BMLPV900NGP PCTEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Features
- A ttractive, low-profile design for maximum overhead clearance
- I ndustry leading performance provides outstanding coverage across multiple frequency bands without a ground plane
- IP67 r ated for ingress protection against severe environmental conditions
- M ates with all 1-1/8”-18 thread mounts, including 3/4” mounts
- N F emale termination option available on select models (VP Option) No Ground Plane MLPV Low-Profile Vertical Antennas BMLPV900NGPVP ELECTRICAL SPECIFICATIONS Model Frequency Range Gain* VSWR Maximum Power Nominal Impedance Polarization BMLPV900NGP 902-928 MHz Unity < 2.0:1 100 watts 50 ohms Vertical, linear BMLPV2400NGP 2400-2500 MHz 3 dBi < 2.0:1 100 watts 50 ohms Vertical, linear BMLPVMBLTENGP 698-960 MHz / 1710-2700 MHz 3 dBi < 2.0:1 100 watts 50 ohms Vertical, linear WMLPVMBLTENGP 698-960 MHz / 1710-2700 MHz 3 dBi < 2.0:1 100 watts 50 ohms Vertical, linear Low-Profile Whipless Antennas MECHANICAL & ENVIRONMENTAL SPECIFICATIONS Model Dimensions Weight Housing Material Temperature Range Color Chrome Coil - Bushing ZINC Top Cover - ZINC DIECAST -40° C to +85°C Black BMLPVMBLTENGP STANDARD CONFIGURATION MLPV antennas mate with 1-1/8”-18 thread mounts, including 3/4” mounts (sold separately). For models operating at frequencies over 600 MHz, high frequency mounts are recommended: MLFML195C: High performance permanent mount 3/4” hole, 1-1/8”-18 thread interface. Includes 17 ft of Pro-Flex™ Plus 195 cable. Loose TNC male connector included. Optimized for frequencies over 600 MHz. Configurable. GMLFML195C: High performance magnetic mount 3-1/4” diameter base, 1-1/8”-18 thread interface. Includes 12 ft of Pro-Flex™ Plus 195 cable terminated with TNC male connector (attached). Optimized for frequencies over 600 MHz. Configurable. MTPM800: 5/8” hole, 1-1/8”-18 thread mount for surfaces up to 1/2-inch thick. Terminates in an N Female connector. No cable. Supports 24 MHz - 6 GHz. MVPHP: 5/8” hole, vandal proof mount. No cable. Supports 24 MHz - 6 GHz. Add suffix “VP” to the MLPV part number to have this mount permanently installed at the factory. VP option will not be removable from factory installed “VP” antennas. (example: BMLPV900VP .) MMF: 3/4” hole, 1-1/8”-18 mount. Terminates in an SMA, Male connector. No cable. Supports 24 MHz - 6 GHz. MMF-VP: 3/4” hole vandal-proof mount for frequencies from 0 GHz to 6 GHz. 1-1/8”-18 thread interface. Terminates in SMA, Male connector. No cable. Accommodates surfaces up to .09-inch thick. RoHS COMPLIANT