S1D13524 EPSON | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
X98A-C-001-01 EPSON Confidential 1 GRAPHICS S1D13524 S1D13524 Color EPD Controller April 9 2010 EPSON's S1D13524 controller brings color and large panel B/W support to EPD. The S1D13524 is designed with the latest EINK materials in mind, and supports the latest advances in gate and source driver technology. The S1D13524 is the perfect solution to high resolution, high frame rate designs. The built-in color processor is designed to minimize host processing overhead. It configures easily for each customers unique requirements. The color engine can be configured to match many CFA configurations with build-in dithering to further optimize the Color EPD image with low host overhead. The S1D13524 controller connects to external memory and power management logic; separate flash and thermal sensors are optional. As with all of EPSON EPD controllers, the S1D13524 allows multi-regional and concurrent display updates. The S1D13524 includes support for Rotation, Transparency, Instant On functions. The Advanced Sequencer Engine, Power Management, I2C Thermal Sensor, and Serial Flash support make a variety of implementations possible. The S1D13524 is the ideal choice for color EPD or large, high frame rate B/W designs. Features
- Targeted for high resolution, high frame rate Color
- Built-in color processor
- Flexible CFA configurations
- Built-in dither function integrated into the color engine.
- High resolution color up to 2560x2048 @ 85Hz
- Supports 8000x8000 resolutions at lower frame rates
- Multi-Regional updates for smooth drawing
- Rotation support for Host Writes
- 16-bit indirect, TFT or Serial Indirect Host Support
- I2C Thermal Sensor provides temperature support for automatic temperature compensation.
- Programmable Power Management for panel power saving
- Supports third party PMIC’s
- Support for External 16/32-bit LP-DDR and SDR Memory
- SPI master supporting 1 slave devices
- Advanced Sequencer Engine w/ ALU
- Auto boot display allow instant on without OS delay
- Internal Programmable PLL
- Single MHz Clock Input
- Software Power Save Mode
- General Purpose IO Pins available
- Package: TFBGA 241-pin (0.65mm ball pitch) System Block Diagram Host S1D13524 Power Management Serial Flash Thermal Sensor Optional Driver Interface Panel ID Read SPI/I2C 16-Bit Host/Serial Host 16-Bit TFT Interface SPI I2C
X98A-C-001-01 EPSON Confidential 2 GRAPHICS S1D13524 Description Display Support
- Targeted for next generation E-Ink Active Matrix Panels
- Compatible latest PVI and LGD modules
- Color: 2560x2048 @ 85Hz
- B/W: 3200x2560 @ 50Hz
- Max resolution over 8000x8000
- Up to 4-bit grayscale waveforms (16 grey-shades)
- Panel Border Support Color
- Programmable built-in color processor
- CFA configuration is programmable
- Operates at TFT or pixel resolutions
- Built in dither function
- Supports split mask CFA configurations Memory
- 16 / 32 bit external DDR or SDR
- Host write rotation: 90°, 180°, or 270°
- Host Write data input can be packed as 8bpp/16bpp (color) or 4bpp (Grey scale) for high- speed transfer
- Image data can be loaded to the image buffer while display updates are in progress Host Support
- 16 bit (RGB565) streaming TFT input
- Indirect Intel 80 16- bit or Serial Host
- Simplified command style access
- DMA compatible memory bus style host interface
- Advanced Sequencer Engine w/ALU performs pre-programmed series of commands from Host Serial Flash Memory Waveform Read Support
- Optional SPI Flash memory for auto boot display support and customizable boot screen
- High Speed SPI Mode Power Management and Thermal Sensor Support
- Supports discrete power management solutions
- Supports integrated third party PMIC’s
- Generic I2C device support to support LM75 digital temperature sensor and compatible devices Clock Source
- Internal Programmable PLL
- Single MHz clock input (CLKI/Crystal) Miscellaneous
- SPI master supporting 2 slave devices (i.e. Serial Flash, Panel ID retrieval, etc.)
- Software Power Save Modes
- Low and ultra-low power modes
- General Purpose Input / Output pins
- Each GPIO pin can be configured for edge detect interrupt
- Package:
- TFBGA 241-pin (11mm x 11mm, 0.65mm pitch)
- Core Voltage: 1.5V
- IO Voltage: 1.65V – 3.6V For technical and ordering information for the S1D13524 EPD Controller, contact your EPSON sales representative. Korea Seiko Epson Corp. Korea Office 50F, LKI 63 Bldg.
60 Yoido-dong, Youngdeungpo-Ku,
Seoul, 150-763, Korea China Epson (China) Co., Ltd. 7F, Jinbao Bldg. No. 89 Jinbao St. Dongcheng District Beijing 100005, China Tel: +86-10-8522-1199 Fax: +86-10-8522-1125 Epson semiconductor website http://www.epson.jp/device/semicon_e/ © SEIKO EPSON CORPORATION 2010. All rights reserved. Information in this document is subject to change without notice. You may download and use this document, but only for your own use in evaluating Seiko Epson/EPSON products. You may not modify the document. Epson Research and Development, Inc. disclaims any representation that the contents of this document are accurate or current. The Programs/Technologies described in this document may contain material protected under U.S. and/or International Patent laws. EPSON is a registered trademark of Seiko Epson Corporation. All other trademarks are the property of their respective owners. Singapore Epson Singapore Pte., Ltd.
1 HarbourFront Place
#03-02 HarbourFront Tower One Singapore 098633 Tel: +65-6586-5500 Fax: +65-6271-3182 Europe Epson Europe Electronics GmbH Riesstrasse 15
80992 Munich, Germany
Fax: +49-89-14005-110 Hong Kong Epson Hong Kong Ltd. 20/F, Harbour Centre
25 Harbour Road
Wanchai, Hong Kong Tel: +852-2585-4600 Fax: +852-2827-4346 Taiwan Epson Taiwan Technology & Trading Ltd. 14F, No. 7 Song Ren Road Taipei 110, Taiwan Tel: +886-2-8786-6688 Fax: +886-2-8786-6660 North America Epson Electronics America, Inc.
2580 Orchard Parkway
San Jose, CA 95131, USA Tel: +1-800-228-3964 Fax: +1-408-922-0238 Japan Seiko Epson Corporation IC International Sales Group 421-8, Hino, Hino-shi Tokyo 191-8501, Japan Tel: +81-42-587-5814 Fax: +81-42-587-5117