WKP VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Document Number: 22206 For technical questions, contact: slcap@vishay.com www.vishay.com Revision: 08-Feb-10 1 Ceramic AC Capacitors Class X1, 760 VAC/Class Y1, 500 VAC WKP Vishay Draloric Dimensions in mm Note Impedance (Z) as a function of frequency (f) at Ta = 20 °C (average). Measurement with lead length 6 mm. DESIGN Disc capacitors with epoxy coating RATED VOLTAGE UR (X1): 760 V AC, 50 Hz (IEC 60384-14.2) (Y1): 500 V AC, 50 Hz (IEC 60384-14.2) 250 VAC, 60 Hz (UL1414, CSA C22.2) DIELECTRIC STRENGTH BETWEEN LEADS Component test:
4000 VAC, 50 Hz, 2 s
As repeated test admissible only once with: 3600 V AC, 50 Hz, 2 s Random sampling test (destructive test):
4000 VAC, 50 Hz, 60 s
DIELECTRIC STRENGTH OF BODY INSULATION
4000 VAC, 50 Hz, 60 s (destructive test)
DISSIPATION FACTOR tan δ ≤ 25 x 10-3 INSULATION RESISTANCE RIS ≥ 10 x 109 Ω CATEGORY TEMPERATURE RANGE ϑA (- 40 to + 125) °C CLIMATIC CATEGORY ACC. TO EN60068-1 40/125/21 COATING Epoxy dipped, insulating, flame retarding acc. to UL 94V-0 TAPING AND SPECIAL LEAD CONFIGURATIONS On request MARKING WKP 33 pF to 1.5 nF WKP 2.2 nF to 4.7 nF Note All approval marks are also shown on the label. D Max. 3 Max. L = 30 - 3 or L = 10 ± 1 Ø d ± 0.005 F ± 1.0 S Max. V ± 0.5 2.2 nF 1.0 nF 3.3 nF 4.7 nF 470 pF 100 150 200 250 300 350 400 UR [V~] I~ [µA] 500 400 300 200 100 600 700 800 15 0 4700 pF 3900 3300 2200 1500 1000 680 470 330 220 150 100 33 pF 1 10 10-1 100 101 f Z [Ω] 100 I = f (UR) (typ.) [MHz] 10-2 300 WKP 3n3 M IEC 384-14/2 760 500 250 ~ X1 Y1 WKP 760 ~ X1 500 ~ Y1 47p M
Vishay Draloric Ceramic AC Capacitors Class X1, 760 VAC/Class Y1, 500 VAC www.vishay.com For technical questions, contact: slcap@vishay.com Document Number: 22206
2 Revision: 08-Feb-10
(1) Standard lead configuration, other lead spacing and diameter available on request. (2) Capacitance values from 470 pF to 4700 pF: The alternative usage of smaller VKP series is recommended for new application. ORDERING INFORMATION, CERAMIC X1/Y1 CAPACITORS WKP CAPACITANCE (2) (pF) TOL. (%) D x s (mm) F ± 1 (1) (mm) d ± 0.05 (1) (mm) V ± 0.5 (1) (mm) ORDERING CODE CLASS 1 N 750 CP KR CLASS 2 K 1200 CP KR
68 WKP680
220 WKP221
± 10 , ± 20 8.0 x 6.0 12.5 0.6 2.5 WKP331 CP KR
470 WKP471
680 9.0 x 6.0 WKP681 CP KR 1000 10.0 x 6.0 0.8 2.7 WKP102 CP KR 1500 12.0 x 6.0 WKP152 CP KR 2200 13.0 x 6.0 WKP222 CP KR 3300 15.0 x 6.0 WKP332 CP KR 3900 16.0 x 6.0 WKP392 CP KR 4700 18.0 x 6.0 WKP472 CP KR ORDERING CODE 7th digit Capacitance Tolerance: ± 10 % = K ± 20 % = M 10th to 12th digit Lead Configuration (see General Information) R1 4 th digit RoHS Compliant Component APPROVALS IEC 60384 - 14 / 2nd Issue (1993) incl. Am. 1 (1995) - Safety Tests EN 132 400 (1994) - Safety Tests THAT APPROVAL TOGETHER WITH THE CB TEST CERTIFICATE SUBSTITUTES THE NATIONAL APPROVAL OF THE FOLLOWING Belgium France Italy Austria China Japan Spain Denmark Greece Luxembourg P ortugal Singapore Poland United Germany Ireland Netherlands Sweden Slovenia Hungaria Czech Republic Finland Iceland Norway Switzerland Korea Israel Y1 - Capacitor: CB-Test Certificate: X1 - Capacitor: CB-Test Certificate: DE-1-11002-A1 DE-1-11002-A1 33 pF ... 4.7 nF 33 pF ... 4.7 nF 500 V AC
760 VAC
Minimum thickness of insulation: 0.4 mm UNDERWRITERS LABORATORIES INC. UL 1414 Agency Files / Licences E 183 844 V1 S1 CANADIAN STANDARDS ASSOCIATION NO 1-98 Agency Files / Licences E 183 844 V1 S1
ORDERING INFORMATION
SERIES CAP. VALUE TOLERANCE RATED VOLTAGE LEAD CONFIGURATION INTERNAL CODE ROHS COMPLIANT
www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.
Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: WKP332MCPSUTK WKP102MCPERUK WKP332MCPEJ0KR WKP221MCPEF0KR WKP152MCPEJ0KR WKP221KCPEF0K WKP221MCPEF0K WKP222MCPEJ0K WKP221MCPEJ0K WKP332MCPERUK WKP332MCPEJ0K WKP392MCPEJ0K WKP222MCPEJ0KR WKP102MCPSKNK WKP151MCPEJ0K WKP472MCPERUK WKP471MCPERUK WKP102MCPEJ0KR WKP151MCPEF0KR WKP471MCPEF0KR WKP221MCPEJ0KR WKP681MCPEF0K WKP471MCPERUKR WKP680MCPEF0K WKP680KCPEF0K WKP331MCPEF0K WKP330MCPEJ0K WKP472MCPEJ0K WKP152MCPEJ0K WKP152KCPEJ0K WKP102MCPEJ0K WKP101MCPEF0K WKP101KCPEF0K WKP102KCPEF0K WKP102MCPEF0K WKP470MCPEF0K WKP471MCPEF0K WKP681MCPEF0KR WKP330MCPEF0KR WKP331MCPEF0KR WKP101MCPEF0KR WKP472MCPEJ0KR WKP680MCPEF0KR WKP470MCPEF0KR WKP222MCPEF0KR