WP1513GC KINGBRIGHT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

/G7ALOW POWER CONSUMPTION. /G7AVERSATILE MOUNTING ON P.C. BOARD OR PANEL. /G7AT-1 3/4 DIAMETER PACKAGE, TAPERED TYPE. /G7ARELIABLE AND RUGGED. /G7ARoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.

SPEC NO: DSAF2370 REV NO: V.1 DATE: APR/19/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101001743 Selection Guide Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA =25°C Absolute Maximum Ratings at TA =25°C Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Symbol Parameter Device Typ. Max. Test ConditionsUnits λpeak Peak Wavelength Green 565 nm IF=20mA λD Dominant Wavelength Green 568 nm IF=20mA ∆λ 1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Parameter Green Units Power dissipation 105 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Part No. Dice Lens Type Iv (mcd) @ 10mA Viewing Angle Min. Typ. 2 θ 1/2 WP1513GC GREEN (GaP) WATER CLEAR 18 50 20°

SPEC NO: DSAF2370 REV NO: V.1 DATE: APR/19/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101001743 Green WP1513GC

SPEC NO: DSAF2370 REV NO: V.1 DATE: APR/19/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1101001743 PACKING & LABEL SPECIFICATIONS WP1513GC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.