WLS15_V01 BANNER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

This guide is designed to help you set up and install the WLS15 LED Strip Light. For complete information on programming, performance, troubleshooting, dimensions, and accessories, please refer to the Instruction Manual at www.bannerengineering.com. Search for p/n 197493 to view the Instruction Manual. Use of this document assumes familiarity with pertinent industry standards and practices. For PWM dimming, use with the LC65P2T 2-wire dimmer module. For more information, refer to the LC65 LED Dimmer Module datasheet, p/n 177086. This module can only be used with the single color models. Single Color Models WLS15 C DW 0360 D S C2 Connector*ConstructionWindowLengthColorCascadableFamily C = Cascadable X = Non-cascadable DW = Daylight white WW = Warm white 0220 mm (6 in) 0360 mm (1 ft) 0500 mm (1.5 ft) 0640 mm (2 ft) 0920 mm (3 ft) 1200 mm (4 ft) D = Diffuse S = Sealed (IEC IP66, IEC IP67) C2 = 2 m (6.5 ft) integral PVC cable QP = 150 mm (5.9 in) PVC cable with M12/Euro-style quick disconnect QS = 150 mm (5.9 in) PVC cable with Deutsch DTM connector *Models with a quick disconnect or Deutsch DTM connector require a mating cordset Dual Color Models WLS15 C W 0360 D S C2 Connector*ConstructionWindowLengthColor 1CascadableFamily C = Cascadable X = Non-cascadable W = Daylight white B = Blue G = Green R = Red Y = Yellow A = Amber 0220 mm (6 in) 0360 mm (1 ft) 0500 mm (1.5 ft) 0640 mm (2 ft) 0920 mm (3 ft) 1200 mm (4 ft) D = Diffuse S = Sealed (IEC IP66, IEC IP67) C2 = 2 m (6.5 ft) integral PVC cable QP = 150 mm (5.9 in) PVC cable with M12/Euro-style quick disconnect *Models with a quick disconnect require a mating cordset R Color 2 Wiring Diagrams QP Models Male Female Pin Wire Color Single Color Models Dual Color Models 1 brown 12 V dc or 24 V dc Color 1: 12 V dc or 24 V dc 3 blue dc common dc common 4 black Not used Color 2: 12 V dc or 24 V dc (color 2 overrides color 1) 2 white Not used Not used QS Models: Single Color Models Only Male Female Pin Wire Color Connection 2 1 21 1 brown 12 V dc or 24 V dc 2 blue dc common WLS15 LED Strip Light Original Document 197492 Rev. F

15 February 2019

Supply Protection Circuitry Protected against reverse polarity and transient voltages Supply Voltage

12 V dc or 24 V dc nominal

Absolute operational limits of 10 V dc to 15 V dc and 20 V dc to 27 V dc Use only with a suitable Class 2 power supply (UL) or a SELV power supply (CE) Single Color Light Models can be PWM dimmed between 25% to 100% with a frequency up to 1000 Hz Spacing Citerion Vertical: 1.26 Horizontal: 1.26 Operating Temperature Storage Temperature Environmental Rating Rated IEC IP66 and IEC IP67 Suitable for wet locations per UL 2108 Vibration and Mechanical Shock Vibration: 10 Hz to 55 Hz, 1.0 mm peak-to-peak amplitude per IEC 60068-2-6 Shock: 15G 11 ms duration, half sine wave per IEC 60068-2-27 Construction Clear anodized aluminum housing; Polycarbonate outer housing, Polyamide end caps Supply Current Light Length Typical Current (A) at 25°C1 Max. Current (A) at -40°C

12 V dc 24 V dc 12 V dc 24 V dc

0220 mm 0.19 0.10 0.24 0.12 0360 mm 0.38 0.20 0.48 0.24 0500 mm 0.57 0.30 0.72 0.36 0640 mm 0.76 0.40 0.96 0.48 0920 mm 1.14 0.60 1.44 0.72 1200 mm 1.52 0.80 1.92 0.96 Connections 2 m (6.5 ft) integral PVC cable, 150 mm (6 in) PVC cable with a 4-pin M12/Euro-style quick disconnect, or 150 mm (5.9 in) 2-pin Deutsch DTM series sealed cable; models with a quick disconnect or Deutsch DTM connector require a mating cordset Do not spray cable with high-pressure sprayer or cable damage will result. Application Note When connecting cascadable lights in series, it is important not to exceed maximum current limitations:

  • Maximum length of light at 12 V dc: 2.4 m (7.9 ft)
  • Maximum length of light at 24 V dc: 6 m (19.7 ft) Mounting Integral mounting slots for M4 (#8) screws, tighten to 5 in·Ibf max torque Multiple bracket options available Secure cables within 150 mm (5.9 inches) of the light Certifications E476617 D Dimensions L1L2L3 Models L1 L2 L3 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. WLS15 LED Strip Light © Banner Engineering Corp. All rights reserved