DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
Page 1 of 8 ASC_WWxxX_V13 Jul - 2013 WW12X, WW08X, WW06X, WW04X Thick Film Low ohm chip resistors Size 1206, 0805, 0603, 0402 *Contents in this sheet are subject to change without prior notice.
Page 2 of 8 ASC_WWxxX_V13 Jul - 2013 FEATURE 1. High power rating and compact size 2. High reliability and stability 3. Reduced size of final equipment 4. RoHS compliant and Lead free products APPLICATION
- Power supply
- PDA
- Digital meter
- Computer
- Automotives
- Battery charger
- DC-DC power converter
DESCRIPTION
The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to nominated value within tolerance which controlled by laser trimming of this resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is Tin (lead free) alloy. Fig 1. Construction of Chip-R
Page 3 of 8 ASC_WWxxX_V13 Jul - 2013 QUICK REFERENCE DATA Item General Specification Series No. WW12X WW08X WW06X WW04X Size code 1206 ( 3216 ) 0805 ( 2012 ) 0603 ( 1608 ) 0402(1005) Resistance Tolerance ±5%, ±1% Resistance Range 0.102 Ω ~ 0.976 Ω 0.100 Ω ~ 0.976 Ω ≤ 500 ppm/ °C ≤ 600 ppm/ °C TCR (ppm/ °C) Rn < 0.50 Ω 0.50 Ω ≤ Rn < 1 Ω ≤ 500 ppm/ °C ≤ 400 ppm/ °C ≤ 500 ppm/ °C ≤ 300 ppm/ °C ≤ 300 ppm/ °C ≤ 600 ppm/ °C Max. dissipation at T amb =70 °C 1/4 W 1/8 W 1/10 W 1/16 W Max. Operation Voltage (DC or RMS) 200V 100V 50V Max. Overload voltage (DC or RMS) 400V 200V 100V Operation temperature -55 ~ +155’C Note : 1. This is the maximum voltage that may be continuously supplied to the resistor element, see “IEC publication 60115-8” 2. Max. Operation Voltage : So called RCWV (Rated Continuous Working Voltage) is determined by Value Resistance Power Rated RCWV ×= or Max. RCWV listed above, whichever is lower. MECHANICAL DATA Symbol WW12X WW08X WW06X WW04X
Page 4 of 8 ASC_WWxxX_V13 Jul - 2013 MARKING 4-digits marking for 1206, 0805 size Each resistor is marked with a four-digit code on the protective coating to designate the nominal resistance value. 3-digits marking for 0603 size Each resistor is marked with a three -digit code on the protective coating to designate the nominal resistance value. WW04X series has no marking on the product overcoat for both 5% & 1%. Marking code list.
Page 5 of 8 ASC_WWxxX_V13 Jul - 2013 FUNCTIONAL DESCRIPTION Product characterization Standard values of nominal resistance are taken from the E96 & E24 series for resistors with a tolerance of ±5% & ±1%. The values of the E24/E96 series are in accordance with “IEC publication 60063”. Derating curve The power that the resistor can dissipate depends on the operating temperature; see Fig.2 Figure 2 Maximum dissipation in percentage of rated power as a function of the ambient temperature MOUNTING Due to their rectangular shapes and small tolerances, Surface Mountable Resistors are suitable for handling by automatic placement systems. Chip placement can be on ceramic substrates and printed-circuit boards (PCBs). Electrical connection to the circuit is by individual soldering condition. The end terminations guarantee a reliable contact. SOLDERING CONDITION The robust construction of chip resistors allows them to be completely immersed in a solder bath of 260 °C for 10 seconds. Therefore, it is possible to mount Surface Mount Resistors on one side of a PCB and other discrete components on the reverse (mixed PCBs). Surface Mount Resistors are tested for solderability at 235 °C during 2 seconds. The test condition for no leaching is 260 °C for 30 seconds. Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 3. Fig 3. Infrared soldering profile
Page 6 of 8 ASC_WWxxX_V13 Jul - 2013 CATALOGUE NUMBERS The resistors have a catalogue number starting with . WW12 X R020 F T L Size code WW12 : 1206 WW08 : 0805 WW06 : 0603 WW04 : 0402 Type code X : Normal Resistance code E96 +E24: R is first digit followed by 3 significant digits. 0.020 Ω = R020 0.510 Ω = R510 0.025 Ω = R025 0.400 Ω = no marking Tolerance J : ±5% G : ±2% F : ±1% Packaging code T : 7” Reel taping Termination code L = Sn base (lead free) Tape packaging WW12,WW08, WW06 : 8mm width paper taping 5,000pcs per reel. WW04: 8mm width paper taping 10,000pcs per reel.
Page 7 of 8 ASC_WWxxX_V13 Jul - 2013 TEST AND REQUIREMENTS(JIS C 5201-1 : 1998) TEST PROCEDURE REQUIREMENT Temperature Coefficient of Resistance(T.C.R) Clause 4.8 Natural resistance change per change in degree centigrade. ( ) 12 1 12 10 ×− ttR RR (ppm/ °C) t 1 : 20° C+5° C-1° C R 1 : Resistance at reference temperature R 2 : Resistance at test temperature Refer to “QUICK REFERENCE DATA” Short time overload (S.T.O.L) Clause 4.13 Permanent resistance change after a 5second application of a voltage 2.5 times RCWV or the maximum overload voltage specified in the above list, whichever is less. ΔR/R max. ±(2%+0.005 Ω ) WW04X max ±(2%+0.010 Ω ) Resistance to soldering heat(R.S.H) Clause 4.18 Un-mounted chips completely immersed for 10 ±1 second in a SAC solder bath at 260 ℃±5ºC no visible damage Δ R/R max. ±(1% +0.005 Ω ) WW04X max ±(1%+0.010 Ω ) Solderability Clause 4.17 Un-mounted chips completely immersed for 2±0.5 second in a SAC solder bath at 235℃±5 ℃ good tinning (>95% covered) no visible damage Temperature cycling Clause 4.19 30 minutes at -55 °C ±3°C, 2~3 minutes at 20° C+5° C-1° C, 30 minutes at +155 °C ±3°C, 2~3 minutes at 20° C+5° C-1° C, total 5 continuous cycles no visible damage ΔR/R max. ±(1% +0.005 Ω ) WW04X max ±(1%+0.010 Ω ) Load life (endurance) Clause 4.25 1000 +48/-0 hours, loaded with RCWV or Vmax in chamber controller 70 ±2ºC, 1.5 hours on and 0.5 hours off ΔR/R max. ±(3% +0.005 Ω ) WW04X max ±(5%+0.010 Ω ) Load life in Humidity Clause 4.24 1000 +48/-0 hours, loaded with RCWV or Vmax in humidity chamber controller at 40 °C ±2°C and 90~95% relative humidity, 1.5hours on and 0.5 hours off ΔR/R max. ±(3% +0.005 Ω ) WW04X max ±(5%+0.010 Ω ) Bending strength Clause 4.33 Resistors mounted on a 90mm glass epoxy resin PCB(FR4); bending : 2 mm, once for 10 seconds ΔR/R max. ±(1% +0.005 Ω ) WW04X max ±(1%+0.010 Ω ) Adhesion Clause 4.32 Pressurizing force: 5N, Test time: 10 ±1sec. No remarkable damage or removal of the terminations Insulation Resistance Clause 4.6 Apply the maximum overload voltage (DC) for 1minute R ≧10G Ω Dielectric Withstand Voltage Clause 4.7 Apply the maximum overload voltage (AC) for 1 minute No breakdown or flashover
Page 8 of 8 ASC_WWxxX_V13 Jul - 2013 PACKAGING Paper Tape specifications (unit :mm) Series No. A B W F E WW12X 3.60 ±0.20 2.00 ±0.20 WW08X 2.40 ±0.20 1.65 ±0.20 WW06X 1.90 ±0.20 1.10 ±0.20 WW04X 1.20 ±0.10 0.70 ±0.10 Series No. P1 P0 Φ D T WW12X / WW08X Max. 1.0 WW06X 0.65 ±0.05 WW04X 2.00 ±0.10 4.00 ±0.10 1 . 0 0 . 050 . 1+ Φ 0.40 ±0.05 Reel dimensions Symbol A B C D