STP80NF06 STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Datasheet sections

  • 1 Electrical ratings
  • 2 Electrical characteristics
  • 2.1 Electrical characteristics (curves)
  • 3 Test circuit
  • 4 Package mechanical data
  • 5 Revision history

N-channel 60V - 0.0065Ω - 80A TO-220/D2PAK/TO-247 STripFET II™ Power MOSFET General features ■ Exceptional dv/dt capability ■ 100% avalanche tested ■ Low threshold drive

Description

This Power MOSFET is the latest development of STMicroelectronics unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.

Applications

■ Switching application Internal schematic diagram Type V DSS RDS(on) ID STB80NF06 60V <0.010 Ω 80A STP80NF06 60V <0.010 Ω 80A STW80NF06 60V <0.010 Ω 80A TO-220 D²PAK TO-247 Order codes Part number Marking Package Packaging STB80NF06T4 B80NF06 D²PAK Tape & reel STP80NF06 P80NF06 TO-220 Tube STW80NF06 W80NF06 TO-247 Tube

1 Electrical ratings

Table 1. Absolute maximum ratings

  1. Current limited by wire bonding
  2. Pulse width limited by safe operating area
  3. Starting T j= 25°C, ID= 40A, VDD=40V

Table 2. Thermal data

2 Electrical characteristics

Table 3. On/off states Table 4. Dynamic

  1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %

Table 5. Switching times

Table 6. Source drain diode

  1. Pulse width limited by safe operating area.
  2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %

2.1 Electrical characterist ics (curves)

Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance

3 Test circuit

Figure 13. Switching times test circuit for Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com

DIM. mm. inch A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L20 16.40 0.645 L30 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 TO-220 MECHANICAL DATA

DIM. mm. inch A 4.4 4.6 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.7 0.93 0.027 0.036 B2 1.14 1.7 0.044 0.067 C 0.45 0.6 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 0.368 D1 8 0.315 E 10 10.4 0.393 E1 8.5 0.334 G 4.88 5.28 0.192 0.208 L 15 15.85 0.590 0.625 L2 1.27 1.4 0.050 0.055 L3 1.4 1.75 0.055 0.068 M 2.4 3.2 0.094 0.126 R0 . 4 0 . 0 1 5 V2 0º 4º D2PAK MECHANICAL DATA

DIM. mm. inch A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 b2 3.0 3.40 0.118 0.134 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 0.620 e5 . 4 5 0 . 2 1 4 L 14.20 14.80 0.560 0.582 L1 3.70 4.30 0.14 0.17 L2 18.50 0.728 øP 3.55 3.65 0.140 0.143 øR 4.50 5.50 0.177 0.216 S5 . 5 0 0 . 2 1 6 TO-247 MECHANICAL DATA

5 Revision history

Table 7. Revision history