W005M DAESAN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Glass Passivated Die Construction
  • Diffused Junction
  • Low Forward Voltage Drop, High Current Capability
  • Surge Overload Rating to 50A Peak
  • Ideal for Printed Circuit Boards
  • Case to Terminal Isolation Voltage 1500V
  • Plastic Material - UL Flammability Classification Rating 94V-0 Maximum Ratings And Electrical Characteristics
  • Case : WOB, Molded Plastic
  • Terminals : Plated Leads Solderable per MIL-STD-202, Method 208
  • Polarity : As Marked on Body
  • Weight : 1.3 grams (approx.)
  • Mounting Position : Any
  • Marking : Type Number (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 1.5 Amperes VOLTAGE 50 to 1000 Volts WOB Dim Min Max A 8.84 9.86 B 4.00 4.60 C 27.90 D 25.40 E 0.71 0.81 G 4.60 5.60 A ll Dimens ions in mm Notes: (1) Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC. (2) Thermal Resistance from junction to case mounted on PC board with 13 x 13mm (0.03mm thick) land areas. Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @ TA=25 Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) VoltsForward Voltage (per element) @ IF=1.5 A VRMM VRWM VR

50 Volts

1.0VFM VRMS 1.5 Amps Amps 50IFSM Tj TSTG 500 -65 to +150 ¡É Peak Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance (Note 1) Operating and Storage Temperature Range W005M W01M W02M W04M W06M W08M W10M 5.0 100 200 140 400 280 600 420 800 560 1000

700 Volts

¥ìA ¡É/W pF Io IRM Cj R¥èJA @ TA=25¡É @ TA=125¡É Typical Thermal Resistance, Junction to Case (Note 2) 84 A B D E G G C + -

0.01 0.1 1.0 0.2 0.6 1.0 1.4 I , INST ANT ANEOUS FOR WARD CURRENT (A)F V , INST ANT ANEOUS FOR WARD VOL TAGE (V) Fi g. 2 Typical Forward Characteristics F T = 25°C Pulse width = 300µs j 1 10 100 I , PEAK FOR WARD SURGE CURRENT (A)FSM NUMBER OF CYCLES AT 60 Hz Fi g. 3 Max Non-Repetitive Sur ge Current Pulse Width 8.3 ms Single Half-Sine-W ave (JEDEC Method) 100 1 10 100 C , JUNCTION CAP ACIT ANCE (pF)j V , REVERSE VOL TAGE (V) Fi g. 4 Typical Junction Capacitance R T = 25°C f = 1mz j 0.01 0.1 1.0 100 200 0 40 80 160 I , INST ANT ANE OUS REVERSE CURRENT (µA)R PERCENT OF RA TED PEAK REVERSE VOL TAGE (% ) Fig. 5 Typical Reverse Characteristics 120 T = 100°Cj T = 25°Cj 0.5 1.0 1.5 0 25 50 100 125 15075 I , AVERAGE FOR WARD CURRENT (A)F T , AMBIENT TEMPERA TURE (°C) Fi g. 1 Forward Current Deratin g Curve A Single phase half-sine-wave 60Hz resistive or inductive load RATING AND CHARACTERISTIC CURVES W005M THRU W10M