WP914ADT KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
LOW POWER CONSUMPTION. ULTRA BRIGHTNESS IS AVAILABLE. RELIABLE AND RUGGED. EXCELLENT UNIFORMITY OF LIGHT OUTPUT. SUITABLE FOR LEVEL INDICATOR. RoHS COMPLIANT. WP914ADT AMBER
Description
The Amber source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches) . 2. Tolerance is ±0 .25(0.01") unless otherwise noted . 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice .
SPEC NO: DSAF2575 REV NO: V.1 DATE: APR/20/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101011837 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Part No. Dice Lens Type Iv (mcd) @ 10 mA Viewing Angle Min. Typ. 2 θ θ θ θ 1/2 WP914ADT AMBER (GaAsP/GaP) AMBER DIFFUSED 1.8 5 100 ° Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Amber 590 nm IF=20mA λD Dominant Wavelength Amber 588 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Amber 35 nm IF=20mA C Capacitance Amber 20 pF VF=0V;f=1MHz VF Forward Voltage Amber 2.1 2.5 V IF=20mA IR Reverse Current Amber 10 uA VR = 5V Parameter Amber Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAF2575 REV NO: V.1 DATE: APR/20/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101011837 Amber WP914ADT Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAF2575 REV NO: V.1 DATE: APR/20/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP:1101011837 PACKING & LABEL SPECIFICATIONS WP914ADT