DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

FENG-JUI TECHNOLOGY CO., LTD WOUND INDUCTOR-RoHS Your Perfect Inductor Rev.1401 WL322522 TYPE

  • FEATURE 1. Wire wound SMD inductors 2. Highly accurate dimensions and reliable 3. WLC type are low DC resistance, high current for the power line
  • Applications 1. Digital camera or small size LCD panel used 2. Hard Disk drives, and other electronic equipment
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification Dimension in m/m TYPE B C D E F G I H Note1. Measurement frequency of Inductance value : at electrical characteristics Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. IDC : This indicates the value of current when the inductances is 10% lower than its initial Note4. Inductance tolerance: J: ±5% ; K: ±10% ; M: ±20% Note5. Ordering Code: TYPE NAME: WL322522 Main Inductance: 100 (10uH) T o l e r a n c e : K ( ± 1 0 % ) Note6.Packaging: Taping ; Quantity: 2000 Pieces/reel G I H

FENG-JUI TECHNOLOGY CO., LTD WOUND INDUCTOR-RoHS Your Perfect Inductor Rev.1401 P/N L (μH) TEST FREQ. (MHz) Q Min SRF (MHz) Min RDC (Ω)Max IDC (mA)Max WL322522-68N□ 0.068 100 27 1000 0.36 450 WL322522-82N□ 0.082 100 27 900 0.40 450 WL322522-R10□ 0.10 100 28 700 0.44 450 WL322522-R12□ 0.12 25.2 30 500 0.22 450 WL322522-R15□ 0.15 25.2 30 450 0.25 450 WL322522-R18□ 0.18 25.2 30 400 0.28 450 WL322522-R22□ 0.22 25.2 30 350 0.32 450 WL322522-R27□ 0.27 25.2 30 320 0.36 450 WL322522-R33□ 0.33 25.2 30 300 0.40 450 WL322522-R39□ 0.39 25.2 30 250 0.45 450 WL322522-R47□ 0.47 25.2 30 220 0.50 450 WL322522-R56□ 0.56 25.2 30 180 0.55 450 WL322522-R68□ 0.68 25.2 30 160 0.60 450 WL322522-R82□ 0.82 25.2 30 140 0.65 450 WL322522-1R0□ 1.0 7.96 30 120 0.70 400 WL322522-1R2□ 1.2 7.96 30 100 0.75 390 WL322522-1R5□ 1.5 7.96 30 85 0.85 370 WL322522-1R8□ 1.8 7.96 30 80 0.90 350 WL322522-2R2□ 2.2 7.96 30 75 1.00 320 WL322522-2R7□ 2.7 7.96 30 70 1.10 290 WL322522-3R3□ 3.3 7.96 30 60 1.20 260 WL322522-3R9□ 3.9 7.96 30 55 1.30 250 WL322522-4R7□ 4.7 7.96 30 50 1.50 220 WL322522-5R6□ 5.6 7.96 30 47 1.60 200 WL322522-6R8□ 6.8 7.96 30 43 1.80 180 WL322522-8R2□ 8.2 7.96 30 40 2.00 170 WL322522-100□ 10 2.52 30 36 2.10 150 WL322522-120□ 12 2.52 30 33 2.50 140 WL322522-150□ 15 2.52 30 28 2.80 130 WL322522-180□ 18 2.52 30 25 3.30 120 WL322522-220□ 22 2.52 30 23 3.70 110 WL322522-270□ 27 2.52 30 18 5.00 80 WL322522-330□ 33 2.52 30 17 5.60 70 WL322522-390□ 39 2.52 30 16 6.40 65 WL322522-470□ 47 2.52 30 15 7.00 60

FENG-JUI TECHNOLOGY CO., LTD WOUND INDUCTOR-RoHS Your Perfect Inductor Rev.1401 P/N L (μH) TEST FREQ. (MHz) Q Min SRF (MHz) Min RDC (Ω)Max IDC (mA)Max WL322522-560□ 56 2.52 30 13 8.00 55 WL322522-680□ 68 2.52 30 12 9.00 50 WL322522-101□ 100 0.796 20 10 11 40 WL322522-121□ 120 0.796 20 9 11 70 WL322522-151□ 150 0.796 20 7 15 65 WL322522-181□ 180 0.796 20 7 17 60 WL322522-221□ 220 0.796 20 6 21 50 WL322522-271□ 270 0.796 20 5 28 45 WL322522-331□ 330 0.796 20 5 34 40

FENG-JUI TECHNOLOGY CO., LTD WOUND INDUCTOR-RoHS Your Perfect Inductor Rev.1401 GENERAL CHARACTERISTICS 1. Operating temperature range -40 TO + 85 ℃(Includes temperature when the coil is heated) 2. External appearance On visual inspection, the coil has no external defects. 3. Terminal strength After soldering. Between copper plate and terminals of coil. Push in two directions of X.Ywithstanding at below conditions. Terminal should not peel off. (refer to figure at right) 4. Insulating resistance. Over 100MΩ at 100V D.C. between coil and core. 5. Dielectric strength No dielectric breakdown at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics Inductance coefficient (0~2,000)x10-6/℃(-25~+80℃). 7. Humidity characteristics Inductance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2℃ and 1 hour drying under normal condition. 8. Vibration resistance Inductance deviation within ±5%, after vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance Inductance deviation within ±5%, after being dropped once with 981m/s 2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260 , 10 seconds℃ 11. Storage environment Storage condition: Temperature Range: 10 ~ 35 (Generally: 21 ~ 31 )℃℃ ℃℃ Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) Transportation condition: Temperature Range: -35 ~ 85℃℃ Humidity Range: 50% ~ 95% RH

FENG-JUI TECHNOLOGY CO., LTD WOUND INDUCTOR-RoHS Your Perfect Inductor Rev.1401 RELIABILITY TEST