X150P0754 TDK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Ultrasonic time of flight sensor with integrated driving unit Series/Type: X150P0754 Ordering code: B59150X0754P030 Date: 2021-02-17 Version: 1.2 TDK Electronics AG 2021. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without TDK Electronics' prior express consent is prohibited. Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the table and then change the color to "white". This ensures that the table disappears (invisible) for the customer PDF. Don't change formatting when entering or pasting text in the table and don't add any cell or line in and to it! Identification/Classification 1 (header 1 + top left header bar): Ultrasonic sensor module Identification/Classification 2 (header 2 + bottom left header bar): Ultrasonic time of flight sensor with integrated driving unit Ordering code: (top right header bar) B59150X0754P030 Series/Type: (top right header bar) X150P0754 Preliminary data (optional): Preliminary datasheet Department: PPD PTC PD Date: 2021-02-17 Version: 1.2 Prepared by: Hr. Mohrmann Release signed PD: Hr. Krenn Release signed QS: Modifications/Remarks: xxxx xxxx xxxx
Ultrasonic sensor module B59150X0754P030 Ultrasonic time of flight sensor wi th integrated driving unit X150P0754 Preliminary datasheet PPD PTC PD 2021-02-17 Please read Cautions and warnings and Page 2 of 5 Important notes at the end of this document. Piezo driven ultrasonic time of flight sensor module with integrated driving unit
Applications
Distance and level measurement in air Obstacle detection in air
Features
Digital 3 wire interface Compact, closed membrane ultrasonic sensor design Configurable by user Low minimal measurement distance Dust and splash water protected Dimensions Parameter Symbol Unit Typical
1 Front diameter D1 mm 10
2 Total diameter D2 mm 15
3 Total length L1 mm 13
4 Pot length L2 mm 9
5 Length of front cylinder L3 mm 3
Ultrasonic sensor module B59150X0754P030 Ultrasonic time of flight sensor with integrated driving unit X150P0754 Preliminary datasheet PPD PTC PD 2021-02-17 Please read Cautions and warnings and Page 3 of 5 Important notes at the end of this document. Electrical specification Parameter Symbol Unit Typical
1 Supply voltage V SUP V 12
2 Current consumption I mA 5.5
3 Power down mode I mA <1
4 Communication Interface proprietary bidirectional IO (3-wire),
point to point architecture
5 Connector Harwin M40-3010346
Parameter Symbol Unit Typical
1 Minimal measuring distance 1) D min cm 12
2 Maximal measuring distance 1) D max cm 200
3 Directivity 2) α ° +/-30
4 Operating frequency f kHz 75
1) evaluated based on test target: cylindrical pole, 75mm diameter, 1m height, standard conditions for temperature and humidity. 2) circular beam Overall system performance depends on mounting conditions. Handling Do not drop the component and use it in application Do not touch the 3 pin connector or PCB without ESD protection Display of ordering codes for TDK Electronics products The ordering code for one and the same product can be represented differently in data sheets, data books, other publications, on the company website, or in order-related documents such as shipping notes, order confirmations and product labels. The varying representations of the ordering codes are due to different processes employed and do not affect the specifications of the respective products . Detailed information can be found on the Internet under www.tdk-electronics.tdk.com/orderingcodes.
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suit ability of our products for certain areas of application . These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitabilit y of our products for a partic ular customer application. As a rule we are either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether a product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life- saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.tdk-electronics .tdk.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time . The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products . Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. 6. Unless otherwise agreed in individual contracts, all orders are subject to our General Terms and Conditions of Supply. 7. Our manufacturing sites serving the automo tive business apply the IATF 16949 standard. The IATF certifications confirm our compliance with requirements regarding the quality management system in the automotive industry. Referring to customer requirements and customer specific requirements (“CSR”) TDK always has and will continue to have the policy of respecting individual agreements. Even if IATF 16949 may appear to support the acceptance of unilateral requirements, we hereby like to emphasize that only requirements mutually agreed upon can and will be implemented in our Quality Management System. For clarification purposes we like to point out that obligations from IATF 16949 shall only become legally binding if individually agreed upon.
- The trade names EPCOS, CarXield, CeraCharge, CeraDiode, CeraLink, CeraPad, CeraPlas, CSMP, CTVS, DeltaCap, DigiSiMic, ExoCore, FilterCap, FormFit, LeaXield, MiniBlue, MiniCell, MKD, MKK, ModCap, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, PowerHap, PQSine, PQvar, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, ThermoFuse, WindCap, XieldCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.tdk-electronics.tdk.com/trademarks. Release 2020-06