WP2523SURC KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
/G4FOUTSTANDING MATERIAL EFFICIENCY. /G4FRELIABLE AND RUGGED. /G4FI.C. COMPATIBLE. /G4FRoHS COMPLIANT. PRELIMINARY SPEC WP2523SURC HYPER RED D escription The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode.
SPEC NO: DSAF2454 REV NO: V.1 DATE: APR/19/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:S.H.CHEN ERP:1101002943 Selection Guide Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Part No. Dice Lens Type Iv (mcd) @ 20 mA Viewing Angle Min. Typ. 2 θ 1/2 WP2523SURC HYPER RED (InGaAlP) WATER CLEAR 1200 4000 12° Symbol Parameter Device Typ. Max. Test ConditionsUnits λpeak Peak Wavelength Hyper Red 640 nm IF=20mA λD Dominant Wavelength Hyper Red 628 nm IF=20mA ∆λ 1/2 Spectral Line Half-width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Parameter Hyper Red Units Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAF2454 REV NO: V.1 DATE: APR/19/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:S.H.CHEN ERP:1101002943 Hyper Red WP2523SURC
SPEC NO: DSAF2454 REV NO: V.1 DATE: APR/19/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:S.H.CHEN ERP:1101002943 PACKING & LABEL SPECIFICATIONS WP2523SURC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.