WP1703SURC KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
OUTSTANDING MATERIAL EFFICIENCY. RELIABLE AND RUGGED. I.C. COMPATIBLE. RoHS COMPLIANT. Package Dimension s Notes: 1. All dimensions are in millimeters (inches) . 2. Tolerance is ± 0.25(0.01") unless otherwise noted . 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice . WP1703SURC HYPER RED
Description
The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode .
SPEC NO: DSAF2452 REV NO: V.1 DATE: APR/28/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1101002433 Selection Guid e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A =25 °C Absolute Maximum Ratings at T A =25 °C Part No. Dice Lens Type Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2 θ θ θ θ 1/2 WP1703SURC 50 °HYPER RED (InGaAlP) WATER CLEAR 280 700 Symbol Parameter Device Typ. Max. Test Conditions Units λpeak Peak Wavelength Hyper Red 640 nm IF=20mA λD Dominant Wavelength Hyper Red 628 nm IF=20mA ∆λ 1/2 Spectral Line Half -width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Parameter Hyper Red Units Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base.
SPEC NO: DSAF2452 REV NO: V.1 DATE: APR/28/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1101002433 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/ -1nm 2. Luminous Intensity: +/ -15% 3. Forward Voltage: +/ -0.1V Note: Accuracy may depend on the sorting parameters. Hyper Red WP1703SURC
SPEC NO: DSAF2452 REV NO: V.1 DATE: APR/28/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: H.Q.YUAN ERP: 1101002433 PACKING & LABEL SPECIFICATIONS WP1703SURC