VZH YSTONE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. CHIP TYPE Aluminum Electolytic Capacitors VZH Chip Type, 105ºC Low Impedance, Large Capacitance Capacitors 4 ~ 18, 105℃, 2,000 ~ 5,000 hours assured. Large capacitance with ultra low impedance capacitors. Designed for surface mounting on high density PC board. ■ SPECIFICATIONS Item Performance Category Temperature Range 55℃~+105℃ Capacitance Tolerance 20% (20℃, 120Hz) Leakage Current (A) I = 0.01CV or 3 (A) whichever is greater (after 2 minutes) Where, C = Rated capacitance in F；V = Rated DC working voltage in V Dissipation Factor (Tan at 120Hz, 20℃) Rated Voltage 6.3 100 Tan (max) 0.30 0.26 0.22 0.16 0.13 0.10 0.08 0.08 0.07 When the capacitance exceeds 1,000F, 0.02 shall be added every 1,000F increase. (20℃) Low Temperature Characteristics (at 120Hz) Impedance ratio shall not exceed the values given in the table below. Rated voltage (V) 6.3 100 Z (25℃)/ Z (+20℃) Impedance Ratio Z (55℃)/ Z (+20℃) Endurance (105℃) (Applied ripple current) Test time 2,000 Hrs for D6.3mm & 86.5L & 107.7L; 5,000 Hrs for D8mm Capacitance Change Within 30% of initial value Dissipation Factor Less than 300% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage applied for 2,000 ~ 5,000 hours at 105℃. Shelf life (105℃) Test time 1,000 Hrs Capacitance Change Within 30% of initial value Dissipation Factor Less than 300% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Ripple Current & Frequency Multipliers Frequency (Hz) 50, 60 120 10k up Multiplier 0.60 0.70 0.85 1.0 ■ OUTLINE DRAWING Unit：mm L A B C W P0.2 Fig. No. Marking color：Black D 6.3mm D = 8 ~ 10 mm D 12.5 mm I = 0.01CV or 3 ( I = 0.01CV or 3 ( I = 0.01CV or 3 ( A) whichever is greater (after 2 minutes) Where, C = Rated capacitance in F V = Rated DC working voltage in V Rated Voltage 6.3 Tan (max) 0.30 0.26 0.22 0.16 0.13 0.10 When the capacitance exceeds 1,000 When the capacitance exceeds 1,000 When the capacitance exceeds 1,000 F, 0.02 shall be added every 1,000 F, 0.02 shall be added every 1,000 F, 0.02 shall be added every 1,000 F increase. (20 Impedance ratio shall not exceed the values given in the table below. Rated voltage (V) 6.3 Z ( / Z (+20 Impedance Ratio Z ( / Z (+20 Test time 2,000 Hrs for D 6.3mm & 8 5,000 Hrs for D 8mm Capacitance Change Within 30% of initial value Dissipation Factor Less than 300% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage applied for 2,000 ~ 5,000 hours at 105 Test time 1,000 Hrs Capacitance Change Within 30% of initial value Dissipation Factor Less than 300% of specified value Leakage Current Within specified value * The above Specifications shall be satisfied when the capacitors are restored to 20 after exposing them for 1,000 hours at 105 without voltage applied. Frequency (Hz) 50, 60 120 Multiplier 0.60 0.70 0.85 OUTLINE DRAWING
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. CHIP TYPE Aluminum Electolytic Capacitors VZH ■ STANDARD RATINGS Rated voltage (V) 6.3 10 16 25 35 50 Case Impedance Rated ripple current Case Impedance Rated ripple current Case Impedance Rated ripple current Case Impedance Rated ripple current Case Impedance Rated ripple current Case Impedance Rated ripple current Item Rated capacitance (F) DL (mm) mArms DL (mm) mArms DL (mm) mArms DL (mm) mArms DL (mm) mArms DL (mm) mArms 810 0.17 450 1010 0.18 553 810 0.17 450 107.7 0.17 450 1010 0.18 553 1010 0.09 670 12.513.5 0.12 650 1816.5 0.048 1500 1260 1616.5 1621.5 0.054 0.038 1260 1630 18 Rated voltage (V) 63 80 100 Case Impedance Rated ripple current Case Impedance Rated ripple current Case Impedance Rated ripple current Item Rated capacitance (F) DL (mm) mArms DL (mm) mArms DL (mm) mArms 33 810 0.50 280 810 1.3 130 1010 0.7 200 47 810 0.50 280 1010 0.7 200 1010 0.7 200 1821.5 0.15 950 (Note) Rated ripple current：mA/rms at 100kHz, 105℃, Impedance：/at 100kHz, 20℃ 1.35 80 5.7 0.80 150 6.3 5.7 0.44 230 6.3 5.7 0.44 230 6.3 5.7 0.44 230 0.80 150 0.80 150 6.3 5.7 0.44 230 0.44 230 6.3 5.7 0.44 230 0.44 230 6.3 5.7 0.44 230 0.44 230 6.3 5.7 0.44 230 6.5 0.36 280 6.3 7.7 0.36 280 0.44 230 0.44 230 6.3 5.7 0.44 230 0.44 230 6.3 5.7 0.44 230 0.44 230 6.5 0.36 280 0.17 450 6.3 7.7 0.36 280 0.17 450 0.44 230 0.44 230 6.3 5.7 0.44 230 0.44 230 6.5 0.36 280 0.17 450 0.17 450 7.7 0.17 450 6.3 7.7 0.36 280 0.17 450 0.36 280 0.36 280 6.5 0.36 280 6.3 7.7 0.36 280 0.36 280 7.7 0.17 450 0.09 670 0.36 280 0.17 450 0.17 450 0.17 450 7.7 0.17 450 7.7 0.17 450 0.17 450 0.17 450 12.5 13.5 0.070 820 0.17 450 0.17 450 0.17 450 0.17 450 7.7 0.17 450 0.09 670 0.09 670 0.09 670 12.5 0.060 950 0.17 450 0.17 450 0.09 670 0.09 670 0.09 670 0.09 670 12.5 13.5 0.070 820 0.070 820 12.5 0.060 950 0.17 450 0.09 670 12.5 13.5 0.070 820 12.5 0.060 950 16.5 0.054 1260 16.5 0.048 1500 0.09 670 0.09 670 12.5 13.5 0.070 820 0.070 820 12.5 0.060 950 0.060 950 16.5 0.054 1260 0.054 1260 21.5 0.038 1630 0.070 820 12.5 0.060 950 16.5 0.054 1260 16.5 0.054 1260 21.5 0.038 1750 16.5 0.048 1500 21.5 0.038 1630 0.060 950 0.060 950 16.5 0.054 1260 16.5 21.5 0.054 0.038 1260 1630 21.5 0.038 1750 16.5 0.048 1500 0.054 1260 0.054 1260 16.5 0.054 1260 0.054 1260 21.5 0.038 1630