WP130WDT-EGW KINGBRIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
Features
z PRE-TRIMMED LEADS FOR PC BOARD MOUNTING. z 3 LEADS WITH COMMON CATHODE. z I.C. COMPATIBLE. z BLACK CASE ENHANCES CONTRAST RATIO. z UL RATING : 94V-0. z HOUSING MATERIAL: TYPE 66 NYLON. z RoHS COMPLIANT.
Description
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice.
SPEC NO: DSAF1530 REV NO: V.3 DATE: MAY/19/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102000189 Selection Guide Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25°C Electrical / Optical Characteristics at TA=25°C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 WP130WDT/EGW High Efficiency Red (GaAsP/GaP) WHITE DIFFUSED 7 30 Green (GaP) 7 25 60° Symbol Parameter Device Typ. Max. Units Test Conditions λpeak Peak Wavelength High Efficiency Red Green 627 565 nm IF=20mA λD [1] Dominant Wavelength High Efficiency Red Green 625 568 nm IF=20mA Δλ1/2 Spectral Line Half-width High Efficiency Red Green 30 nm IF=20mA C Capacitance High Efficiency Red Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red Green 2.2 2.5
2.5 V IF=20mA
IR Reverse Current High Efficiency Red Green 10 10 uA VR = 5V Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAF1530 REV NO: V.3 DATE: MAY/19/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102000189 WP130WDT/EGW High Efficiency Red
SPEC NO: DSAF1530 REV NO: V.3 DATE: MAY/19/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102000189 Green
SPEC NO: DSAF1530 REV NO: V.3 DATE: MAY/19/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1102000189 PACKING & LABEL SPECIFICATIONS WP130WDT/EGW