W33 TEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Combines on/off switch and circuit protection in a single unit.
- 2 to 20 amp ratings (<2A types available as special order).
- One or two pole sensing.
- Lighted or non-lighted rocker actuator in various colors.
- Convenient, snap-in mounting.
- Optional auxiliary switch available.
- Trip-free operation. Electrical Data @ 25°C Calibration: Breaker will continuously carry 100% of rated load. It may trip between 101% and 135%, but must trip at 135% within one hour at +25°C. Dielectric Strength: Over 2,000 volts RMS. Maximum Operating Voltages:50VDC; 250VAC to 400 Hz. Interrupt Capacity: 1 ,000 amps at 50VDC; 250VAC, 60 Hz. and 125/250VAC, 400 Hz. 1 ,500 amps at 125/250VAC, 60 Hz. Resettable Overload Capacity: Ten times rated current. Mechanical/Environmental Data T ermination: Poles 1&2: .250” (6.35mm) quick connect/solder terminals. Mounting: Snaps into panel from front. Actuator: Rocker or lighted rocker. Shock: 30g tested to IEC 68-2-27 , test Ea. Vibration: 8g tested to IEC 68-2-6, test Fc. Switch Endurance Cycling: 50,000 operations at rated load. 1 ,000 operations at 200% rated load. Agency Approvals W33 series is UL 1077 Recognized as Supplementary Protectors, File E69543, and CSA Accepted as Supplementary Protectors (Appliance Component Protectors), File LR15734. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.
P&B Dimensions are shown for reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Catalog 1308242 Issued 3-03 (PDF Rev. 9-05) Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. W33-S1N1Q-5 W33-S1N1Q-15 W33-S1N1Q-20 W33-S4B1Q-10 W33-S4B1Q-15 W33-T2N1Q-20 W33-T4B1Q-5 W33-T4B1Q-10 W33-T4B1Q-15 Outline Dimensions .850 (21 .59) 1 .724 (43.79) .980 (24.89) 1.12 0 (28.45) 1 .690 (42.93)1 .890 (48.01) .250 (6.35).412 (10.46) PANEL CLAMPING ARRANGEMENT ROCKER FITS .875 x 1 .750 (22.22 x 44.45) PANEL OPENING FROM .032” - .250”(.813mm - 6.35mm) THICK I POLE POLE LOAD SIDE LINE SIDE NEON - AC INCANDESCENT - DC Stock Items – Authorized distributors are more likely to stock the following items.
Ordering Information
T ypical Part No. B W 3 3 - S1N1Q - 2 0 1. Designator: W = Circuit breaker 2. Series Number: 33 = Two pole, rocker actuated 3. Circuit Function: S = Pole 1 – Switch only; Pole 2 – Series trip overload sensing. T = Poles 1 & 2 – Series trip overload sensing. SS = Same as S with auxiliary switch on pole 1 . TS = Same as T with auxiliary switch on pole 1 . D = 2 Pole switching. 4. Rocker Color: 5. Light (available only with White, Red, Amber and Smoke rocker colors): A = 24VDC (Incandescent). B = 120VAC (Neon with resistor). C = 240VAC (Neon with resistor). N = No light. 6. Marking: 1 = International I/O. 2 = Contrasting I/O stamp (white toggle with black stamp). 7 . T ermination: 8. Amp Rating: 2 5 7 10 12 15 16 20 Consult factory for availability of ratings <2A Schematic