RWR_V01 VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
www.vishay.com Vishay Dale Revision: 15-Nov-17 1 Document Number: 30203 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Wirewound Resistors, Military/Established Reliability, MIL-PRF-39007 Qualified, Type RWR, Up to S Level, Axial Lead DESIGN SUPPORT TOOLS
FEATURES
- High temperature silicone coated
- Complete welded construction
- Qualified to MIL-PRF-39007
- Available in non-inductive styles (type N) with Ayrton-Perry winding for lowest reactive components
- “S” level failure rate available Note
- “Terminal Wire and Winding” type “W” and “Z” are not listed below but are available upon request. Please reference MIL-PRF-39007 QPL for approved “failure rate” and “resistance tolerance/ranges” Note
- RWR82S and RWR82N: Core consists of beryllium oxide ceramic Notes (1) Note that “W” and “Z” are not listed above but are available, see MIL-PRF-39007 QPL for available resistance values (2) Maximum order sizes apply for single lot date code package codes, please see table below click logo to get started Available Models STANDARD ELECTRICAL SPECIFICATIONS MILITARY MODEL VISHAY REFERENCE MODEL POWER RATING P25 °C W RESISTANCE RANGE RESISTANCE RANGE WEIGHT RWR81S EGS-1-80 1 0.499 to 1K 0.1 to 1K 0.21 RWR81N EGN-1-80 1 0.499 to 499 0.1 to 499 0.21 RWR82N EGN-2 1.5 0.499 to 649 0.1 to 649 0.23 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: RWR74S49R9FSB12 MIL TYPE (5 digits) TERMINAL WIRE AND WINDING (1 digit) RESISTANCE VALUE (4 digits) TOLERANCE CODE (1 digit) FAILURE RATE (1 digit) PACKAGING CODE (3 digits) RWR71 RWR74 RWR78 RWR80 RWR81 RWR82 RWR84 RWR89 S = solderable, inductive N = solderable, non-inductive W = weldable, inductive (1) Z = weldable, non-inductive (1) 3 digit significant figure, followed by a multiplier 49R9 = 49.9 1000 = 100 1001 = 1000 B = ± 0.1 % D = ± 0.5 % F = ± 1.0 % M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h B12 = bulk pack S70 = tape/reel (smaller than 5 W) S73 = tape/reel (500 pieces) BSL (2) = bulk pack, single lot date code RSL (2) = tape/reel, single lot date code 74S4 R9F 9WR SB1R 2
www.vishay.com Vishay Dale Revision: 15-Nov-17 2 Document Number: 30203 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in inches [millimeters] Note (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown MAXIMUM ORDER SIZE FOR SINGLE LOT DATE CODE PACKAGE CODES MODEL MAXIMUM ORDER SIZE (PIECES) RWR81 1000 RWR82 1000 RWR80 1000 RWR71 500 RWR89 1000 RWR74 500 RWR84 300 RWR78 300 MILITARY MODEL DIMENSIONS in inches [millimeters] AB C TECHNICAL SPECIFICATIONS PARAMETER UNIT RWR RESISTOR CHARACTERISTICS Dielectric Withstanding Voltage V AC 500 minimum for 2 W and smaller, 1000 minimum for 3 W and larger Short Time Overload - 5x rated power for 5 s for 3 W size and smaller, 10x rated power for 5 s for 5 W size and greater Maximum Working Voltage V ( P x R)1/2 Insulation Resistance . 1000 M minimum dry, 100 M minimum after moisture test Terminal Strength lb 5 minimum for 2 W an d smaller, 10 minimum for 3 W and larger Solderability - Meets requir ements of ANSI J-STD-002 Operating Temperature Range °C -55 to +250 RESISTANCE TEMPERATURE COEFFICIENT TEMPERATURE COEFFICIENT (ppm/°C) RWR71 RWR74 RWR78 RWR80 RWR81 RWR82 RWR84 RWR89 RESISTANCE RANGE () RESISTANCE RANGE () RESISTANCE RANGE () RESISTANCE RANGE () RESISTANCE RANGE () RESISTANCE RANGE () RESISTANCE RANGE () RESISTANCE RANGE () ± 20 74.1 and above 160 and above 459 and above 10.1 and above 10.1 and above 10.1 and above 160 and above 42.7 and above B 1.50 [38.10] (1) min.A C
www.vishay.com Vishay Dale Revision: 15-Nov-17 3 Document Number: 30203 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MATERIAL SPECIFICATIONS Element: copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: ceramic, beryllium oxide (1), steatite or alumina, depending on power requirement Coating: special high temperature silicone Terminal and Winding: the terminal and the winding are identified by a letter symbol in the military type designation. Military symbol: S = solderable, inductively wound W = weldable, inductively wound N = solderable, non-inductively wound Z = weldable, non-inductively wound Terminals: solderable - Tinned Copperweld Weldable - bare nickel per MIL-STD-1276, Type N-1 End Caps: stainless steel Part Marking: source code, JAN, military PIN, date/lot code Note (1) RWR82S and RWR82N: Core co nsists of beryllium oxide ceramic DERATING Note (1) For resistance values above 100 , test limit is ± 1.0 % AMBIENT TEMPERATURE IN °C RATED POWER IN % 100 120 - 65 - 50 0 50 150 250 PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock MIL-STD-202, method 107 ± (0.2 % + 0.005 ) R Short Time Overload 5x rated power (RWR71, RWR80, RWR81, RWR89, RWR82), 10 x rated power (RWR74, RWR78, RWR84) for 5 s ± (0.2 % + 0.005 ) R Dielectric Withstanding Voltage 500 V RMS (RWR80, RWR81, RWR82), 1000 VRMS (RWR71, RWR74, RWR78, RWR84, RWR89), 1 min duration ± (0.1 % + 0.005 ) R Low Temperature Storage -55 °C for 24 h ± (0.1 % + 0.005 ) R High Temperature Exposure 250 °C for 2000 h ± (1.0 % + 0.005 ) R (1) Moisture Resistance MIL-STD-202, method 106 ± (0.2 % + 0.005 ) R Shock, Specified Pulse MIL-STD-202, method 213, condition I ± (0.1 % + 0.005 ) R Vibration, High Frequency MIL-STD-202, method 204, condition D ± (0.1 % + 0.005 ) R Load Life 2000 h at rated po wer, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (0.5 % + 0.005 ) R Extended Life 10 000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.005 ) R Terminal Strength MIL-STD-202, method 211, condition A and C 5 pound (RWR80, RWR81, RWR82), 10 pound (RWR71, RWR74, RWR78, RWR84, RWR89)
www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED