WF15-40B410 ETC2 | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

T WF next: Fork sensors for a wide range of applications D ATA S HEET The detection of labels, marks and double sheets, as well as holes and edges are typical appli- cations for the new WF fork sen- sors. A complete range of sensors with the following features is avail- able for a variety of operating conditions: I slot widths between 2 and 120mm, slot depths of 40, 60 and 95 mm, I manual adjustment via user- friendly keyboard, I simple and quick adjustment via Teach-in, I switching output PNPand NPN, I L/D adjustable via button, I rugged metal housing with glass optics, I shortest response time, I fine resolution. Fork sensors

2 SENSICK

Mounting holes, Ø 4.2 mm Function indicator (red) Function indicator (yellow), switching output “+”/“–” buttons and function button WF next Fork sensors, manual setting 1 L+ QP M Q N brn blk blu wht Simple and accurate adjust- ment via “+” and “–” buttons PNP and NPN switching output Light/dark switching, adjustable Rugged aluminium housing Accessories Cables and Connectors Fork width 2 ... 120 mm 51 0 B 6 10 A19 C – 3s – 6s Dimensional drawing 4-pin, M8 All types Fork sensors Connection types Adjustments possible 3 4 Dimensions Dimensions AB C (mm) Fork width Fork depth WF 2 2 42/59/95 14 WF 5 5 42/59/95 14 WF 15 15 42/59/95 27 WF 30 30 42/59/95 42 WF 50 50 42/59/95 40 WF 80 80 42/59/95 70 WF 120 120 42/59/95 110

Fork depth 40, 60 or 95 mm Light source LED, infra-red modulated Minimum detectable object size 0.2 mm Supply voltage UV 10 ... 30 V DC2) Current consumption3) 40 mA Residual ripple4) < 10 % Switching output PNP and NPN Light/dark adjustable via button Signal voltage PNP HIGH = U V – (< 2 V)/LOW = 0 V NPN HIGH = U V/LOW = < 2 V Output current IA 100 mA Stability of response time5) ±20 µs Response time5), switching frequency6) Max. 100 µs; 10,000/s Initialisation time 100 ms Ambient light safety Incandescent lamp 5,000 Lux Sunlight 10,000 Lux VDE protection class7) III Enclosure rating IP 65 Circuit protection8) A, B, C Ambient temperature9) Operation –20°C ... +60°C Storage –30°C ... +80°C Housing Aluminium Weight Approx. 36 g to 160 g10) 3SENSICK WF next, manual setting 1) XX = Fork depth (E.g. 40 = fork depth equivalent to 40 mm) 2) Limit values, reverse-polarity protected 3) Without load 4) May not exceed or fall short of VS-tolerances 5) Signal transit time with resistive load 6) With light/dark ratio 1:1; no time delay 7) Reference voltage 50 V DC 8) A = UV connections reverse-polarity protected B = Outputs short-circuit protected C = Interference pulse suppression 9) Do not bend below 0 °C 10) Depending on fork width Truth table Technical data WF 2-XX1) B410 5-XX1) B410 15-XX1) B410 30-XX1) B410 50-XX1) B410 80-XX1) B410 120-XX1) B410 WF2-40B410 WF5-40B410 WF15-40B410 6 028 428 Type Part no. Type Part no. Type Part no. 6 028 429 6 028 430 Switching type Light-switching (Q) Dark-switching (Q –) Light path free yes no yes no PNP/NPN output HIGH LOW LOW HIGH Function indicator(yellow)On Off Off On Fork depth 40 mm Fork depth 60 mm Fork depth 95 mm Order information

WF next Fork sensors, Teach-in SENSICK Optical axis Mounting holes, Ø 4.2 mm Function indicator (red) Function indicator (yellow), switching output “+”/“–” buttons and function button 1 L+ QP M Q N brn blk blu wht Simple setting using 2-point Teach-in PNP and NPN switching output Light/dark switching adjustable Rugged aluminium housing Accessories Cables and Connectors Fork width 2 ... 120 mm 51 0 B 6 10 A19 C – 1s TII 1s TI– – 3s – 6s Dimensional drawing 4-pin, M8 All types Fork sensors Connection types Adjustments possible 3 4 Dimensions Dimensions AB C (mm) Fork width Fork depth WF 2 2 42/59/95 14 WF 5 5 42/59/95 14 WF 15 15 42/59/95 27 WF 30 30 42/59/95 42 WF 50 50 42/59/95 40 WF 80 80 42/59/95 70 WF 120 120 42/59/95 110

WF next, Teach-in SENSICK WF120-95B416 6 028 470 WF80-95B416 6 028 469 WF50-95B416 6 028 468 WF30-95B416 6 028 467 WF2-95B416 WF5-95B416 WF15-95B416 6 028 464 6 028 465 6 028 466 WF120-60B416 6 028 463 WF80-60B416 6 028 462 WF50-60B416 6 028 461 WF30-60B416 6 028 460 WF2-60B416 WF5-60B416 WF15-60B416 6 028 457 6 028 458 6 028 459 WF120-40B416 6 028 456 WF80-40B416 6 028 455 WF50-40B416 6 028 454 WF30-40B416 6 028 453 Fork width 2 mm 5 mm 15 mm 30 mm 50 mm 80 mm 120 mm Fork depth 40, 60 or 95 mm Light source LED, infra-red modulated Minimum detectable object size 0.2 mm Supply voltage UV 10 ... 30 VDC 2) Current consumption3) 40 mA Ripple4) < 10 % Switching output PNP and NPN Light/dark adjustable via button Signal voltage PNP HIGH = U V – (< 2 V)/LOW = 0 V NPN HIGH = U V/LOW = < 2 V Output current IA 100 mA Stability of response time5) ±20 µs Response time5), switching frequency6) Max. 100 µs; 10,000/s Teach-in via button Initialisation time 100 ms Ambient light safety Incandescent lamp 5,000 Lux Sunlight 10,000 Lux VDE protection class7) III Enclosure rating IP 65 Circuit protection8) A, B, C Ambient temperature9) Operation –20°C ... +60°C Storage –30°C ... +80°C Housing Aluminium Weight Approx. 36 g to 160 g10) 1) XX = Fork depth (E.g. 40 = fork depth equivalent to 40 mm) 2) Limit values, reverse-polarity protected 3) Without load 4) May not exceed or fall short of VS-tolerances 5) Signal transit time with resistive load 6) With light/dark ratio 1:1; no time delay 7) Reference voltage 50 V DC 8) A = UV connections reverse-polarity protected B = Outputs short-circuit protected C = Interference pulse suppression 9) Do not bend below 0 °C 10) Depending on fork width Truth table Technical data WF 2-XX1) B416 5-XX1) B416 15-XX1) B416 30-XX1) B416 50-XX1) B416 80-XX1) B416 120-XX1) B416 WF2-40B416 WF5-40B416 WF15-40B416 6 028 450 Type Part no. Type Part no. Type Part no. 6 028 451 6 028 452 Switching type Light-switching (Q) Dark-switching (Q –) Light path free yes no yes no PNP/NPN output HIGH LOW LOW HIGH Function indicator(yellow)On Off Off On Fork depth 40 mm Fork depth 60 mm Fork depth 95 mm Order information

Description of 2-point Teach-in process SENSICK Teach-in: adjusting the switching threshold 1st operation 1 s red yellow – 1 s Following completion of the Teach-in operation, the switching threshold can be further adjusted by the “+” or “–” button at any time. For slower adjustment, press the “+” or “–” button once. For faster adjustment, the finger remains on the “+” or “–” button. By simultaneously pressing the “+” and “–” buttons (3 seconds), the unit can be locked against unintentional adjustment By simultaneously pressing the “+” and “–” buttons (6 seconds), the switching function (light/dark) can be inrated. Default setting: light switching. – 6s – 3s Operate both buttons for 1 sec (on mark or object). 2nd operation Notes Briefly operate the “–” button (on carrier material or without scanned object). After the first Teach-in operation, the red function indicator flashes slowly and signals that the second Teach-in operation must now be initiated. After the second Teach-in operation, the red function indicator extinguishes. The Teach-in operation was unsuccessful if the red function indicator flashes. The material speed during Teach-in must equal zero (machine stationary). red yellow

DOL-0804-W10M 6 010 755 10 m DOL-0804-W05M 6 009 873 5 m Type DOL-0804-W02M Part no. 6 009 871 Cable length 2 m DOL-0804-G10M 6 010 754 10 m DOL-0804-G05M 6 009 872 5 m Type DOL-0804-G02M Cables and Connectors SENSICK DOS-0804-W 6 009 975 Dimensional drawings and order information SENSICK screw-in system M8, 4-pin, enclosure rating IP 67 Type Part no. Type Part no. DOS-0804-G 6 009 974 Female connector M8, 4-pin, straight Part no. 6 009 870 Cable length 2 m Female connector M8, 4-pin, straight Cable diameter 5 mm, 4 x 0.25 mm2, sheath PVC Female connector M8, 4-pin, right angle Cable diameter 5 mm, 4 x 0.25 mm2, sheath PVC ø 11.6 M8x1 38.4 Cable diameter max. 5.0 mm 2/wht 1/brn 4/blk 3/blu ø 10 30.5 Rmin1) M 8x1 28.0 ø 11.6 M8x1 12.5 Cable diameter max. 5.0 mm 3/blu M 8x1 16.5 ø 10 Rmin1) 1/brn 4/blk 2/wht 1) Minimum bend radius in dynamic use Rmin = 20 x cable diameter Female connector M8, 4-pin, right angle

Contact: Australia Phone +61 3 9497 4100 1800 33 48 02 – tollfree E-Mail sales@sick.com.au Belgique/Luxembourg Phone +32 (0)2 466 55 66 E-Mail info@sick.be Brasil Phone +55 11 5091-4900 E-Mail sac@sick.com.br Ceská Republika Phone +420 2 57 91 18 50 E-Mail sick@sick.cz China Phone +852-2763 6966 E-Mail ghk@sick.com.hk Danmark Phone +45 45 82 64 00 E-Mail sick@sick.dk Deutschland Phone +49 (0)2 11 53 01-250 E-Mail vzdinfo@sick.de España Phone +34 93 480 31 00 E-Mail info@sick.es France Phone +33 1 64 62 35 00 E-Mail info@sick.fr Great Britain Phone +44 (0)1727 831121 E-Mail info@sick.co.uk Italia Phone +39 02 27 40 93 19 E-Mail ced@sick.it Japan Phone +81 (0)3 3358 1341 E-Mail info@sick.jp Korea Phone +82-2 786 6321/4 E-Mail kang@sickkorea.net Nederland Phone +31 (0)30 229 25 44 E-Mail info@sick.nl Norge Phone +47 67 81 50 00 E-Mail austefjord@sick.no Österreich Phone +43 (0)22 36 62 28 8-0 E-Mail office@sick.at Polska Phone +48 22 837 40 50 E-Mail info@sick.pl Schweiz Phone +41 41 619 29 39 E-Mail contact@sick.ch Singapore Phone +65 6744 3732 E-Mail admin@sicksgp.com.sg Suomi Phone +358-9-25 15 800 E-Mail sick@sick.fi Sverige Phone +46 8 680 64 50 E-Mail info@sick.se Taiwan Phone +886 2 2365-6292 E-Mail sickgrc@ms6.hinet.net USA/Canada/México Phone +1(952) 941-6780 1 800-325-7425 – tollfree E-Mail info@sickusa.com More representatives and agencies in all major industrial nations at www.sick.com SICK AG • Industrial Sensors • Waldkirch • Germany • www.sick.com 8 010 674/09-02-04 • GO/SM • Printed in Germany (04.04) • Subject to change without prior notice • The specified product features and technical data do not represent any guarantee • 01 DB int14