WP1553GDT KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
/G4FLOW POWER CONSUMPTION. /G4FWIDE VIEWING ANGLE. /G4FRELIABLE AND RUGGED. /G4FEXCELLENT UNIFORMITY OF LIGHT OUTPUT. /G4FIDEAL AS FLUSH MOUNTED PANEL INDICATORS. /G4FLONG LIFE -SOLID STATE RELIABILITY. /G4FRoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.
SPEC NO /GC1: DSAF2622 REV NO /GC1: V.1 DATE: APR/21/2005 PAGE: 2 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101002166 Selection Guide Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Part No. Dice Lens Type Iv (mcd) @ 10mA Viewing Angle Min. Typ. 2θ1/2 WP1553GDT GREEN (GaP) GREEN DIFFUSED 1 5 110° Symbol Parameter Device Typ. Max. Test ConditionsUnits λpeak Peak Wavelength Green 565 nm IF=20mA λD Dominant Wavelength Green 568 nm IF=20mA ∆λ 1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Parameter Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO /GC1: DSAF2622 REV NO /GC1: V.1 DATE: APR/21/2005 PAGE: 3 OF 3 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101002166 Green WP1553GDT Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.