WRA-110 JDSU | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

COMMUNICATIONS MODULES & SUBSYSTEMS Key Features • Protocol and data-rate independent, including 10 Gbps/ OC-192 applications

  • Easily configurable as a booster or a pre/inline C-band amplifier
  • Four variants WRA-110, WRA-113, WRA-116, WRA-119 to match specific application requirements
  • Constant signal gain mode configurable to 13 dB (WRA-110) and to 26 dB (WRA-119)
  • Constant total output power mode configurable to 10 dBm (WRA-110) and to 19 dBm (WRA-119)
  • Low power consumption and noise figure The WaveReady WRA-1xx series are user-configurable, single-channel optical amplifiers that provide simple and economical C-band optical amplification for single-channel applications in a flexible, ready-to-use package. These erbium- doped fiber amplifiers (EDFAs) are network-ready and easily configured as a booster or as a pre/inline amplifier. The modules work by default in constant signal-gain mode, but they can be configured to constant total output-power mode. Its ease-of-use and performance make the WRA-1xx series the ideal solution for Access and Metro optical networks. Front-panel light emitting diodes (LEDs) indicate module status, while integrated electronics provide alarm and control functionality. Deployed with a WaveReady communications module (COM200), these units can be managed and configured remotely through TL1, SNMP , or by using the WaveReady Node Manager. Local and remote management is performed through an RS232 or Ethernet port on the communications module. The module can be installed in a WaveReady 3500F or 3100 shelf mounted in 19- or 23-inch telecommunications racks.

Applications

  • Serves as a booster or pre/inline amplifier
  • Use for Access and Metro optical networks
  • Works with point-to-point applications Compliance
  • T elcordia NEBS Level 3
  • FDA Class 1M laser device
  • FCC Class A device
  • UL 60950-1 First Edition
  • CAN/CSA C22.2 No. 60950 01
  • C E
  • IEC 60825-2
  • RoHS (exemptions 7b, 8a) WaveReady™ WRA-110, WRA-113, WRA-116, WRA-119 Single-channel, Erbium-doped Fiber Amplifiers NORTH AMERICA : 800 498-JDSU (5378) WEBSITE : www.jdsu.com/wavereadyWORLDWIDE : +800 5378-JDSU

WRA-110, WRA-113, WRA-116, WRA-119 Optical Performance1 Parameter Minimum Typical Maximum Operating wavelength range 1530 nm — 1563 nm Input power range WRA-110 –23 dBm — +3 dBm WRA-113 –29 dBm — +3 dBm WRA-116 –30 dBm — +3 dBm WRA-119 –30 dBm — +3 dBm Total output power (User configurable in constant Pout mode; 0.1 dB set resolution) WRA-110 –10 dBm — +10 dBm WRA-113 –10 dBm — +13 dBm WRA-116 –10 dBm — +16 dBm WRA-119 –10 dBm — +19 dBm Input LOS threshold configurable range –38 dBm — 0 dBm (User configurable; 1.0 dB set resolution) Power measurement accuracy (all detectors) P ≥ –29 dBm –0.7 dB — +0.7 dB Gain (User configurable in constant gain mode; 0.1 dB set resolution) 7 dB — 26 dB WRA-110 7 dB — 13 dB WRA-113 7 dB — 19 dB WRA-116 7 dB — 26 dB WRA-119 7 dB — 26 dB Polarization dependent gain — — 0.3 dB Gain accuracy (Relative to gain target, in constant gain mode) –1.25 dB — +1.25 dB Gain stability (Peak-to-peak, in constant gain mode) –0.1 dB — 0.1 dB Noise figures see Figures 1, 2, 3, and 4 Polarization mode dispersion — — 0.5 ps Remnant 980 to output — — –30 dBm Return loss –40 dB — — Electrical Specifications2 Parameter Minimum Typical Maximum DC supply voltage — –48 V— Power dissipation — 12 W 17 W Alarm relay signals Dry contact major and minor alarms. Relay open under normal operation. Relay closed when power is off. 1 Unless otherwise stated, all specifications are end-of-life, across all temperature and input conditions. 2Electrical specifications assume installation in a WaveReady 3500F or 3100 shelf (DMS-3500FSE03 or DMS-3100DC004).

NORTH AMERICA : 800 498-JDSU (5378) WEBSITE : www.jdsu.com/wavereadyWORLDWIDE : +800 5378-JDSU

Ordering Information

WRA-110, WRA-113, WRA-116, WRA-119 Product specifications and descriptions in this document subject to change without notice. © 2009 JDS Uniphase Corporation 30149178 001 0109 WRA1XX.DS.CMS.AE January 2009 Specifications Physical Specifications Parameter Typical Weight (approximate) 0.73 kg (1.6 lb) Environmental Specifications Parameter Minimum Typical Maximum Normal operating temperature 0 °C— 4 0 °C Extended operating temperature –5 °C— 5 5 °C Storage temperature –40 °C— 8 5 °C Relative humidity (non-condensing) 5% — 90% Interface Specifications Interface Description Optical LC/UPC SMF Craft Requires WaveReady 3100 or 3500F series shelf and a WaveReady COM200 communications module. Craft access through RS232/DB-9 connector on front panel of COM200 module. TL1/SNMP Requires WaveReady 3500F or 3100 series shelf and a WaveReady COM200 communications module. TL1/SNMP interfaces via the 10/100BaseT Ethernet/RJ45 connector on the front panel of a COM200. Front panel Six LEDs: CARD (power); MAJ/CRIT (major/critical alarm); MIN (minor alarm); TX and RX (port status), Laser On For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Product Code Description WRA-110 Single-channel EDFA, 10 dBm output WRA-113 Single-channel EDFA, 13 dBm output WRA-116 Single-channel EDFA, 16 dBm output WRA-119 Single-channel EDFA, 19 dBm output Associated Parts DMS-3100DC004 WR3100 1U Shelf DMS-3500FSE03 WR3500F Shelf COM-200ET003Y COM200 Communication module