W0805

PFC TTELEC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Standard 60/40 Sn/Pb and Pb-free (RoHS compliant) terminations available Available in 0402, 0603, 0805 and 1206 Tested for COTS applications Absolute TCR to ±10ppm/°C MIL screening available Superior anti-sulfuration characteristics IRC Advanced Film Division General Note IRC reserves the right to make changes in product speci/f_ication without notice or liability . All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: afdsales@irctt.com • Website: www.irctt.com PFC Series Issue August 2011 Sheet 1 of 4 Non-leaching Nickel barrier Wrap around termination Ultra stable Tantalum Nitride resistor film system Precision Thin Film Chip Resistors PFC Series

• Standard 60/40 Sn/Pb and Pb-free (RoHS compliant) terminations available
• Available in 0402, 0603, 0805 and 1206
• Tested for COTS applications
• Absolute TCR to ±10ppm/°C MIL screening available Superior anti-sulfuration characteristics The TaNFilm ® PFC chip resistor series provides the high precision and ultra stable performance of our Tantalum Nitride resistive film system in 0402, 0603, 0805 and 1206 sizes. The unique characteristics of the passivated Tantalum Nitride film ensure long term life stability and reliability in most environments. Qualified for resistance to sulfur bearing gases, the PFC series is an excellent solution for automotive and heavy equipment applications where precision, exceptional reliability with anti-sulfuration characteristics is imperative. Electrical Data Model Power Rating (70°C) Max Voltage Rating ( P x R) Temperature Range ESD Sensitivity Noise Termination Substrate W0402 50mW 75V -65°C to +150°C 2KV to 4KV (HBM) <-25dB 100% matte tin (RoHS compliant) plated over nickel barrier 99.5% Alumina W0603 100mW 75V W0805 250mW 100V W1206 333mW 200V Environmental Test Test Method Performance Typical Maximum Sulfuration Test (ASLF terminations only) ASTM B-809 (Modified) 105°C Dry, 1000 Hours ±0.02% ±0.05% Thermal Shock MIL-PRF-55342 ±0.02% ±0.10% Low Temperature Operation MIL-PRF-55342 ±0.01% ±0.05% Short Time Overload MIL-PRF-55342 ±0.01% ±0.05% High Temperature Exposure MIL-PRF-55342 ±0.03% ±0.10% Effects of Solder MIL-PRF-55342 ±0.01% ±0.10% Moisture Resistance MIL-PRF-55342 ±0.03% ±0.10% Life MIL-PRF-55342 ±0.03% ±0.10% Environmental Data Using the same manufacturing line as the PFC Military Series, these precision chips maintain the same superior environmental performance. Specially selected materials and processes insure initial precision is maintained in the harshest surface mount soldering environment. Wrap-around terminations with leach-resistant nickel barriers insure high integrity solder connections. Resistors 04.16 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2) BI Technologies IRC Welwyn

PFC Series IRC Advanced Film Division PFC Series Issue August 2011 Sheet 2 of 4

• Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: afdsales@irctt.com • Website: www.irctt.com Precision Thin Film Chip Resistors Manufacturing Capabilities Data ±25 ppm/°C ±50 or ±100 ppm/°C W1206 5Ω 10Ω 50Ω 100Ω 200Ω 400KΩ 650KΩ 1.0MΩ W0805 5Ω 10Ω 50Ω 100Ω 200Ω 100KΩ 180KΩ 267KΩ Resistance Range ±15 ppm/°C ±10 ppm/°C 30KW0402 50Ω W0603 5Ω 10Ω 50Ω 100Ω 200Ω 50KΩ 75KΩ 100KΩ Tolerance Resistance Range TCR TCR Tolerance ±25, ±50 or ±100 ppm/°C Ω W0402 W0603 W0805 W1206 7.5Ω 5 Ω 5 Ω 5 Ω 10Ω 10Ω 10Ω 10Ω 50Ω 50Ω 50Ω 50Ω 100Ω 100Ω 100Ω 100Ω 16KΩ 50KΩ 100KΩ 400KΩ 24KΩ 75KΩ 180KΩ 650KΩ 30KΩ 100KΩ 267KΩ 1.0MΩ Resistance Range TCR ±50 or ±100 ppm/°C ±25 ppm/°C ±15 ppm/°C ±10 ppm/°C IRC Advanced Film Division PFC Series Issue August 2011 Sheet 3 of 4• Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: afdsales@irctt.com • Website: www.irctt.com Environmental Test MIL-PRF-55342 Maximum R per Characteristic E Performance Typical Maximum Thermal Shock ±0.10% ±0.02% ±0.10% Low Temperature Operation ±0.10% ±0.01% ±0.05% Short Time Overload ±0.10% ±0.01% ±0.05% High Temperature Exposure ±0.10% ±0.03% ±0.10% Effects of Solder ±0.20% ±0.01% ±0.10% Moisture Resistance ±0.20% ±0.03% ±0.10% Environmental Data Power Derating Curve Precision Thin Film Chip Resistors Temperature ( °C) % Of Rated Power IRC Advanced Film Division PFC Series Issue August 2011 Sheet 4 of 4
• Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: afdsales@irctt.com • Website: www.irctt.com L a W H b TO P SIDEBOTTOM Model L W H a b W0402 W0603 0.04 ±0.002 (1.02 ±0.05) 0.021 ±0.002 (0.53 ±0.05) 0.012 ±0.003 (0.3 ±0.08) 0.02 ±0.004 (0.51 ±0.1) 0.02 ±0.006 (0.51 ±0.15) 0.024 ±0.004 (0.61 ±0.1) 0.008 ±0.002 (0.2 ±0.05) 0.012 ±0.005 (0.3 ±0.13) 0.015 ±0.008 (0.38 ±0.2) 0.025 ±0.01 (0.64 ±0.25) 0.01 ±0.002 (0.25 ±0.05) 0.015 ±0.005 (0.38 ±0.13) 0.016 ±0.008 (0.41 ±0.2) 0.025 ±0.01 (0.64 ±0.25) 0.031 ±0.004 (0.79 ±0.1) 0.05 ±0.005 (1.27 ±0.13) 0.063 ±0.005 (1.6 ±0.13) 0.063 ±0.004 (1.6 ±0.1) 0.081 ±0.005 (2.06 ±0.13) 0.126 ±0.006 (3.2 ±0.15) W0805 W1206 Physical Data IRC’s PFC chip resistors are available with MIL screening. These chips are manufactured on the same production line as our Mil- qualified chip resistors and screened in accordance with MIL-PRF-55342. These chips are identified with IRC’s ordering information and not with MIL marking. MIL Screened Precision Chip Resistors Precision Thin Film Chip Resistors IRC Advanced Film Division PFC Series Issue August 2011 Sheet 4 of 4
• Corpus Christi Texas 78411 USA© IRC Advanced Film Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: afdsales@irctt.com • Website: www.irctt.com L a W H b TO P SIDEBOTTOM Model L W H a b W0402 W0603 0.04 ±0.002 (1.02 ±0.05) 0.021 ±0.002 (0.53 ±0.05) 0.012 ±0.003 (0.3 ±0.08) 0.02 ±0.004 (0.51 ±0.1) 0.02 ±0.006 (0.51 ±0.15) 0.024 ±0.004 (0.61 ±0.1) 0.008 ±0.002 (0.2 ±0.05) 0.012 ±0.005 (0.3 ±0.13) 0.015 ±0.008 (0.38 ±0.2) 0.025 ±0.01 (0.64 ±0.25) 0.01 ±0.002 (0.25 ±0.05) 0.015 ±0.005 (0.38 ±0.13) 0.016 ±0.008 (0.41 ±0.2) 0.025 ±0.01 (0.64 ±0.25) 0.031 ±0.004 (0.79 ±0.1) 0.05 ±0.005 (1.27 ±0.13) 0.063 ±0.005 (1.6 ±0.13) 0.063 ±0.004 (1.6 ±0.1) 0.081 ±0.005 (2.06 ±0.13) 0.126 ±0.006 (3.2 ±0.15) W0805 W1206 Physical Data IRC’s PFC chip resistors are available with MIL screening. These chips are manufactured on the same production line as our Mil- qualified chip resistors and screened in accordance with MIL-PRF-55342. These chips are identified with IRC’s ordering information and not with MIL marking. MIL Screened Precision Chip Resistors Precision Thin Film Chip Resistors Power Derating Curve 04.16 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com BI Technologies IRC Welwyn

This product has two valid part numbers: European (Welwyn) Part Number: W1206R-01-1K0BI (1206, 100ppm/°C, 1 kilohm ±0.1%, Pb-fre Pb-free W 1 2 0 6 R - 0 1 - 1 K 0 B I 1 2 3 4 5 6 USA (IRC) Commercial Part Number: PFC-W1206LF-01-1001-B (1206, 100ppm/°C, 1 kilohm ±0.1%, ) P F C - W 1 2 0 6 L F - 0 1 - 1 0 0 1 - B 1 2 3 4 5 6 Dimensions in inches (mm) Model L W H a b W0402 0.04 ±0.002 (1.02 ±0.05) 0.021 ±0.002 (0.53 ±0.05) 0.012 ±0.003 (0.3 ±0.08) 0.008 ±0.002 (0.2 ±0.05) 0.01 ±0.002 (0.25 ±0.05) W0603 0.063 ±0.004 (1.6 ±0.1) 0.031 ±0.004 (0.79 ±0.1) 0.02 ±0.004 (0.51 ±0.1) 0.012 ±0.005 (0.3 ±0.13) 0.015 ±0.005 (0.38 ±0.13) W0805 0.081 ±0.005 (2.06 ±0.13) 0.05 ±0.005 (1.27 ±0.13) 0.02 ±0.006 (0.51 ±0.15) 0.015 ±0.008 (0.38 ±0.2) 0.016 ±0.008 (0.41 ±0.2) W1206 0.126 ±0.006 (3.2 ±0.15) 0.063 ±0.005 (1.6 ±0.13) 0.024 ±0.004 (0.61 ±0.1) 0.025 ±0.01 (0.64 ±0.25) 0.025 ±0.01 (0.64 ±0.25) 1 2 3 4 5 6 Type Size TCR Value Tolerance Termination & Packing W=PFC 0402 R-12 = ±10ppm/°C E24 = 3/4 characters E96 = 3/4 characters R = ohms K = kilohms M = megohms Q = ±0.02% I = Pb-free, Standard pack 0603 R-11 = ±15ppm/°C A = ±0.05% PB = SnPb finish, Standard pack 0805 R = ±25ppm/°C B = ±0.1% All sizes 1000/reel G = ±2% J = ±5% 1 2 3 4 5 6 Family Model Termination TCR Value Tolerance Packing PFC W0402 R = SnPb (60/40) 12 = ±10ppm/°C 3 digits + multiplier Q = ±0.02% All sizes 1000/reel W0603 LF = Pb-free (100%Sn) 11 = ±15ppm/°C R = ohms for values <100 ohms A = ±0.05% W0805 ASLF = Anti-sulfur & Pb-free (100%Sn) G = ±2% J = ±5% Physical Data Ordering Procedure This product has two valid part numbers: European (Welwyn) Part Number: W1206R-01-1K0BI (1206, 100ppm/°C, 1 kilohm ±0.1%, Pb-fre Pb-free W 1 2 0 6 R - 0 1 - 1 K 0 B I 1 2 3 4 5 6 USA (IRC) Commercial Part Number: PFC-W1206LF-01-1001-B (1206, 100ppm/°C, 1 kilohm ±0.1%, ) P F C - W 1 2 0 6 L F - 0 1 - 1 0 0 1 - B 1 2 3 4 5 6 Dimensions in inches (mm) Model L W H a b W0402 0.04 ±0.002 (1.02 ±0.05) 0.021 ±0.002 (0.53 ±0.05) 0.012 ±0.003 (0.3 ±0.08) 0.008 ±0.002 (0.2 ±0.05) 0.01 ±0.002 (0.25 ±0.05) W0603 0.063 ±0.004 (1.6 ±0.1) 0.031 ±0.004 (0.79 ±0.1) 0.02 ±0.004 (0.51 ±0.1) 0.012 ±0.005 (0.3 ±0.13) 0.015 ±0.005 (0.38 ±0.13) W0805 0.081 ±0.005 (2.06 ±0.13) 0.05 ±0.005 (1.27 ±0.13) 0.02 ±0.006 (0.51 ±0.15) 0.015 ±0.008 (0.38 ±0.2) 0.016 ±0.008 (0.41 ±0.2) W1206 0.126 ±0.006 (3.2 ±0.15) 0.063 ±0.005 (1.6 ±0.13) 0.024 ±0.004 (0.61 ±0.1) 0.025 ±0.01 (0.64 ±0.25) 0.025 ±0.01 (0.64 ±0.25) 1 2 3 4 5 6 Type Size TCR Value Tolerance Termination & Packing W=PFC 0402 R-12 = ±10ppm/°C E24 = 3/4 characters E96 = 3/4 characters R = ohms K = kilohms M = megohms Q = ±0.02% I = Pb-free, Standard pack 0603 R-11 = ±15ppm/°C A = ±0.05% PB = SnPb finish, Standard pack 0805 R = ±25ppm/°C B = ±0.1% All sizes 1000/reel G = ±2% J = ±5% 1 2 3 4 5 6 Family Model Termination TCR Value Tolerance Packing PFC W0402 R = SnPb (60/40) 12 = ±10ppm/°C 3 digits + multiplier Q = ±0.02% All sizes 1000/reel W0603 LF = Pb-free (100%Sn) 11 = ±15ppm/°C R = ohms for values <100 ohms A = ±0.05% W0805 ASLF = Anti-sulfur & Pb-free (100%Sn) G = ±2% J = ±5% USA (IRC) Mil Screened Part Number*: PFC-W1206R-05-1001-B (1206, 100ppm/°C, 1 kilohm ±0.1%,) P F C - W 1 2 0 6 R - 0 5 - 1 0 0 1 - B 1 2 3 4 5 6 * Please refer to the PFC Military datasheet to order parts qualified to MIL-PRF-55342. 1 2 3 4 5 6 Family Model Termination TCR Value Tolerance Packing PFC W0402 R = SnPb (60/40) 16 = ±10ppm/°C 3 digits + multiplier All sizes 1000/reel W0603 15 = ±15ppm/°C R = ohms for values <100 ohmsW0805 14 = ±20ppm/°C B = ±0.1% W1206 07 = ±25ppm/°C D = ±0.5% 06 = ±50ppm/°C F = ±1% 05 = ±100ppm/°C G = ±2% 04 = ±300ppm/°C J = ±5% USA (IRC) Mil Screened Part Number*: PFC-W1206R-05-1001-B (1206, 100ppm/°C, 1 kilohm ±0.1%,) P F C - W 1 2 0 6 R - 0 5 - 1 0 0 1 - B 1 2 3 4 5 6 * Please refer to the PFC Military datasheet to order parts qualified to MIL-PRF-55342. 1 2 3 4 5 6 Family Model Termination TCR Value Tolerance Packing PFC W0402 R = SnPb (60/40) 16 = ±10ppm/°C 3 digits + multiplier All sizes 1000/reel W0603 15 = ±15ppm/°C R = ohms for values <100 ohmsW0805 14 = ±20ppm/°C B = ±0.1% W1206 07 = ±25ppm/°C D = ±0.5% 06 = ±50ppm/°C F = ±1% 05 = ±100ppm/°C G = ±2% 04 = ±300ppm/°C J = ±5% 04.16 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc www.ttelectronicsresistors.com BI Technologies IRC Welwyn