WA84F-15RJI WELWYN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Fusible Wirewound Resistors WA84F Series Predictable fusing characteristics Flameproof protection Suitable for pulse and fuse applications Fusible Wirewound Resistors WA84F

  • Predictable fusing characteristics
  • Flameproof protection
  • Suitable for pulse and fuse applications WA84F Power rating at 25°C watts 2.0 Power rating at 70°C watts 1.6 Resistance range ohms 0R2 to 30R Limiting element voltage volts 100 Isolation voltage volts 350 TCR (-55°C to 155°C) ppm/°C ≤1 Ω:350 >1 Ω:100 Resistance tolerance % 5 Values E24 preferred Thermal impedance °C/watt 90 Ambient temperature range °C - 55 to 155 General Note Welwyn Components reserves the right to make changes in product specification without notice or liability. All information is subject to Welwyn’s own data and is considered accurate at time of going to print. © Welwyn Components Limited · Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com Electrical Data Issue C · 04.03 A subsidiary of TT electronics plc Welwyn Components 170 Construction A high purity ceramic substrate is assembled with interference fit end caps to which are welded the termination wires. The resistive element is wound on the substrate and welded to the caps. Cement protection is applied to the resistor body before marking with indelible ink. Marking Resistors are colour coded with five bands. Four of the bands are used to indicate value and tolerance, with IEC62 colours being used. A fifth yellow band denotes fusibility. Solvent Resistance The body protection and marking are resistant to all normal industrial cleaning solvents suitable for printed circuits. Terminations Material Solder-coated copper wire Strength The terminations meet the requirements of IEC 68.2.21. Solderability The terminations meet the requirements of IEC 115-1, Clause 4. 17. 3. 2. Flammability The resistor coating will not burn under any condition of applied temperature or component overload. Dimensions (mm) and Weight (g) PCB Min mounting bend Type L max D max f min d nom centres radius Wt.nom Physical Data LD f d WA84F_C.qxd 28/4/03 10:51 am Page 1 Make Possible Resistors 07.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2)

© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com Issue C · 04.03 Welwyn Components 171 f1 f2 Body Location f 1 – f 2 ≤ 1.4 mm Packaging The standard method of packaging is taped in ammo packs. Can be provided on reels by request. The critical dimensions are shown in figure 2. Component wires will not protrude beyond the outside edge of the tapes. 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Multiple of rated power Fusing characteristics for constant voltage Max. time to fuse (seconds) for R20 to 30R 100.0 90.0 80.0 70.0 60.0 50.0 40.0 30.0 20.0 10.0 Multiple of rated power Fusing characteristics for constant current Max. time to fuse (seconds) for 2R1 to 30R for R20 to 2R 20 40 60 80 100 120 140 160 180 200 220 240 260 280 130 120 110 100 Temp °C WA84F Series Derating Curve % of Rated Power at 70 °C Figure 2 lacipyTmumixaM Load at rated power: 1000 hrs at 25 or 70°C ∆ 0.30.5%R Dry heat: 1000 hrs at 200°C ∆ 0.30.5%R C°572 ta orezC°52 ta rewop detar morf gnitareD Short term overload - 2.5 x rated power for 5 seconds ∆ 0.20.5%R Climatic ∆ 0.10.5%R Pulse handling Data available by request Performance Data WA84F_C.qxd 28/4/03 10:51 am Page 2 Ordering Procedure Example: WA84F at 15 ohms and 5% tolerance packed in a box of 1000 pieces W A 8 4 F – 1 5 R J I Type Value (use IEC62 code) Tolerance (use IEC62 code) J 5% Packing I Ammo 1000/box Standard Make Possible 07.14 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com