ, SPI D D D D D D D Quad 64-tap (6-bits) X9400 - 2.5kΩ / 10kΩ, SPI X9401 - 10kΩ, SPI X9241A - 2kΩ / 10kΩ / 50kΩ, 2-Wire X9408 - 2.5kΩ / 10kΩ, 2-Wire X9409 - 2.5kΩ / 10kΩ, 2-Wire Quad 128-tap (7-bits) ISL22346 - 10kΩ / 50kΩ, I C ISL22349 - 10kΩ / 50kΩ, I 2C, Wiper Only ISL22446 - 10kΩ / 50kΩ, SPI ISL22449 - 10kΩ / 50kΩ, SPI, Wiper Only Quad 256-tap (8-bits) X95840 - 10kΩ / 50kΩ, I C X9250 - 50kΩ / 100kΩ, SPI X9251 - 50kΩ / 100kΩ, SPI X9252 - 2kΩ / 10kΩ / 50kΩ / 100kΩ, 2-Wire X9258 - 50kΩ / 100kΩ, 2-Wire X9259 - 50kΩ / 100kΩ, 2-Wire ISL22343 - 10kΩ / 50kΩ / 100kΩ, I C ISL22444 - 10kΩ / 50kΩ / 100kΩ, SPI D D D D D D D Dual Audio DCP - integrated output buffer Amps and Audio Detect ISL22102 - 32kΩ, Log Taper, Push Button, 0 to -72dB Dynamic Range Low Voltage 1% Tolerant Precision DCP & Low Temperature Coefficient ISL22317 - 10kΩ / 50kΩ / 100kΩ, I Programmable Voltage reference X60250 - Micro-power, 8-bit Adjustable, 0 to 1.25V ISL21400 - Programmable Gain and Temperature Slope Sensor Conditioners with ADC, e 2Prom look-up tables, and DACs X96010 - Dual, 2-Wire X96011 - Single with Temperature Sensor, 2-Wire X96012 - Dual with Temperature Sensor, 2-Wire Single 128-tap DCP with 16kbits general Purpose e 2Prom ISL96017 - 10kΩ / 50kΩ, I2C tft/lCD Programmable VCom Calibrator (128 Step) ISL45041 - I C ISL45042 - Up-Down Positive and negative terminal voltageDExtended positive terminal voltageE

LC-058.3 Printed in USA 12/10 © 2010 Intersil Americas Inc. All Rights Reserved. The following are trademarks or registered trademarks of Intersil Americas Inc.: Intersil, Intersil logo, “i” and Design. All other trademarks are the property of the respective trademark owners. North AmeriCA weSt CoASt intersil headquarters 1001 murphy ranch road milpitas, CA 95035 (tel) 408-432-8888 (fAX) 408-434-5351 1-888-iNterSil 1-888-468-3774 eASt CoASt 1650 robert J Conlan blvd Ne Palm bay, fl 32905 (tel) 321-724-7000 (fAX) 321-729-7320 1-888-iNterSil 1-888-468-3774 euroPe oskar-messter-Str. 29 D-85737 ismaning germany ASiA PACifiC Suite 501, 5/f, ocean Centre, harbour City, tsimshatsui, Kowloon hong Kong (tel) +852-2709-7600 (fAX) +852-2730-1433 JAPAN 6f, mita Nitto Daibiru 3-11-36, mita, minato-ku tokyo, 108-0073 Japan Intersil Main Offices Visit www.intersil.com for a complete list of sales representatives and distributors.