WP7104ALUP-2GD-0L KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

/G7AI.C. COMPATIBLE. /G7ABLACK CASE ENHANCES CONTRAST RATIO. /G7AWIDE VIEWING ANGLE. /G7AHIGH RELIABILITY LIFE MEASURED IN YEARS. /G7AHOUSING MATERIAL: PPA. /G7ARoHS COMPLIANT. T-1 (3mm) BI-LEVEL LED INDICATO R Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.

SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 10mA Viewing Angle [1] Min. Typ. 2 θ1/2 WP7104ALUP/2GD -0L GREEN (GaP) GREEN DIFFUSED 8 20 40° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Symbol Parameter Device Typ. Max. Test ConditionsUnits λpeak Peak Wavelength Green 565 nm IF=20mA λD [1] Dominant Wavelength Green 568 nm IF=20mA ∆λ 1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Parameter Green Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V.

SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801 WP7104ALUP/2GD -0L Green

SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801 Tape Specifications (Units : mm) WP7104ALUP/2GD -0L Note: Tolerance is ±0.25 unless otherwise noted.

SPEC NO: DSAG4112 REV NO: V.1 DATE: APR/27/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1102008801 PACKING & LABEL SPECIFICATIONS WP7104ALUP/2GD -0L