WR5000MN WELLER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Item No: WR5000MN The WR5000M is a 120V 700W five channel digital conductive/connective Rework System is self-contained multi- channel rework stations. Independent tool channels with automatic tool recognition. Simultaneous use of multiple tools. Self contained vacuum and air. Programmable process control through special function menus. Continuous productivity with no end of cycle hot air cool down time. ECO button for sleep mode. Weller micro- tools, WMRP and WMRT are not compatible. KEY FEATURES 700 watts of power over 5 independently-controlled channels Specified tips included PC Connectivity and data logging software included (WR3ME only) Note: Not applicable with WRK kit or WVP vacuum Weller micro tool, not compatible with WMRP and WMRT (only compatible with WR2)
Dimensions L x W x H 11.0 x 9.4 x 4.0 in Automatic Tool Identification Yes Capacity (l/min) 18 l/min Desoldering Yes Equipotential Bonding Yes Equipotential Bonding Socket Via 3.5mm Pawl Socket on Back of Device (Hard-Grounded) ESD Safe Yes Hot Air (picto) Yes IPC Compliant (Tip to Ground) Corresponds to IPC-J-001 Maximum Hot Air Flow Rate l/min (Depends on Tool) 15 l/min Maximum Volume 0.7 bar Number of Channels 3 Overcurrent Release 2.0 A Power 700 W Temperature Accuracy °C ± 9 °C Temperature Accuracy °F ± 17 °F Temperature Range °C 93 - 454 °C Temperature Range °F 199 - 849 °F Temperature Stability °C ±2 °C Temperature Stability °F ±4 °F Tip Type WT UPC 037103304506 USB Yes Vacuum 0.7 bar (79 kPA) (8 psi)