WMA-1201YZ ETC1 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

10-15Watts Single Output Wallmount adapter WMA series Date: Sep 19,2003 65 Feature: l 90 to 264Vac universal input range. l Meet UL/CUL ,TUV ,T-Mark. l EMI/RFI meet VDE & FCC limit B. l Low cost & compact size. l International AC Plug available. l 2 Year Warranty. Specifications: typical at nominal line, full load at 25°C. Input Specifications: General Specifications: Input voltage: 90 to 264Vac Efficiency: 65% typical at full load Input Frequency: 47 Hz to 63Hz Hold-up time: 10ms @ 115Vac full load EMI/RFI: VDE & FCC Class B limits Input inrush current: 20A at 115Vac 40A at 230Vac Earth leakage: 0.2mA max @ 115Vac 0.4mA max @ 230Vac Dielectric Withstand: Input/output: 3000Vac Input/Ground: 1500Vac Output Specifications: Output Rating: See Selection Table Output Voltage Accuracy : ± 5% max. ¬Safety Meet: UL/CUL UL60950 TUV EN60950 T-Mark. Line Regulation: ± 1% max Switching frequency: 50kHz Load Regulation: ± 5% max. (Full to half load) Weight: 170g MTBF: 100,000hours(MIL-HDBK-217F) Transient Response: ± 1% max.dev. (Full to half load) 1mS recovery Environmental Specifications: Temperature Coefficient: ± 0.04% / °C Operating temperature: 0 to +40°C Ripple & Noise: 2% P-P max. Storage temperature: -20 to +85°C Humidity: 5 to 95 % RH non-condensing Vibration: 2.4G , 5 to 500Hz Protections: a. Over current protection b. Over power protection c. Short circuit protection Cooling: Free air convection Note: 1. Vibration test: Three orthogonal axes, random vibration, 10 minutes for each axis. 2. Maximum output power is 15W. 3. Ripple & noise test method is measured at output terminal across a 0.1uF ceramic cap & a 10uF tantalum or electrolytic cap in parallel with a 20MHz bandwidth oscilloscope directly. ¬ Please refer the safety approval status on appendix 1, For latest safety approval status Please consult YCL or visit" www.ycl.com.tw

10-15Watts Single Output Wallmount adapter WMA series Date: Sep 19,2003 66 Model Selection Table: Model No. Output Voltage Output Current Minimum Output Current Maximum Max. Power WMA-1201 YZ 5V 0mA 2500mA 12.5W WMA-1005 YZ 3.3V 0mA 3000mA 10W ­ Others output voltage or output cord versions are available. Please consult factory for details. Dimensions: mm ± 1.0mm ¬ Order information: WMA-XXXXY Z Input Connector Type. DC output plugs type. Model No.

10-15Watts Single Output Wallmount adapter WMA series Date: Sep 19,2003 67 /JAPAN