X5R_V01 AVX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

PART NUMBER (SEE PAGE 4 FOR COMPLETE PART NUMBER EXPLANATION) TYPICAL ELECTRICAL CHARACTERISTICS 1210 4 D M A 2 AT107 Size (L” x W”) 0101** 0201 0402 0603 0805 1206 1210 1812 Dielectric D = X5R Capacitance Tolerance K = ±10% M = ± 20% Failure Rate A = N/A Packaging 2 = 7” Reel 4 = 13” Reel Special Code A = Std. Terminations T = Plated Ni and Sn Capacitance Code (In pF) 2 Sig. Digits + Number of Zeros Voltage 4 = 4V 6 = 6.3V Z = 10V Y = 16V 3 = 25V D = 35V 5 = 50V 1 = 100V NOTE: Contact factory for availability of Tolerance Options for Specific Part Numbers. Contact factory for non-specified capacitance values. GENERAL DESCRIPTION

  • General Purpose Dielectric for Ceramic Capacitors
  • EIA Class II Dielectric
  • Temperature variation of capacitance is within ±15% from -55°C to +85°C
  • Well suited for decoupling and filtering applications
  • Available in High Capacitance values (up to 100μF) **EIA 01005 -10 -15 -20 -60 -40 -20 0 +20 +40 +60 +80 10,000 1,000 100 0 100 12080 6040 20 % Capacitance Temperature °C Insulation Resistance (Ohm-Farads) Insulation Resistance vs Temperature Temperature °C 121720 X5R Dielectric – surface mount ceramic capacitor products – The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

Specifications and Test Methods Parameter/Test X5R Specification Limits Measuring Conditions Operating Temperature Range -55ºC to +85ºC Temperature Cycle Chamber Capacitance Within specified tolerance Freq.: 1.0 kHz ± 10% Voltage: 1.0Vrms ± .2V For Cap > 10 µF, 0.5Vrms @ 120HzDissipation Factor ≤ 2.5% for ≥ 50V DC rating ≤ 12.5% for 25V, 35V DC rating ≤ 12.5% Max. for 16V DC rating and lower Contact Factory for DF by PN Insulation Resistance 10,000MΩ or 500MΩ - µF, whichever is less Charge device with rated voltage for 120 ± 5 secs @ room temp/humidity Dielectric Strength No breakdown or visual defects Charge device with 250% of rated voltage for 1-5 seconds, w/charge and discharge current limited to 50 mA (max) Resistance to Flexure Stresses Appearance No defects Deflection: 2mm Test Time: 30 seconds Capacitance Variation ≤ ±12% Dissipation Factor Meets Initial Values (As Above) Insulation Resistance ≥ Initial Value x 0.3 Solderability ≥ 95% of each terminal should be covered with fresh solder Dip device in eutectic solder at 230 ± 5ºC for 5.0 ± 0.5 seconds Resistance to Solder Heat Appearance No defects, <25% leaching of either end terminal Dip device in eutectic solder at 260ºC for 60seconds. Store at room temperature for 24 ± 2hours before measuring electrical properties. Capacitance Variation ≤ ±7.5% Dissipation Factor Meets Initial Values (As Above) Insulation Resistance Meets Initial Values (As Above) Dielectric Strength Meets Initial Values (As Above) Thermal Shock Appearance No visual defects Step 1: -55ºC ± 2º 30 ± 3 minutes Capacitance Variation ≤ ±7.5% Step 2: Room Temp ≤ 3 minutes Dissipation Factor Meets Initial Values (As Above) Step 3: +85ºC ± 2º 30 ± 3 minutes Insulation Resistance Meets Initial Values (As Above) Step 4: Room Temp ≤ 3 minutes Dielectric Strength Meets Initial Values (As Above) Repeat for 5 cycles and measure after 24 ± 2 hours at room temperature Load Life Appearance No visual defects Charge device with 1.5X rated voltage in test chamber set at 85ºC ± 2ºC for 1000 hours (+48, -0). Note: Contact factory for *optional specification part numbers that are tested at < 1.5X rated voltage. Remove from test chamber and stabilize at room temperature for 24 ± 2 hours Capacitance Variation ≤ ±12.5% Dissipation Factor ≤ Initial Value x 2.0 (See Above) Insulation Resistance ≥ Initial Value x 0.3 (See Above) Dielectric Strength Meets Initial Values (As Above) Load Humidity Appearance No visual defects Store in a test chamber set at 85ºC ± 2ºC/ 85% ± 5% relative humidity for 1000 hours (+48, -0) with rated voltage applied. Remove from chamber and stabilize at room temperature and humidity for 24 ± 2 hours before measuring. Capacitance Variation ≤ ±12.5% Dissipation Factor ≤ Initial Value x 2.0 (See Above) Insulation Resistance ≥ Initial Value x 0.3 (See Above) Dielectric Strength Meets Initial Values (As Above) 042418 – surface mount ceramic capacitor products – The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

PREFERRED SIZES ARE SHADED Case Size 0101* 0201 0402 0603 0805 Soldering Reflow Only Reflow Only Reflow/Wave Reflow/Wfeve Reflow/Wfeve Packaging Paper/Embossed All Paper All Paper All Paper Paper/Embossed (L) Length mm (in.) 0.40 ± 0.02 (0.016 ± 0.0008) 0.60 ± 0.09 (0.024 ± 0.004) 1.00 ± 0.20 (0.040 ± 0.008) 1.60 ± 0.20 (0.063 ± 0.008) 2.01 ± 0.20 (0.079 ± 0.008) W) Width mm (in.) 0.20 ± 0.02 (0.008 ± 0.0008) 0.30 ± 0.09 (0.011 ± 0.004) 0.50 ± 0.20 (0.020 ± 0.008) 0.80 ± 0.20 (0.031 ± 0.008) 1.25 ± 0.20 (0.049 ± 0.008) (t) Terminal mm (in.) 0.10 ± 0.04 (0.004 ± 0.0016) 0.15 ± 0.05 (0.006 ± 0.002) 0.25 ± 0.15 (0.010 ± 0.006) 0.35 ± 0.15 (0.014 ± 0.006) 0.50 ± 0.25 (0.020 ± 0.010) Cap (pF) 100 101 B A 150 151 B A 220 221 B A C 330 331 B A C 470 471 B A C 680 681 B A C 1000 102 B A A C 1500 152 B B A A C 2200 222 B B A A A C 3300 332 B B A A A C 4700 472 B B A A A C G 6800 682 B B A A A C G Cap (μF) 0.01 103 B B A A A C G G G 0.015 150 B C G G G 0.022 223 B A A A A C C G G G N 0.033 333 B C G G G N 0.047 473 B A A A A C C G G G N 0.068 689 B C G G N 0.1 104 B A A A A C C C C G G G N N N 0.15 154 G N N 0.22 224 B A A A C C C C C G G N N N 0.33 334 G G N 0.47 474 B A A C C C C C E G J N P P 0.68 684 G N 1.0 105 A A C C C C C C C G G G G J G G N N P P 1.5 155 2.2 225 C C C C C C C C G G J J J K K N N P P P 3.3 335 J J J J N N 4.7 475 C C E E E E J J J G K N P J N N P P 10 106 E E E K J K K K P P P P P 22 226 E G K K K P P P P P 47 476 K K P P P 100 107 Case Size 0101* 0201 0402 0603 0805 Letter A B C E G J K M N P Q X Y Z Max. Thickness 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.055) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER EMBOSSED PAPER and EMBOSSED available for 01005 NOTE: Contact factory for non-specified capacitance values *EIA 01005 120121 – surface mount ceramic capacitor products – The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.

PREFERRED SIZES ARE SHADED Case Size 1206 1210 1812 Soldering Reflow/Wave Reflow Only Reflow Only Packaging Paper/Embossed Paper/Embossed All Embossed (L) Length mm 3.20 ± 0.40 (0.126 ± 0.016) 3.20 ± 0.40 (0.126 ± 0.016) 4.50 ± 0.30 W) Width mm 1.60 ± 0.30 (0.063 ± 0.012) 2.50 ± 0.30 (0.098 ± 0.012) 3.20 ± 0.20 (t) Terminal mm 0.50 ± 0.25 (0.020 ± 0.010) 0.50 ± 0.25 (0.020 ± 0.010) 0.61 ± 0.36 Voltage: 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 Cap (pF) 100 101 150 151 220 221 330 331 470 471 680 681 1000 102 1500 152 2200 222 3300 332 4700 472 6800 682 Cap (μF) 0.01 103 0.015 150 0.022 223 0.033 333 0.047 473 0.068 689 0.1 104 0.15 154 0.22 224 0.33 334 0.47 474 Q Q X X 0.68 684 1.0 105 Q Q Q X X X 1.5 155 2.2 225 Q Q Q Q Q X Z Z 3.3 335 Q Q 4.7 475 X X X X X X X Z Z Z Z Z 10 106 X X X X X X X X X Z Z Z Z Z 22 226 X X X X X Z Z Z Z Z Z Z Z Z 47 476 X X X X Z Z Z Z Z 100 107 X X Z Z Voltage: 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 4 6.3 10 16 25 35 50 Case Size 1206 1210 1812 Letter A B C E G J K M N P Q X Y Z Max. Thickness 0.33 (0.013) 0.22 (0.009) 0.56 (0.022) 0.71 (0.028) 0.90 (0.035) 0.94 (0.037) 1.02 (0.040) 1.27 (0.050) 1.40 (0.055) 1.52 (0.060) 1.78 (0.070) 2.29 (0.090) 2.54 (0.100) 2.79 (0.110) PAPER EMBOSSED PAPER and EMBOSSED available for 01005 NOTE: Contact factory for non-specified capacitance values *EIA 01005 X5R Dielectric Capacitance Range 021020 – surface mount ceramic capacitor products – The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.kyocera-avx.com/disclaimer/ by reference and should be reviewed in full before placing any order.