DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 16

Technical content

SPE-12-8-117/B/SS Page 1 of 16 SPECIFICATION Part No. : WMA.01. 301151 Product Name : Trinity 3dBi 2.42.5GHz MIMO Antenna Wi-fi/ISM Bands/ZigBee/WLAN/Bluetooth Features : Connectors x 3 RP-SMA (M) – 3M RG-174 Omni-directional Flexible Mounting - Desktop - Wall mount - Magnet Mount - Adhesive Mount IEEE.802.11/IEEE.802.15 IP65 Water Resistant RoHS Compliant

SPE-12-8-117/B/SS Page 2 of 16 1. Introduction The Trinity MIMO antenna is a powerful 3*3 3dBi External 2.4GHz omni- directional antenna to enable high -speed data throughput. 3 individual high - gain elements ensure maximum coverage through diversity. Desk -top placement, magnet -mounting, wall-mounting, adhesive mounting are all options. The individual antennas can articulate horizontally and vertically for best signal reception depending on mounting conditions. Many module manufacturers specify peak gain limits for any antennas that are to be connected to that module. Those peak gain limits are based on free-space conditions. In practice, the peak gain of an antenna tested in free- space can degrade by at least 1 or 2dBi when put inside a device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the module specification to compensate for this effect, giving you better performance. Upon testing of any of our antennas with your devic e and a selection of appropriate layout, integration technique, or cable, Taoglas can make sure any of our antennas’ peak gain will be below the peak gain limits. Taoglas can then issue a specification and/or report for the selected antenna in your device that will clearly show it complying with the peak gain limits, so you can be assured you are meeting regulatory requirements for that module. For example, a module manufacturer may state that the antenna must have less than 2dBi peak gain, but you don’t n eed to select an embedded antenna that has a peak gain of less than 2dBi in free -space. This will give you a less optimized solution. It is better to go for a slightly higher free-space peak gain of 3dBi or more if available. Once that antenna gets integra ted into your device, performance will degrade below this 2dBi peak gain due to the effects of GND plane, surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas and we will test. Choosing a Taoglas antenna with a hig her peak gain than what is specified by the module manufacturer and enlisting our help will ensure you are getting the best performance possible without exceeding the peak gain limits. The cables are shipped bonded together for easy cable management. The standard connector option of RP -SMA plugs into AP router equipment. Other cable and connector options are available on request. DESKTOP / MAGNET MOUNT

SPE-12-8-117/B/SS Page 3 of 16 Standard Desktop and Magnet Mount Configuration Dipole Elements can be positioned Magnets on Base

SPE-12-8-117/B/SS Page 4 of 16 WALL MOUNT Standard Configuration Alternative Configuration Screw-Holes on Base for Easy Wall-Mounting (3M Adhesive can be supplied as option) 1. Screw - Cross Pan Head 2. Wall Plug - Plastic For Plastic Tapping Thread (ø3.5*16L)

SPE-12-8-117/B/SS Page 5 of 16 2. Electrical Specifications Parameter Specification Frequency Range 2.4~2.5GHz Impedance 50Ω VSWR 1.92:1 Max. Return Loss -10dB Max Radiation Pattern Omni Gain(Peak) 3dBi (excluding cable loss) Cable Loss 5.7dB Max. Polarization Linear; Vertical Power Handling 10W Cable RG-174 Coaxial cable Connector 3 x RP-SMA(M)

2.1 Mechanical Specifications

Base Dimensions 93mm Width * 105mm Length * 31mm Height Antenna Elements 132mm Length Antenna Body TPE Antenna Base PC Antenna Base PBT Operating Temperature -40°C to +85°C Storage Temperature -40°C to +85°C Color Black

SPE-12-8-117/B/SS Page 6 of 16 3. Technical Drawing

SPE-12-8-117/B/SS Page 7 of 16

3.1 Connector Drawing

SPE-12-8-117/B/SS Page 8 of 16 4. Performance Return Loss and Isolation of Left and Middle Antenna

SPE-12-8-117/B/SS Page 9 of 16 Return Loss and Isolation of Right and Middle Antenna

SPE-12-8-117/B/SS Page 10 of 16 Return Loss and Isolation of Left and Right Antenna

SPE-12-8-117/B/SS Page 11 of 16 Return Loss, Smith Chart and VSWR of Left Antenna

SPE-12-8-117/B/SS Page 12 of 16 Return Loss, Smith Chart and VSWR of Middle Antenna

SPE-12-8-117/B/SS Page 13 of 16 Return Loss, Smith Chart and VSWR of Right Antenna

SPE-12-8-117/B/SS Page 14 of 16 H-Plane Radiation Pattern of Left Antenna

SPE-12-8-117/B/SS Page 15 of 16 H-Plane Radiation Pattern of Middle Antenna

SPE-12-8-117/B/SS Page 16 of 16 H-Plane Radiation Pattern of Right Antenna