VY05-05S30L VOLGEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Correspond to Analog Ciruits, Ultra Low Noise 8mVp-p Small Size, Long-Life, Isolated Type DC-DC Converter

1.5 Watt VY-L Series

VY-L series is a long-life, ultra low noise and isolated type DC-DC converter which is most suitable for analog circuits and analog-digital circuits. It has achieved low conducted emission and low radiated emission with the improved TCT circuit. The output noise is ultra low noise of 8mVp-p and has the ability to become the industry leader. <Features> - Ultra Low Noise, 8mVp-p typ. - Over-Heat Protection - 24pin DIP IC Size, 5-Side Metallic Shield Case - Over-Current protection - Wide Operating Temp. Range -25°C to +71°C - Isolation Capacitance 100pF max. - Possible to start-up from -30°C (No guarantee) - Isolated Type: DC500V - No Electrolytic Capacitor, No Tantalum Capacitor - Most Suitable for Analog and Digital Circuits - MTBF 1,000,000Hrs , All aging -High Reliability, Long-Life, High Performance - High Reliability with the Latest SMD Structure - New TCT Circuits (Patented) <Model, Rating> Table 1 Model Input Voltage Output Output I Line Reg Load Reg Noise Efficiency Range Voltage Current VY05-05S30L 4.75-6 5 0-300 0.3 0.3 10 60 VY05-09S16L 4.75-6 9 0-160 0.3 0.3 10 60 VY05-12S12L 4.75-6 12 0-120 0.3 0.3 10 60 VY05-15S10L 4.75-6 15 0-100 0.3 0.3 10 60 VY05-05W08L 4.75-6 ±5 ±0-80 0.5 0.5 8 45 VY05-12W06L 4.75-6 ±12 ±0-65 0.5 0.5 8 60 VY05-15W05L 4.75-6 ±15 ±0-53 0.5 0.5 8 60 * This model is compatible with the old VY series to be used for substitutions. <Specification> Table 2 Input Voltage/ Range 5V±0.25 Ｖ (Refer to the derating curve when input is 5.25-6.0V) Output Voltage Refer to Table 1 Line Regulation Refer to Table 1 (For the input voltage range of 5V±5%, at rating load) Load Regulation Refer to Table 1 (For the load regulation of 0-100%, at rating input voltage) Temperature Coefficient ±0.02%/°C typ. (When operating temperature changes between -20°C to +70°C ) Short Term Drift 50mV/ 8H max. (Except initial drift) Ripple & Noise (1)VY-SL: 10mVp-p typ. 15mVp-p max. (2)VY-WL: 8mVp-p typ. 15mVp-p max. (20MHz bandwidth) Efficiency 60% typ. (Rating input/ output, room temperature, refer to Table 1) Over-Current Protection Operates at 105% or more rating load current, auto recovery type. Over-Voltage Protection None Over-Heat Protection Built-in in the regulator part EMI Line Filter Built-in LC type line filter MTBF 1,000,000Hr (EIAJ RCR-9102) Isolation Voltage Between primary and secondary DC500V: for 1min., between case and input/ output DC500V: for 1min. Isolation Resistance Between primary and secondary DC500V: 10M ohm or more, between case and input/output DC500V: 10M ohm or mo re. Isolation Capacitance Between primary and secondary capacitance: 100pF max. Operating Temperature Rang e -25°C to +71°C (Temperature derating required from +50°C) Storage Temperature Range -30°C to +85°C Humidity Range 95%R. H. max. Cooling Condition Natural convection 5-10Hz All amplitude 10mm (1hour in each of 3 directional axes), 10-55Hz acceleration 2G (1 hour in each of 3 directional axes) Shock Acceleration 20G (3 times in each of 3 directional axes), Shocking time 11±5ms Weight 14g typ. Outline W=20.42 L=32.6 H=10.3 (mm) (For detail dimensions refer to the outline.) *The above specification is provided with rating value, unless otherwise specified. Kaga Electronics/Volgen DC-DC CONVERTERS www.volgen.com Rating lnput Voltage Vdc Vibration

<Outline> VY-SL Series VY-WL Series Figure 1 Figure 2 - Dimensions: mm, Weight: 14g typ. - 5-Side Metallic Shield Case, black plating (with a standoff) - Pin side is not shielded. It is recommended to set a pattern wider than the converter's bottom area right under the converter. <Standard Usage> VY-SL Series (5V, 9V, 12V, 15V) VY-WL Series (±12V, ±15V) - Recommended capacitor - Recommended capacitor C1=22µF -33µF (Electrolytic or multilayer ceramic capacitor) C1=22µF -33µF (Electrolytic or multilayer ceramic capacitor) C2=0.47-10µF (Electrolytic or multilayer ceramic capacitor) C2, C3=0.47-10µF (Electrolytic or multilayer ceramic capacitor) Figure 3 Figure 4 - Basically, external capacitors are not required, but noise can be lowered by reducing power line impedance and load line impedance. - High frequency and low impedance capacitors are recommended. - Noise can also be lowered by designing the pattern with short lead and not to make a loop. <Block Diagram> VY-SL Series VY-WL Series Figure 5 Figure 6

2 Kaga Electronics/Volgen DC-DC CONVERTERS

N.P 5typ Φ0.6 (2.33) 5.08 20.42 15.24 101 24 15 13 22.86 32.6 10.3 0.5 2.54 2.54 9.8 (2.33) (2.33) 5.08 20.42 15.24 101 24 15 13 22.86 32.6 (2.33) 10.3 0.5 2.54 2.54 9.8 N.P 5typ Φ0.6 NEW TCT +Vin -Vin +Vout -Vout NEW TCT C5 D3 C6 IC1 TR2 C2C1 TR1 CT1 TCT +Vin -Vin Common +Vout -Vout NEW TCT D1,2 C2C1 CT1 TR2 TR1 D3,4 IC1 IC2 C9D7