WPSPG-XXMS200

WPSPG-20L200 WPI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 31

Technical content

THIS PAGE INTENTIONALLY LEFT BLANK.

WPSPG Spark Gap Protectors | 1 WP SPG - SPARK GAP PROTECTORS Table of Contents

2 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors – L Series WPSPG - 20 L 200 (1) World Products Spark Gap Protector (2) DC Spark-over Voltage Tolerance: (Example: 20=20% tolerance) (3) Series Type L= Low Current (4) DC Spark-over Voltage: (Example: 200 = 200V) TA Part Numbering System FEATURES: 1. RoHS Compliant and Halogen Free 2. UL497B – PENDING 3. Fast Responding 4. Low Capacitance 5. Zero leakage current 6. Stable electrical characteristics over time 7. Can withstand repeated surges 8. Symmetrical 9. Operate and storage temperature: -40ºC to +85ºC (5) Packaging: Nil = Bulk TA = Taped/Ammo Box

WPSPG Spark Gap Protectors | 3 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - L Series WPSPG-XXL 300 100 WPSPG-XXL 400 250 250 250 250 WPSPG-XXL 500 WPSPG-XXL 600 WPSPG-XXL 700 WPSPG-XXL 1000 500 WPSPG-XXL 1500 500 >500A 100A >150 times 4.0 ± 0.5 2.0 ± 0.5D d 0.5 ± 0.05 Color Code 1 Color Code 2 Color Code 3 D d 1L L1L L WPSPG-XXL 140 200 220 300 400 500 600 700 1000 140 1500 100 100 100 100 100 100 100 100 100 100 WPSPG-XXL 220 100 WPSPG-XXL 200 100 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Note: Vs±XX% (DC Spark-over Voltage Tolerance 30% and 20%),140V device is only available in 30% tolerance. 28.0 ± 3.0 DIMENSIONS in mm.

ELECTRICAL CHARACTERISTICS

4 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - L Series COLOR CODE Part Number Color Code 1 Color Code 2 Color Code 3 WPSPG-XXL220 Red Red WPSPG-XXL200 Red WPSPG-XXL400 Yellow WPSPG-XXL500 Green WPSPG-XXL600 Blue WPSPG-XXL700 White Brown WPSPG-XXL1000 Black nworB 0051LXX-GPSPW Green WPSPG-XXL140 Black Yellow WPSPG-XXL300 Orange Red TEST METHODS AND RESULTS ITEM TEST METHOD STANDARD DC Spark over Voltage(Vs) Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 0.5mA max. And the DC voltage ascends up within as follow condition. Vs <1000V 100V/second Vs >1000V 500V/second Meet specified value. Insulation Resistance(IR) Measure the insulation resistance across the terminal at regular voltage. But the test voltage doesn’t go beyond the DC spark-over voltage. Capacitance Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHZ) between terminals. Static Life 10KV with 1500pf condenser is discharged through 0Ω resistor. 200 times at an interval of 10sec. Rate of change ≤30%. Characteristics of other items must meet the specified value. Surge Current Capacity The following impulse current for specified current applied ±5 times at 60 seconds intervals. Thereafter, outer appearance shall be visually examined. Type Impulse current Vs < 400V 1.2/50μs & 8/20μs, 500A Vs > 400V 1.2/50μs & 8/20μs, 500A, electrically connected with a resistor (1~2 Ω). No crack and no failures. Cold Resistance Measurement after -40ºC/1000 HRS & normal temperature/2 HRS. Features are conformed to rated spec. Heat Resistance Measurement after 125ºC/1000 HRS & normal temperature/2 HRS. Humidity Resistance Measurement after humidity 90~95%(45ºC) /1000 HRS & normal temperature/2 HRS. Temperature Cycle 10 times repetition of cycle -40ºC/30min normal, temp/2 min 125ºC/30min, measurement after normal temp/2 HRS. Solder Ability Apply flux and immerse in molten solder 230±5ºC for 3sec up to the point of 1.5mm from body. Check for solder adhesion. Lead wire is evenly covered by solder. Solder Heat Measurement after lead wire is dipped up to the point of 1.5mm from body into 260±5ºC solder for 10sec. Conformed to rated spec. Pull Strength Apply 0.5kg load for 10sec. Lead shall not pull out or snap. Flexural Strength Bend lead wire at the point of 2mm from body under 0.25 load and back to its original point. Repeat 1 time.

WPSPG Spark Gap Protectors | 5 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - L Series 100 150 200 250 300 0 0.5 1 1.5 2 2.5 3 3.5 4 TIME (MINUTES) TEMPERATURE (ºC) Maximum Wave 260C Cooling Soldering Preheating Peak Temperature 260 ºC Dipping Time 10 seconds Soldering 1 time Item Conditions Flow/wave Soldering Recommendation Parameters unit: mm Item Dimensions A 78 B 78 C 255 C B A L 5000 pcs M 2500 pcs H 1500 pcs SERIES Minimum Package Quantity R L P Z S t TT W D ITEM W P T Z R t S D L L1 & L2 Dimensions (mm) 52 ± 1.5 5.0 ± 0.5 6.0 ± 1.0 1.2 max. Leads cannot extend beyond tape. 3.2 max. 0.8 max. 1.5 ~ 4.5 0.5 ± .05 4.5 max 1 max Lead Taping L1 L2 INNER BOX DIMENSIONS

6 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors – M Series (1) World Products Spark Gap Protector (2) DC Spark-over Voltage Tolerance: (Example: 20=20% tolerance) (3) Series Type M = Medium Current (4) DC Spark-over Voltage: (Example: 200 = 200V) Part Numbering System FEATURES: 1. RoHS Compliant and Halogen Free 2. UL497B – File #E135015 (see specific voltage values) 3. Fast Responding 4. Low Capacitance 5. Zero leakage current 6. Stable electrical characteristics over time 7. Can withstand repeated surges 8. Symmetrical WPSPG - 20 M 200 TA (5) Packaging: Nil = Bulk TA = Taped/Ammo Box

WPSPG Spark Gap Protectors | 7 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - M Series DIMENSIONS in mm.

1000A 100A >200 times 4.3 ± 0.5 2.6 ± 0.5D d 0.5 ± 0.05 Color Code 1 Color Code 2 Color Code 3 D d LL1 L1 L 100 100 100 100 100 100 100 100 100 100 100 100 100 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 Note: Vs±XX% (DC Spark-over Voltage Tolerance 30% and 20%),140V device is only available in 30% tolerance. *UL 497B recognized (30% tolerance only). Item 28.0 ± 3.0 *WPSPG-XXM140 *WPSPG-XXM200 *WPSPG-XXM220 *WPSPG-XXM300 *WPSPG-XXM400 *WPSPG-XXM500 WPSPG-XXM600 WPSPG-XXM700 WPSPG-XXM1000 WPSPG-XXM1500 200 220 300 400 500 600 700 1000 140 1500

8 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - M Series Part Number Color Code 1 Color Code 2 Color Code 3 WPSPG-XXM220 Red Red WPSPG-XXM200 Red WPSPG-XXM400 Yellow WPSPG-XXM500 Green WPSPG-XXM600 Blue WPSPG-XXM700 Purple WPSPG-XXM1000 Black nworB 0051MXX-GPSPW Green WPSPG-XXM140 Black Yellow WPSPG-XXM300 Orange Red COLOR CODE TEST METHODS AND RESULTS ITEM TEST METHOD STANDARD DC Spark over Voltage(Vs) Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 0.5mA max. And the DC voltage ascends up within as follow condition. Vs <1000V 100V/second Vs >1000V 500V/second Meet specified value Insulation Resistance(IR) Measure the insulation resistance across the terminal at regular voltage. But the test voltage doesn’t go beyond the DC spark-over voltage. Capacitance Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHZ) between terminals. Static Life 10KV with 1500pf condenser is discharged through 0Ω resistor. 200 times at an interval of 10sec. Rate of change ≤30%. Characteristics of other items must meet the specified value. Surge Current Capacity The following impulse current for specified current applied ± 5 times at 60 seconds intervals. Thereafter, outer appearance shall be visually examined. Type Impulse current Vs < 400V 1.2/50μs & 8/20μs, 1000A Vs > 400V 1.2/50μs & 8/20μs, 1000A, electrically connected with a resistor (1~2 Ω). No crack and no failures Cold Resistance Measurement after -40ºC/1000 HRS & normal temperature/2 HRS. Features are conformed to rated spec. Heat Resistance Measurement after 125ºC/1000 HRS & normal temperature/2 HRS. Humidity Resistance Measurement after humidity 90~95% (45ºC) /1000 HRS & normal temperature/2 HRS. Temperature Cycle 10 times repetition of cycle -40ºC/30min normal, temp/2 min 125ºC/30min, measurement after normal temp/2 HRS. Solder Ability Apply flux and immerse in molten solder 230± 5ºC for 3sec up to the point of 1.5mm from body. Check for solder adhesion. Lead wire is evenly covered by solder. Solder Heat Measurement after lead wire is dipped up to the point of 1.5mm from body into 260± 5ºC solder for 10sec. Conformed to rated spec. Pull Strength Apply 0.5kg load for 10sec. Lead shall not pull out or snap. Flexural Strength Bend lead wire at the point of 2mm from body under 0.25 load and back to its original point. Repeat 1 time. Green

WPSPG Spark Gap Protectors | 9 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - M Series 100 150 200 250 300 0 0.5 1 1.5 2 2.5 3 3.5 4 TIME (MINUTES) TEMPERATURE (ºC) Maximum Wave 260C Cooling Soldering Preheating Peak Temperature 260 ºC Dipping Time 10 seconds Soldering 1 time Item Conditions Flow/wave Soldering Recommendation Parameters unit: mm Item Dimensions A 78 B 78 C 255 C B A L 5000 pcs M 2500 pcs H 1500 pcs SERIES Minimum Package Quantity R L P Z S t TT W D ITEM W P T Z R t S D L L1 & L2 Dimensions (mm) 52 ± 1.5 5.0 ± 0.5 6.0 ± 1.0 1.2 max. Leads cannot extend beyond tape. 3.2 max. 0.8 max. 1.5 ~ 4.5 0.5 ± .05 3.0 - 7.5 1 max Lead Taping L1 L2 INNER BOX DIMENSIONS

10 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors – H Series (1) World Products Spark Gap Protector (2) DC Spark-over Voltage Tolerance: (Example: 20=20% tolerance) (3) Series Type H= High Current (4) DC Spark-over Voltage: (Example: 200 = 200V) Part Numbering System FEATURES: 1. RoHS Compliant and Halogen Free 2. UL497B – File #E135015 (see specific voltage values) 3. Fast Responding 4. Low Capacitance 5. Zero leakage current 6. Stable electrical characteristics over time 7. Can withstand repeated surges 8. Symmetrical WPSPG - 20 H 200 TA (5) Packaging: Nil = Bulk TA = Taped/Ammo Box

WPSPG Spark Gap Protectors | 11 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - H Series 400 250 100 500 250 100 WPSPG-XXH700 700 250 100 WPSPG-XXH1000 1000 500 100 WPSPG-XXH1500 1500 500 100 WPSPG-XXH1800 1800 500 100 WPSPG-XXH2000 2000 500 100 WPSPG-XXH2400 2400 500 100 WPSPG-XXH2700 2700 500 100 WPSPG-XXH3000 3000 500 100 WPSPG-XXH3600 3600 500 100 WPSPG-XXH4000 4000 500 100 WPSPG-XXH4500 4500 500 100 WPSPG-XXH5000 5000 500 100 **>2000A >3000A 100A >250 times 4.0±0.5 140V – 700V 3.1±0.5D d 0.5±0.05 Color Code 1 Color Code 2 Color Code 3 D d 1L L1L 5.3±-0.5 1000V – 5000V L 140 50 100 300 100 100 200 100 100 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 DC Spark-Over Voltage *WPSPG-XXH140 *WPSPG-XXH200 *WPSPG-XXH300 *WPSPG-XXH400 *WPSPG-XXH500 DIMENSIONS (in mm) * UL497B Recognized (30% tolerance only). **Parts rated 1000V – 5000V 1.2/50µs and 8/20µs, with 3000A rating add “X” suffix to part number. Note: Vs±XX% (DC Spark-over Voltage Tolerance 30% and 20%),140V device is only available in 30% tolerance. 28.0±3.0

12 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - H Series WPSPG-XXH300 Orange WPSPG-XXH200 Red WPSPG-XXH500 Green WPSPG-XXH700 Purple WPSPG-XXH1000 Brown Black WPSPG-XXH1500 Brown Green WPSPG-XXH1800 Brown Gray WPSPG-XXH2000 Red Black WPSPG-XXH2400 Red Yellow WPSPG-XXH2700 Red Purple WPSPG-XXH3000 Orange Black WPSPG-XXH3600 Orange Blue WPSPG-XXH4000 Yellow Black WPSPG-XXH4500 Yellow Green WPSPG-XXH5000 Green Black WPSPG-XXH140 Black Yellow WPSPG-XXH400 Yellow Red Red Red Red Red Red Red Red Red Red Red TEST METHODS AND RESULTS COLOR CODE Color Code 1 Color Code 3Color Code 2PartNumber ITEM TEST METHOD STANDARD DC Spark over Voltage(Vs) Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 0.5mA max. And the DC voltage ascends up within as follow condition. Vs <1000V 100V/second Vs >1000V 500V/second Meet specified value Insulation Resistance(IR) Measure the insulation resistance across the terminal at regular voltage. But the test voltage doesn’t go beyond the DC spark-over voltage. Capacitance Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHZ) between terminals. Static Life 10KV with 1500pf condenser is discharged through 0Ω resistor. 200 times at an interval of 10sec. Rate of change ≤30%. Characteristics of other items must meet the specified value. Surge Current Capacity The following impulse current for specified current applied ±5 times at 60 seconds intervals. Thereafter, outer appearance shall be visually examined. Type Impulse current Vs <1000V 1.2/50μs & 8/20μs, 3000A, electrically connected with a resistor (1~2 Ω). Vs >1000V 1.2/50μs & 8/20μs, 3000A, electrically connected with a resistor (4~6 Ω). No crack and no failures Cold Resistance Measurement after -40ºC/1000 HRS & normal temperature/2 HRS. Features are conformed to rated spec. Heat Resistance Measurement after 125ºC/1000 HRS & normal temperature/2 HRS. Humidity Resistance Measurement after humidity 90~95%(45ºC) /1000 HRS & normal temperature/2 HRS. Temperature Cycle 10 times repetition of cycle -40ºC/30min normal, temp/2 min 125ºC/30min, measurement after normal temp/2 HRS. Solder Ability Apply flux and immerse in molten solder 230±5ºC for 3sec up to the point of 1.5mm from body. Check for solder adhesion. Lead wire is evenly covered by solder. Solder Heat Measurement after lead wire is dipped up to the point of 1.5mm from body into 260±5ºC solder for 10sec. Conformed to rated spec. Pull Strength Apply 0.5kg load for 10sec. Lead shall not pull out or snap. Flexural Strength Bend lead wire at the point of 2mm from body under 0.25 load and back to its original point. Repeat 1 time.

WPSPG Spark Gap Protectors | 13 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - H Series 100 150 200 250 300 0 0.5 1 1.5 2 2.5 3 3.5 4 TIME (MINUTES) TEMPERATURE (ºC) Maximum Wave 260C Cooling Soldering Preheating Peak Temperature 260 ºC Dipping Time 10 seconds Soldering 1 time Item Conditions Flow/wave Soldering Recommendation Parameters unit: mm Item Dimensions A 78 B 78 C 255 C B A L 5000 pcs M 2500 pcs H 1500 pcs SERIES Minimum Package Quantity R L P Z S t TT W D ITEM W P T Z R t S D L L1 & L2 Dimensions (mm) 52 ± 1.5 5.0 ± 0.5 6.0 ± 1.0 1.2 max. Leads cannot extend beyond tape. 3.2 max. 0.8 max. 1.5 ~ 4.5m 0.5 ± .05 3.0 - 7.5 1 max Lead Taping L1 L2 INNER BOX DIMENSIONS

14 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors – HX Series WPSPG - 20 HX 1000 (1) World Products Spark Gap Protector (2) DC Spark-over Voltage Tolerance: (Example: 20=20% tolerance) (3) Series Type (4) DC Spark-over Voltage: (Example: 1000 = 1000V) (5) Packaging: Nil = Bulk TA = Taped/Ammo Box TA Part Numbering System FEATURES: 1. RoHS Compliant and Halogen Free 2. UL Pending 3. Fast Responding 4. Low Capacitance 5. Zero leakage current 6. Stable electrical characteristics over time 7. Can withstand repeated surges 8. Bilateral and Symmetrical 9. Micro-gap design and low clamping 10. No dark effect HX = Super High Current/High Voltage

WPSPG Spark Gap Protectors | 15 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - HX Series 001 005 00010001HXXX-GPSPW 001 005 0051 0051HXXX-GPSPW 001 005 0081 0081HXXX-GPSPW 001 005 0002 0002HXXX-GPSPW 001 005 0042 0042HXXX-GPSPW 001 005 0072 0072HXXX-GPSPW 001 005 0003 0003HXXX-GPSPW 001 005 0063 0063HXXX-GPSPW 001 005 0004 0004HXXX-GPSPW 001 005 0054 0054HXXX-GPSPW 001 005 0005 0005HXXX-GPSPW 3000A 4.1 ± 0.5D d 0.5±0.05 Color Code 1 Color Code 2 Color Code 3 D d L1 L1L 9.0 ± 1.5 28.0 ± 3.0 L 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 --- --- --- 1200V (3 sec) 1500V (3 min) 1800V (3 sec) 1800V (3 sec) 2000V (1 min) 1200V (3 sec) 2000V (1 min) --- 1.0 DIMENSIONS (in mm) Note: Vs±XX% (DC Spark-over Voltage Tolerance 30% and 20%). DC Spark-over Voltage Insulation Resistance Capacitance Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 1.0mA max. And the DC voltage ascends up within 500V/second. Measure the insulation resistance across the terminal at regular voltage. Test voltage may not exceed the DC spark-over voltage. Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHz) between terminals. AC Withstanding Voltage

16 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - HX Series COLOR CODE Part Number Color Code 1 Color Code 2 Color Code 3 Brown Black Brown Green Brown Gray Red Black Red Yellow Red Purple Orange Black Orange Blue Yellow Black Yellow Green Green Black Red Red Red Red Red Red Red Red Red Red Red WPSPG-XXHX1000 WPSPG-XXHX1500 WPSPG-XXHX1800 WPSPG-XXHX2000 WPSPG-XXHX2400 WPSPG-XXHX2700 WPSPG-XXHX3000 WPSPG-XXHX3600 WPSPG-XXHX4000 WPSPG-XXHX4500 WPSPG-XXHX5000 Item Test Method Standard Cold Resistance Measurement after -40 /48 HRS & normal temperature/2 HRS. Features are conformed to rated spec. Heat Resistance Measurement after +85 /48 HRS & normal temperature/2 HRS. Humidity Resistance Measurement after humidity 90~95 (45ºC) /48 HRS & normal temperature/2 HRS. Temperature Cycle 10 times repetition of cycle -40 /30min normal, temp/2 min 125 /30min, measurement after normal temp/2 HRS. Solder Ability Apply flux and immerse in molten solder 230±5 for 3sec up to the point of 1.5mm from body. Check for solder adhesion. Lead wire is evenly covered by solder. Solder Heat Measurement after lead wire is dipped up to the point of 1.5mm from body into 260 5 solder for 10sec. Conformed to rated spec. Pull Strength Apply 0.5kg load for 10sec. Lead shall not pull out or snap. Flexural Strength Bend lead wire at the point of 2mm from body under 0.25kg load and back to its original point. Repeat 1 time. Surge Life Apply a standard impulse current (8/20 s of 100A) for 300 times at 60 seconds intervals. No crack and no failures. Surge Current Capacity Charge a 1.2/50 s & 8/20 s, 2000A, and apply it to the sample. Do this 10 times. Or 3000A, 1 time. TEST METHODS AND RESULTS

WPSPG Spark Gap Protectors | 17 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - HX Series 100 150 200 250 300 0 0.5 1 1.5 2 2.5 3 3.5 4 TIME (MINUTES) TEMPERATURE (ºC) Maximum Wave 260C Cooling Soldering Preheating Peak Temperature 260 ºC emiT gnippiD 10 seconds Soldering 1 time Item Conditions Flow/wave Soldering Recommendation Parameters Symbol Dimension(mm) W 52.0±1.5 P 10.0±0.5 L1-L2 1.0max. T 6.0±1.0 Z 1.2max. R Terminals must not project from tape. t 3.2max. S 0.8max. D 4.6max. D1 0.5±0.05 L 10.5max. Axial Taping Packaging B C A Symbol Dimension(mm) Quantity A 75.0 1000PCS C 250.0 B 114.0 Inner Box Drawing

18 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors – LS Series WPSPG - 20 LS 200 (1) World Products Spark Gap Protector (2) DC Spark-over Voltage Tolerance: (Example: 20=20% tolerance) (3) Series Type LS= Low Current Surface Mount Series (4) DC Spark-over Voltage: (Example: 200 = 200V) (5) Nil = Standard Package M = Mini Melf Package M Part Numbering System FEATURES: 1. RoHS Compliant and Halogen Free 2. UL497B – PENDING 3. Fast Responding 4. Low Capacitance 5. Zero leakage current 6. Stable electrical characteristics over time 7. Can withstand repeated surges 8. Symmetrical

WPSPG Spark Gap Protectors | 19 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - LS Series DIMENSION in mm. (1KHz-6VMAX) Surge current capacity (8/20 s) Part Number Vs(V) Test Voltage(V) IROHM(M ) C(pf) (A) 220 100 300 100 0.8 0.8 0.8 0.8 400 250 0.8 500 250 100 100 100 100 100 100 0.8 Item L 4.0 ± 0.5 D 2.1 ± 0.5 d 2.0 ± 0.5 t 0.4 ± 0.1 3.4 ± 0.5 1.4 ± 0.5 1.3 ± 0.5 0.4 ± 0.1 200 100 140 50 500 500 500 500 500 500 Note: Vs±XX% (DC Spark-over Voltage Tolerance 30% and 20%),140V device is only available in 30% tolerance. WPSPG-XXLS140 WPSPG-XXLS200 WPSPG-XXLS220 WPSPG-XXLS300 WPSPG-XXLS400 WPSPG-XXLS500 600 250 100 0.8 500WPSPG-XXLS600 700 250 100 0.8 500WPSPG-XXLS700 1000 500 100 0.8 500WPSPG-XXLS1000 Standard Mini Melf STANDARD Series DC Spark-Over Voltage Minimum Insulation Resistance Maximum Capacitance (1KHz-6VMAX) Surge current capacity (8/20 s) Part Number Vs(V) Test Voltage(V) IROHM(M ) C(pf) (A) 300 100 0.8 0.8 0.8 100 100 100 200 100 140 50 300 300 300 Note: Vs±XX% (DC Spark-over Voltage Tolerance 30% and 20%),140V device is only available in 30% tolerance. WPSPG-XXLS140M WPSPG-XXLS200M WPSPG-XXLS300M MINI MELF Series

20 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - LS Series TEST METHODS AND RESULTS ITEM TEST METHOD STANDARD DC Spark over Voltage(Vs) Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 0.5mA max. And the DC voltage ascends up within as follow condition. Vs <1000V 100V/second Vs >1000V 500V/second Meet specified value Insulation Resistance(IR) Measure the insulation resistance across the terminal at regular voltage. But the test voltage doesn’t go beyond the DC spark-over voltage. Capacitance Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHZ) between terminals. Static Life 10KV with 1500pf condenser is discharged through 0Ω resistor. 200 times at an interval of 10sec. Rate of change 30%. Characteristics of other items must meet the specified value. Surge Current Capacity The following impulse current for specified current applied ±5 times at 60 seconds intervals. Thereafter, outer appearance shall be visually examined. Type Impulse current Mini Melf 1.2/50μs & 8/20μs, 300A Standard 1.2/50μs & 8/20μs, 500A No crack and no failures Cold Resistance Measurement after -40ºC/1000 HRS & normal temperature/2 HRS. Features are conformed to rated spec. Heat Resistance Measurement after 125ºC/1000 HRS & normal temperature/2 HRS. Humidity Resistance Measurement after humidity 90~95% (45ºC) /1000 HRS & normal temperature/2 HRS. Temperature Cycle 10 times repetition of cycle -40ºC/30min normal, temp/2 min 125ºC/30min, measurement after normal temp/2 HRS. Solder Ability Apply flux and immerse in molten solder 230±5ºC for 3sec up to the end surface of the electrodes. Check for solder adhesion. The end surface is evenly covered by solder. Solder Heat Measurement after the end surface of the electrodes is dipped up to into 260±5ºC solder for 10sec. Conformed to rated spec.

WPSPG Spark Gap Protectors | 21 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - LS Series Taping Specifications Item Standard Series Mini Melf Series P 4.0 ± 0.1 P0 8.0 ± 0.1 W 12.0 ± 0.3 F 5.5 ± 0.1 E 1.75 ± 0.1 D Φ1.5 ± 0.1 K 2.3 ± 0.2 t 0.5 max. A0 2.2 ± 0.1 B0 4.3 ± 0.1 Item Standard Size D 178mm d 13mm L 15mm L d D NOTE: 3000 pcs per reel. Item Size (mm) A 185 B 179 C 67 4.0 ± 0.1 4.0 ± 0.1 8.0 ± 0.3 3.4 ± 0.1 1.5 ± 0.1 Φ1.5 ± 0.1 1.6 ± 0.1 0.2 ± 0.1 1.6 ± 0.1 4.0 ± 0.1 Mini Melf Series 178mm 13mm 11mm Note: All dimensions (mm)

22 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors – MS Series WPSPG - 20 M 200 (1) (2) (3) (4) (1) World Products Spark Gap Protector (2) DC Spark-over Voltage Tolerance: (Example: 20=20% tolerance) (3) Series Type (4) DC Spark-over Voltage: (Example: 200 = 200V) Part Numbering System FEATURES: 1. RoHS Compliant and Halogen Free 2. UL497B – File #E135015 (see specific voltage values) 3. Fast Responding 4. Low Capacitance 5. Zero leakage current 6. Stable electrical characteristics over time 7. Can withstand repeated surges 8. Symmetrical r MS= Medium Current Surface Mount Series

WPSPG Spark Gap Protectors | 23 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - MS Series DIMENSION in mm. (1KHz-6VMAX) Surge current capacity (8/20 s) Part Number Vs(V) Test Voltage(V) IROHM(M ) C(pf) (A) 220 100 300 100 0.8 0.8 0.8 0.8 400 250 0.8 500 250 100 100 100 100 100 100 0.8 Item L 5.0 ± 0.5 D 2.8 ± 0.5 d 2.6 ± 0.5 t 0.4 ± 0.1 200 100 140 50 1000 1000 1000 1000 1000 1000 Note: Vs±XX% (DC Spark-over Voltage Tolerance 30% and 20%),140V device is only available in 30% tolerance. *UL 497B recognized (30% tolerance only). *WPSPG-XXMS140 *WPSPG-XXMS200 *WPSPG-XXMS220 *WPSPG-XXMS300 *WPSPG-XXMS400 *WPSPG-XXMS500 600 250 100 0.8 1000WPSPG-XXMS600 700 250 100 0.8 1000WPSPG-XXMS700 1000 500 100 0.8 1000WPSPG-XXMS1000

24 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - MS Series TEST METHODS AND RESULTS ITEM TEST METHOD STANDARD DC Spark over Voltage(Vs) Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 0.5mA max. And the DC voltage ascends up within as follow condition. Vs <1000V 100V/second Vs >1000V 500V/second Meet specified value Insulation Resistance(IR) Measure the insulation resistance across the terminal at regular voltage. But the test voltage doesn’t go beyond the DC spark-over voltage. Capacitance Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHZ) between terminals. Static Life 10KV with 1500pf condenser is discharged through 0Ω resistor. 200 times at an interval of 10sec. Rate of change 30%. Characteristics of other items must meet the specified value. Surge Current Capacity The following impulse current for specified current applied ± 5 times at 60 seconds intervals. Thereafter, outer appearance shall be visually examined. Impulse current 1.2/50μs & 8/20μs, 1000A, electrically connected with a resistor (1~2 Ω). No crack and no failures Cold Resistance Measurement after -40ºC/1000 HRS & normal temperature/2 HRS. Features are conformed to rated spec. Heat Resistance Measurement after 125ºC/1000 HRS & normal temperature/2 HRS. Humidity Resistance Measurement after humidity 90~95%(45ºC) /1000 HRS & normal temperature/2 HRS. Temperature Cycle 10 times repetition of cycle -40ºC/30min normal, temp/2 min 125ºC/30min, measurement after normal temp/2 HRS. Solder Ability Apply flux and immerse in molten solder 230± 5ºC for 3sec up to the end surface of the electrodes. Check for solder adhesion. The end surface is evenly covered by solder. Solder Heat Measurement after the end surface of the electrodes is dipped up to into 260± 5ºC solder for 10sec. Conformed to rated spec.

WPSPG Spark Gap Protectors | 25 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - MS Series Taping Specifications Item Size (mm) A 185 B 179 C 67 Item Size (mm) P 4.0±0.1 P0 1.0±0.4 W 2.0±0.21 F 50.0±05.5 E 1.0±5.1 D Φ 1.0±5.1 K 1.0±0.3 t 50.0±03.0 A0 1.0±0.3 B0 1.0±0.6 Item Size (mm) D 178mm d 13mm L 15mm L d D NOTE: 1500 pcs per reel.

26 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors – HS Series WPSPG - 20 HS 200 (1) (2) (3) (4) (1) World Products Spark Gap Protector (2) DC Spark-over Voltage Tolerance: (Example: 20=20% tolerance) (3) Series Type HS= High Current Surface Mount Series (4) DC Spark-over Voltage: (Example: 200 = 200V) Part Numbering System FEATURES: 1. RoHS Compliant and Halogen Free 2. UL497B – File #E135015 (see specific voltage values) 3. Fast Responding 4. Low Capacitance 5. Zero leakage current 6. Stable electrical characteristics over time 7. Can withstand repeated surges 8. Symmetrical

WPSPG Spark Gap Protectors | 27 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - HS Series DIMENSION (1KHz-6VMAX) Surge current capacity (8/20 s) Part Number Vs(V) Test Voltage(V) IROHM(M ) C(pf) (A) *WPSPG-XXHS300 300 100 *WPSPG-XXHS500 500 250 0.8 0.8 0.8 0.8 WPSPG-XXHS700 700 250 0.8 WPSPG-XXHS1000 1000 500 100 100 100 100 100 100 0.8 Item L 6.0±0.5 D 3.3±0.5 d 3.1±0.5 t 0.4±0.1 *WPSPG-XXHS200 200 100 *WPSPG-XXHS140 140 50 3000 3000 3000 3000 *WPSPG-XXHS400 400 250 0.8 100 3000 3000 3000 Note: Vs±XX% (DC Spark-over Voltage Tolerance 30% and 20%),140V device is only available in 30% tolerance. *UL 497B recognized (30% tolerance only).

28 | WPSPG Spark Gap Protectors WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - HS Series TEST METHODS AND RESULTS ITEM TEST METHOD STANDARD DC Spark over Voltage(Vs) Measure starting discharge voltage (Vs) by gradually increasing applied DC voltage. Test current is 0.5mA max. And the DC voltage ascends up within as follow condition. Vs <1000V 100V/second Vs >1000V 500V/second Meet specified value Insulation Resistance(IR) Measure the insulation resistance across the terminal at regular voltage. But the test voltage doesn’t go beyond the DC spark-over voltage. Capacitance Measure the electrostatic capacitance by applying a voltage of less than 6V (at 1KHZ) between terminals. Static Life 10KV with 1500pf condenser is discharged through 0Ω resistor. 200 times at an interval of 10sec. Rate of change ≤30%. Characteristics of other items must meet the specified value. Surge Current Capacity The following impulse current for specified current applied ± 5 times at 60 seconds intervals. Thereafter, outer appearance shall be visually examined. Impulse current 1.2/50μs & 8/20μs, 3000A, electrically connected with a resistor (2~4Ω). No crack and no failures Cold Resistance Measurement after -40ºC/1000 HRS & normal temperature/2 HRS. Features are conformed to rated spec. Heat Resistance Measurement after 125ºC/1000 HRS & normal temperature/2 HRS. Humidity Resistance Measurement after humidity 90~95%(45ºC) /1000 HRS & normal temperature/2 HRS. Temperature Cycle 10 times repetition of cycle -40ºC/30min normal, temp/2 min 125ºC/30min, measurement after normal temp/2 HRS. Solder Ability Apply flux and immerse in molten solder 230± 5ºC for 3sec up to the end surface of the electrodes. Check for solder adhesion. The end surface is evenly covered by solder. Solder Heat Measurement after the end surface of the electrodes is dipped up to into 260± 5ºC solder for 10sec. Conformed to rated spec.

WPSPG Spark Gap Protectors | 29 WP SPG - SPARK GAP PROTECTORS WPSPG Spark Gap Protectors - HS Series Taping Specifications Item Size (mm) P 4.0±0.1 P0 8.0±0.1 W 16.00±0.2 F 7.5±0.05 E 1.75±0.1 D Φ1.5±0.1 K 3. 5±0.1 t 0.5Max Item Size (mm) D 330mm d 13mm L 20mm Item Size (mm) A 330 B 330 C 40 NOTE: 2000 pcs per reel. 3.5 ± 0.1 6.5 ± 0.1