WP934CB-GD KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

PRE -TRIMMED LEADS FOR PC MOUNTING. I.C. COMPATIBLE. BLACK CASE ENHANCES CONTRAST RATIO. WIDE VIEWING ANGLE . HIGH RELIABILITY LIFE MEASURED IN YEARS. UL RATING : 94V -0. HOUSING MATERIAL: TYPE 66 NYLON. RoHS COMPLIANT . WP934CB/GD GREEN

Description

The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0 .25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.

SPEC NO: DSAE9006 REV NO: V.2 DATE: MAR/25/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102002525 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Part No. Dice Lens Type Iv (mcd) @ 10mA Viewing Angle Min. Typ. 2θθθθ1/2 WP934CB/GD GREEN (GaP) GREEN DIFFUSED 8 20 40 ° Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Green 565 nm IF=20mA λD Dominant Wavelength Green 568 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Parameter Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds

SPEC NO: DSAE9006 REV NO: V.2 DATE: MAR/25/2005 PAGE: 3 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: W.J.ZHU ERP:1102002525 Green WP934CB/GD Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.