WR12 WALSIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
Page 1 of 10 ASC_WR_V24 SEP 2016 WR12, WR08, WR06, WR04 1%, 5% Thick Film General Purpose Chip Resistors Size 1206, 0805, 0603, 0402 RoHS 2 compliant & Halogen free *Contents in this sheet are subject to change without prior notice.
Page 2 of 10 ASC_WR_V24 SEP 2016 FEATURE 1. High reliability and stability 2. Reduced size of final equipment 3. Lower assembly costs 4. Higher component and equipment reliability 5. RoHS 2 compliant and Halogen free products APPLICATION Consumer electrical equipment EDP, Computer application Telecom application
DESCRIPTION
The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to within tolerance by laser cutting of this resistive layer. The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For ease of soldering the outer layer of these end terminations is a Tin (lead free) alloy. Fig 1. Construction of Chip-R
Page 3 of 10 ASC_WR_V24 SEP 2016 QUICK REFERENCE DATA Item General Specification Series No. WR12 WR08 WR06 WR04 Size code 1206(3216) 0805(2012) 0603(1608) 0402(1005) Resistance Range 1~10M (5% tolerance), Jumper 1~10M (1% tolerance), Resistance Tolerance 1% E96/E24 5% E24 1% E96/E24 5% E24 1% E96/E24 5% E24 1% E96/E24 5% E24 TCR (ppm/C) 10M R＞10 R10 100 -200~+400 Max. dissipation @ Tamb=70C 1/4 W 1/8 W 1/10 W 1/16 W Max. Operation Voltage (DC or RMS) 200V 150V 75V 50V Max. Overload Voltage (DC or RMS) 400V 300V 150V 100V Climatic category 55/155/56 Note : 1. This is the maximum vo ltage that may be continuously supplied to the resistor e lement, see “IEC publication 60115-8” 2. Max. Operation Voltage : So called RCWV (Rated Continuous Working Voltage) is determined by ValueResistancePower RatedRCWV or Max. RCWV listed above, whichever is lower. 3. The resistance of Jumper is defined <0.05 . DIMENSIONS (unit : mm) WR12 WR08 WR06 WR04
Page 4 of 10 ASC_WR_V24 SEP 2016 MARKING Size \\ Nr. Of digit of code\\tolerance 5% 1% 1206 (3216) 3-digits marking 4-digits marking 0805 (2012) 3-digits marking 4-digits marking 0603 (1608) 3-digits marking 3-digits marking 0402(1005) N0 MARKING 3-digits marking（5% : 1206 & 0805 & 0603 ） Each resistor is marked with a three digits code on the protective coating to designate the nominal resistance value. 3-digits marking（1% : 0603） Nominal resistance Description 1.E-24 series As 0603 WR06X 5%. 2.E-96 series The 1st two digit codes are referring to the CODE on the table, the 3rd code is the index of resistance value : EX : 17.8Ω=25X，178Ω=25A，1K78 =25B 17K8=25C， 178K=25D， 1M78=25E 3. Remark There is no marking for the items are not under E-24 and E-96 series CODE R_value CODE R_value CODE R_Value CODE R_value CODE R_value CODE R_value CODE R_value CODE R_value 01 100 13 133 25 178 37 237 49 316 61 422 73 562 85 750 02 102 14 137 26 182 38 243 50 324 62 432 74 576 86 768 03 105 15 140 27 187 39 249 51 332 63 442 75 590 87 787 04 107 16 143 28 191 40 255 52 340 64 453 76 604 88 806 05 110 17 147 29 196 41 261 53 348 65 464 77 619 89 825 06 113 18 150 30 200 42 267 54 357 66 475 78 634 90 845 07 115 19 154 31 205 43 274 55 365 67 487 79 649 91 866 08 118 20 158 32 210 44 280 56 374 68 499 80 665 92 887 09 121 21 162 33 215 45 287 57 383 69 511 81 681 93 909 10 124 22 165 34 221 46 294 58 392 70 523 82 698 94 931 11 127 23 169 35 226 47 301 59 402 71 536 83 715 95 953 12 130 24 174 36 232 48 309 60 412 72 549 84 732 96 976 4-digits marking（1% : 1206/0805） Each resistor is marked with a four digits code on the protective coating to designate the nominal resistance value. Example RESISTANCE 10 12 100 6800 47000 3-digits marking（1206 & 0805 & 0603 5% ） 100 120 101 682 473 4-digits marking 10R0 12R0 1000 6801 4702
Page 5 of 10 ASC_WR_V24 SEP 2016 FUNCTIONAL DESCRIPTION Product characterization Standard values of nominal resistance are taken from the E24 series for resistors with a tolerance of 5%, and E96 series for resistors with a tolerance of 1%. The values of the E24/E96 series are in accordance with “IEC publication 60063” Derating The power that the resistor can dissipate depends on the operating temperature; see Fig.2 Figure 2 Maximum dissipation in percentage of rated power as a function of the ambient temperature for WR12, WR08, WR06, WR04 MOUNTING Due to their rectangular shapes and small tolerances, Surface Mountable Resistors are suitable for handling by automatic placement systems. Chip placement can be on ceramic substrates and printed-circuit boards (PCBs). Electrical connection to the circuit is by individual soldering condition. Storage and Handling Conditions: 1. Products are recommended to be used up within two years since operation date as ensured shelf life. Check solderability in case shelf life extension is needed. 2. To store products with following condition: Temperature :5 to 40℃ Humidity :20 to 70% relative humidity 3. Caution: a.Don't store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxdization of electrode, which easily be resulted in poor soldering b.To store products on the shelf and avoid exposure to moisture. c.Don't expose products to excessive shock, vibration, direct sunlight and so on
Page 6 of 10 ASC_WR_V24 SEP 2016 SOLDERING CONDITION follows J-STD-020D The robust construction of chip resistors allows them to be completely immersed in a solder bath of 260C for 10 seconds. Therefore, it is possible to mount Surface Mount Resistors on one side of a PCB and other d iscrete components on the reverse (mixed PCBs). Surface Mount Resistors are tested for solderability at 235C during 2 seconds. The test condition for no leaching is 260 C for 30 seconds. Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 3. Fig 3. Infrared soldering profile for Chip Resistors CATALOGUE NUMBERS The resistors have a catalogue number starting with WR12 X 472_ J T L Size code WR12 : 1206 WR08 : 0805 WR06 : 0603 WR04: 0402 Type code X : Jumper 5%, 1 ~ 10M 1%, 10 ~ 1M W : Resistance code 5%, E24: 2 significant digits followed by no. of zeros and a blank 4.7 =4R7_ 10 =100_ 220 =221_ Jumper =000_ (“_” means a blank) 1%, E24+E96: 3 significant digits followed by no. of zeros 102 =1020 37.4K =3742 Tolerance F : 1% J : 5% P : Jumper Packaging code T : 7” Reeled taping Q : 10” Reeled taping G : 13” Reeled taping H : 13'' reel 50Kpcs only for 0402 B : Bulk D : 7'' reel 20Kpcs only for 0402 A : 7" reel 15Kpcs only for 0402 Termination code L= Sn base (lead free) WR12, WR08, WR06: 1. Reeled tape packaging : 8mm width paper taping 5000pcs per 7” reel, 10kpcs per 10” reel, 20kpcs per 13” reel. 2. Bulk packaging : 5000pcs per poly-bag
Page 7 of 10 ASC_WR_V24 SEP 2016 WR04: 1. Reeled tape packaging : 8mm width paper taping 10,000pcs per 7” reel, 20,000pcs per 10” reel. 70,000pcs per 13” reel. 2. Bulk packaging : 10,000pcs per poly-bag
Page 8 of 10 ASC_WR_V24 SEP 2016 TEST AND REQUIREMENTS Essentially all tests are carried out according to the schedule of IEC publication 115-8, category LCT/UCT/56(rated temperature range : Lower Category Temperature, Upper Category Temperature; damp heat, long term, 56 days). The testing also meets the requirements specified by EIA, EIAJ and JIS. The tests are carried out in accordance wi th IEC publication 68, "Recommended basic climatic and mechanical robustness testing procedure for electronic components" and under standard atmospheric conditions according to IEC 60068-1, subclause 5.3. Unless otherwise specified, the following value supplied : Temperature: 15°C to 35°C. Relative humidity: 45% to 75%. Air pressure: 86kPa to 106 kPa (860 mbar to 1060 mbar). All soldering tests are performed with midly activated flux. TEST PROCEDURE / TEST METHOD REQUIREMENT Resistor 0 Electrical Characteristics JISC5201-1: 1998 Clause 4.8 - DC resistance values measurement - Temperature Coefficient of Resistance (T.C.R) Natural resistance change per change in degree centigrade. 121 12 10 ttR RR (ppm/C) t1 : 20°C+5°C-1°C; t2 : -55°C or +155°C R1 : Resistance at reference temperature (20°C+5°C/-1°C) R2 : Resistance at test temperature (-55°C or +155°C) Within the specified tolerance Refer to “QUICK REFERENCE DATA” <50m Resistance to soldering heat(R.S.H) JISC5201-1:1998 Clause 4.18 Un-mounted chips completely immersed for 10±1second in a SAC solder bath at 260℃±5ºC no visible damage <50m Solderability JISC5201-1: 1998 Clause 4.17 Un-mounted chips completely immersed for 2±0.5 second in a SAC solder bath at 235℃±5℃ 95% coverage min., good tinning and no visible damage Temperature cycling JISC5201-1: 1998 Clause 4.19 30 minutes at -55C3C, 2~3 minutes at 20°C+5°C-1°C, 30 minutes at +155C3C, 2~3 minutes at 20°C+5°C-1°C, total 5 continuous cycles No visible damage <50m High Temperature Exposure MIL-STD-202 method 108 1000+48/-0 hours; without load in a temperature chamber controlled 1553C No visible damage <50m Bending strength JISC5201-1: 1998 Clause 4.33 Resistors mounted on a 90mm glass epoxy resin PCB(FR4), bending once 3mm for 10sec, 5mm for WR04 No visual damaged <50m Adhesion JISC5201-1: 1998 Clause 4.32 Pressurizing force: 5N, Test time: 10±1sec. No remarkable damage or removal of the terminations Short Time Overload (STOL) JISC5201-1: 1998 Clause 4.13 2.5 times RCWV or max. overload voltage, for 5seconds 5%: R/R max. (2%+0.05) No visible damage <50m
Page 9 of 10 ASC_WR_V24 SEP 2016 TEST PROCEDURE / TEST METHOD REQUIREMENT Resistor 0 Load life in Humidity JISC5201-1: 1998 Clause 4.24 1000 +48/-0 hours, loaded with RCWV or Vmax in humidity chamber controller at 40 C2C and 90~95% relative humidity, 1.5hours on and 0.5 hours off No visible damage <50m Load life (endurance) JISC5201-1: 1998 Clause 4.25 1000 +48/-0 hours, loaded with RCWV or Vmax in chamber controller 70±2ºC, 1.5 hours on and 0.5 hours off No visible damage <50m Insulation Resistance JISC5201-1: 1998 Clause 4.6 Apply the maximum overload voltage (DC) for 1minute R≧10GΩ Dielectric Withstand Voltage JISC5201-1: 1998 Clause 4.7 Apply the maximum overload voltage (AC) for 1 minute No breakdown or flashover TEST CONDITION FOR JUMPER (0 ) Item WR12 WR08 WR06 WR04 Power Rating At 70C 1/4W 1/8W 1/10W 1/16W Resistance MAX.50m Rated Current 2A 1.5A 1A 1A Peak Current 5A 3.5A 3A 2A Operating Temperature -55 ~ +155C
Page 10 of 10 ASC_WR_V24 SEP 2016 PACKAGING Paper Tape specifications (unit :mm) Series No. A B W F E WR12 3.60±0.20 2.00±0.20 WR08 2.40±0.20 1.65±0.20 WR06 1.90±0.20 1.10±0.20 WR04 1.20±0.10 0.70±0.10 Series No. P1 P0 D T WR12 / WR08 4.00±0.10 4.00±0.10 1.0 0.050.1 Max. 1.0 WR06 0.65±0.05 WR04 2.00±0.10 0.40±0.05 7” Reel dimensions Symbol A B C D