W1G130-AA49-01 EBMPAPST | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
– Material: Wall ring: Plastic PP , fibreglass- reinforced; Blade:Plastic PA, fibreglass-reinforced – Number of blades: 7 – Direction of air flow: "V", exhaust over struts – Direction of rotation: Counter-clockwise, seen on rotor – Type of protection: IP 54 – Insulation class: "B" – Mounting position: Any – Condensate discharges: None – Mode of operation: Con. operation (S1) – Bearings: Maintenance-free ball bearings – Motor protection: Via electronics and TOP – Electrical connection: Plug-in connection on motor side – Protection class: II – Product conforming to standard: CE; EN 60335-1 – Approvals: VDE, UL, CSA, GOST are applied for – Speed: Using the programming unit, 2 speeds between n min and nmax can be programmed. Nominal data Type subject to alterations (1) Nominal data in operating point with maximum load and 115 or 230 VAC W1G130-AA49 -01 M1G 055-AI VAC Hz rpm W A Pa °C kg 1~ 115 50/60 3200 24 0,38 90 -30..+60 0,75 W1G130-AA25 -01 M1G 055-AI 1~ 230 50/60 3200 24 0,19 90 -30..+70 0,75 Curve Nominal voltage Frequency Speed/rpm (1) Max. input power(1) Max. current draw(1) Max. back pressure Perm. amb. temp. Mass Motor A B Energy-saving axial fans Ø 130 50 100 150 200 250 300 350 0 40 80 120 0,1 0,3 0,2 cfm qV pfs Pa in H2O m3/h 160 200 n max. = 3200 min-1 n min. = 1100 min-1n = 2800 min-1 Curves A 1 3200 3200 3200 3200 2800 2800 2800 2800 0,38 0,38 0,38 0,38 0,26 0,26 0,26 0,26 A A A A A A A A B 3200 3200 3200 3200 2800 2800 2800 2800 0,19 0,19 0,19 0,19 0,13 0,13 0,13 0,13 B B B B B B B B n rpm P e W LWA dB(A) I A Air performance measured as per: ISO 5801, Installation category A, in ebm-papst full nozzle and without protection against accidental contact Suction-side noise levels: L WA as per ISO 13347, LpA measured at 1 m distance to fan axis The acoustic values given are only valid under the measur- ment conditions listed and may vary depending on the installation situation. With any deviation to the stan- dard setup, the specific values have to be checked and re- viewed once installed or fitted! For detailed information see page 62 ff.
40±5 Ø172 ±0.5 Ø162 +0.1 -0.3 Ø151±0.5 58-1 55±0.3 10 10 Ø4.2 Ø4.2 1.5 1.5 A A A-A ±0.1 ±0.1 ❮ "V" – Electr. connection: L1 S black Speed selection Energy-saving motor / fan (ESM) Handheld Pro- grammer p. 41 Connection lead (total length 450 mm) is fitted ex works and can be detached. blue brown Mains supply voltage off on (L1 or N) n1 n2 N S Speed selection L1 or N