WLP200 CALMIRCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- 6 Filters per device Ultra small footprint, 0.5mm pitch Silicon substrate 0.30mm Eutectic Solder Bumps Product Description The WLP200 consists of 6 RC filters with different filter characteristics in a wafer level package (WLP). All I/O pins are ESD protected for contact discharges up to 8KV per the IEC1000-4-2 level 4 specification. Two versions with different capacitor values are available. Cellular phone application frequently demands filtering of signals in the 800 to 2,700 MHz band. California Micro Devices’ unique thin film Flip Chip filters provide a minimum of –30 dB of attenuation over this frequency
Applications
EMI filter for Mobile Equipment (e.g. Cellular Phones) Evaluation Device C1460800 SCHEMATIC DIAGRAM band. The bump size and pitch of these filters are selected such that the device can be placed directly on a FR4 printed circuit board using conventional assembly techniques. Ground-bounce and cross-talk are mini- mized by a die design that provides eight solder bump contacts to the common supply connection. The solder bump contacts are a 63/37 Sn/Pb alloy and are nomi- nally 0.30 mm in diameter. R 50 Ω C GND R 50 Ω R 90 Ω C GND R 90 Ω R 70 Ω C GND R 70 Ω R 50 Ω C GND R 90 Ω C GND R 70 Ω C GND GND C3 B3 C2 B2 C5 B5 C4 B4 GND GND GND GND GND GND
©2000 California Micro Devices Corp. All rights reserved. Figure 2. WLP200 Package Diagram (View of the Bump side)
- Note 1: Calculated with zero Source impedance and infinite Load impedance.
- Note 2: Calculated with 50Ω Source impedance and 50Ω Load impedance.
© 2000 California Micro Devices Corp. All rights reserved. 11/10/2000 3 WLP200CALIFORNIA MICRO DEVICES 215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com Note 1: Human Body Model per MIL-STD-883, Method 3015 CDischarge = 100pF , RDischarge = 1.5KΩ, pins B2, C2, B3, C3, B4, C4, B5, C5 are at ground. ESD Contact Discharge from pins B1, A1, A2, A3, A4 and A5 one at a time. Note 2: Pins B2, C2, B3, C3, B4, C4, B5, C5 are grounded. ESD Contact Discharge between pins B1, A1, A2, A3, A4 and A5 and ground one at a time. Note 3: Standard IEC 1000-4-2 with CDischarge = 150pF , RDischarge = 330Ω, pins B2, C2, B3, C3, B4, C4, B5, C5 are at ground. SNOITACIFICEPSDSE )ngiseDybdeetnarauG(noitcetorPDSE NIMX AM )1etoN(5103dohteM,ledoMydoBnamuH,O/IynataegatloVegrahcsiDkaeP VK51– VK51 )3&2etoN(4leveL,2-4-0001CEI,noitcetorPmetsySnI VK8– VK8 )2&1setoN(ledoMydoBnamuH,sesluPDSEVK8@egatloVpmalClennahC V03– V03 SNOITADNEMMOCERDRAOBTIUCRICDETNIRP BCPnoeziSdaPm m572.0 epahSdaPd nuoR noitinifeDdaP )DMSN(sdaPdenifeDksaMredloSnoN gninepOksaMredloSm m523.0 ssenkcihTlicnetSredloSm m251.0 gninepOerutrepAlicnetSredloS) .qs(mm33.0 oitaRxulFredloS0 5/05 etsaPredloSnaelCoN hsiniFecarTdnoB )A601sulPuCketnE(PSO 250 225 200 175 150 125 100 0 48 97 145 Time (s) Temperature ( o 194 242 290 339 387 435 EXHRFZ5Z4EXH PH Z2 Z3 CD Typical Solder Reflow Thermal Profile (No Clean Flux)
©2000 California Micro Devices Corp. All rights reserved. 11/10/2000215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com4 WLP200CALIFORNIA MICRO DEVICES WLP200-01 Filter #4 D3-A3WLP200-01 Filter #3 D2-A2 S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –5.5407 dB 1.000 000 MHz 2: –8.542 dB
32.75 MHz
3: –13.941 dB
80 MHz
4: –32.441 dB
800 MHz
S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –8.8303 dB 1.000 000 MHz 2: –11.831 dB
18.5 MHz
3: –21.81 dB 4: –45.253 dB WLP200-01 FILTER CHARACTERISTICS (S21) MEASUREMENT NOTE: All the measurements are done with 50 Ω-source & 50Ω-load impedance using a HP8753C Network Analyzer with a HP85047A S-parameter Test Set. WLP200-01 Filter #1 C1-B1 S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –3.5204 dB 1.000 000 MHz 2: –6.5215 dB
36.03 MHz
3: –11.188 dB 4: –29.436 dB WLP200-01 Filter #2 D1-A1 S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –5.9489 dB 1.000 000 MHz 2: –8.9432 dB
25.461 MHz
3: –16.269 dB 4: –38.011 dB
© 2000 California Micro Devices Corp. All rights reserved. 11/10/2000 5 WLP200CALIFORNIA MICRO DEVICES 215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com WLP200-01 FILTER CHARACTERISTICS (S21) MEASUREMENT (Continued) NOTE: All the measurements are done with 50 Ω-source & 50Ω-load impedance using a HP8753C Network Analyzer with a HP85047A S-parameter Test Set. WLP200-01 Filter #6 D5-A5WLP200-01 Filter #5 D4-A4 S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –7.5079 dB 1.000 000 MHz 2: –10.504 dB
21.55 MHz
3: –19.2 dB 4: –41.775 dB S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –4.6323 dB 1.000 000 MHz 2: –7.625 dB
34.1 MHz
3: –12.677 dB 4: –29.358 dB
800 MHzWLP200-02 FILTER CHARACTERISTICS (S21) MEASUREMENT
NOTE: All the measurements are done with 50 Ω-source & 50Ω-load impedance using a HP8753C Network Analyzer with a HP85047A S-parameter Test Set. WLP200-02 Filter #2 D1-A1WLP200-02 Filter #1 C1-B1 S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –3.4364 dB 1.000 000 MHz 2: –6.44 dB
25.7 MHz
3: –13.557 dB 4: –31.79 dB S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –5.8804 dB 1.000 000 MHz 2: –8.8746 dB
18 MHz
3: –18.985 dB 4: –40.299 dB
©2000 California Micro Devices Corp. All rights reserved. 11/10/2000215 Topaz Street, Milpitas, California 95035 Tel: (408) 263-3214 Fax: (408) 263-7846 www.calmicro.com6 WLP200CALIFORNIA MICRO DEVICES WLP200-02 FILTER CHARACTERISTICS (S21) MEASUREMENT (Continued) NOTE: All the measurements are done with 50 Ω-source & 50Ω-load impedance using a HP8753C Network Analyzer with a HP85047A S-parameter Test Set. WLP200-02 Filter #6 D5-A5WLP200-02 Filter #5 D4-A4 S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –7.3998 dB 1.000 000 MHz 2: –10.4 dB
15.28 MHz
3: –16.318 dB
40 MHz
4: –36.504 dB
400 MHz
S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –4.5251 dB 1.000 000 MHz 2: –7.522 dB
24.351 MHz
3: –10.163 dB 4: –27.65 dB WLP200-02 Filter #4 D3-A3WLP200-02 Filter #3 D2-A2 S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –5.4737 dB 1.000 000 MHz 2: –8.478 dB
23.23 MHz
3: –11.423 dB 4: –29.674 dB S21 log MAG 5 dB/ REF 0 dB START .300 000 MHz STOP 3 000.000 000 MHz 1: –8.7223 dB 1.000 000 MHz 2: –11.74 dB
13.2 MHz
3: –16.641 dB
30 MHz
4: –36.565 dB