LBAA0QB1SJ-295 MURATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 25
Technical content
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. LoRa Module Data Sheet Semtech SX1262 Chipset for LoRa Design Name: Type1SJ Sample P/N : LBAA0QB1SJ-295SMP MP P/N : LBAA0QB1SJ-295 This Datasheet is preliminary version, and subject to change without notice
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd.
Revision History
Code Date Description Comments May 4, 2018 Initial Draft A May 18, 2018 Updated Electrical Characteristics B Apr 10, 2019 Changed the module size, block diagram , terminal configuration etc. C May 16, 2019 Updated the module Weight, Electrical Characteristics, Tape and Reel Packing D Aug 9, 2019 Updated Tape and Reel Packing Added Label information E May 9,2020 Added the certification statements Added the description of 2 antennas Update some information Updated Electrical Characteristics Updated block diagram Updated reference circuit F May 18,2020 Update Scope , Notice and PRECONDISION TO USE OUR PRODUCTS G Nov 9, 2020 Updated Packing (Humidity proof Packing) H Nov 12,2020 Added the Anatel statements I Jan 18,2021 Added comment in LoRa transmit specification J Apr 12,2021 Changed Part Number of Evaluation board K July 9, 2021 Updated Certification Info L Oct 27, 2021 Delete comment in LoRa transmit specification M Feb 27,202 Change the sample part number and EVK part number on p1,4
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. TABLE OF CONTENTS
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 1. Scope Interfaces : UART, I2C, USB, SPI Main ICs : STM32L, SX1262 Reference Clocks : Integrated 32MHz clock (TCXO with f requency error= ±3.0 ppm) and 32.768KHz clock (frequency error=±20 ppm) Supported Frequencies : 868 MHz, 915 MHz Module Size : 10.0 mm x 8.0 mm x 1.60 (max) mm. Weight : 0.28g (Typ.) Package : Resin mold RoHS : This module is compliant with the RoHS directive MSL* : Level 3 *This product is moisture sensitive. Please check the detail in 13.1 Storage Condition section. 2. Part Number Ordering Part Number Description LBAA0QB1SJ-295SMP Engineering sample LBAA0QB1SJ-TEMP-EVK Evaluation board LBAA0QB1SJ-295 MP P/N “Type1SJ” is design name of this module. Design name may be used in certification test report. 3. Block Diagram 4. Certification info USA/Canada FCC ID VPYLBAA0QB1SJ IC 772C-LBAA0QB1SJ Europe EN300 220-2 V3.2.1 compliant. Brazil Anatel ID : 14760-20-08488
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 5. Dimensions, Marking and Terminal Configurations Marking Meaning A Pin 1 Marking B Murata Logo C Module Type D Module Number E Inspection Number F 2D code (internal use) Table 1 Dimension (Unit: mm) Mark Dimension Mark Dimension Mark Dimension Structure SS0123456 295 1SJ A B C E F D STM32L072
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. Terminal Configurations NO. Terminal Name NO. Terminal Name NO. Terminal Name NO. Terminal Name
1 GND 13 PA4 25 GND 37 PA11
2 VREG 14 PA5 26 MCU_BOOT0 38 GND
3 DCDC_SW 15 PA3 27 PB5 39 PA10
4 GND 16 PA2 28 PB3 40 PA9
5 VDD_RF 17 PA0 29 PB4 41 PA8
6 GND 18 PA1 30 PB6 42 PB10
7 VDD_MCU 19 MCU_nRST 31 PB7 43 PB11
8 GND 20 PB9 32 PA14 44 GND
9 PB2 21 PB8 33 PA13 45~56 GND
10 PA7 22 GND 34 GND
11 PA6 23 ANT 35 VDD_USB
12 GND 24 GND 36 PA12
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. Table 2 Terminal Configurations Pin NO. Terminal Name Type Connection to Description IC terminal
1 GND Ground - Ground
2 VREG O SX1262_VREG Regulated output voltage from
internal regulator LDO/DC-DC
3 DCDC_SW O SX1262_DCC_SW DC-DC Switcher Output
4 GND Ground - Ground
5 VDD_RF Power SX1262_VBAT / VDD_IN Power supply for RF IC
6 GND Ground - Ground
7 VDD_MCU Power SX1262_VBAT_IO,STM32L07
2_VDD / VDDA / VREF+ Power supply for MCU and RF IC
8 GND Ground - Ground
9 PB2 I/O STM32L072_PB2
GPIO mode:PB2 LPTIM1_OUT I2C3_SMBA
10 PA7 I/O STM32L072_PA7
GPIO mode:PA7 SPI1_MOSI COMP2_OUT ADC_IN7
11 PA6 I/O STM32L072_PA6
GPIO mode:PA6 SPI1_MISO LPUART1_CTS COMP1_OUT ADC_IN6
12 GND Ground - Ground
13 PA4 I/O STM32L072_PA4
GPIO mode:PA4 SPI1_NSS UART2_CK COMP1_INM/COMP2_INM ADC_IN4 DAC_OUT1
14 PA5 I/O STM32L072_PA5
GPIO mode:PA5 SPI1_SCK COMP1_INM/COMP2_INM ADC_IN5 DAC_OUT2
15 PA3 I/O STM32L072_PA3
GPIO mode:PA3 ADC_IN3 USART2_RX LPUART1_RX COMP2_INP
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. Pin NO. Terminal Name Type Connection to Description IC terminal
16 PA2 I/O STM32L072_PA2
GPIO mode:PA2 ADC_IN2 USART2_TX LPUART1_TX COMP2_OUT/COMP2_INM
17 PA0 I/O STM32L072_PA0
GPIO mode:PA0 ADC_IN0 USART2_CTS USART4_TX COMP1_OUT/COMP1_INM
18 PA1
STM32L072_PA1 GPIO mode:PA1 ADC_IN1 USART2_RTS USART4_RX COMP1_INP
19 MCU_nRST I STM32L072_nRST Reset for MCU
20 PB9 I/O STM32L072_PB9
GPIO mode: PB9 I2C1_SDA SPI2_NSS I2S2_WS
21 PB8 I/O STM32L072_PB8
GPIO mode:PB8 I2C1_SCL
22 GND Ground - Ground
23 ANT A, I/O - Transmit / Receive antenna
24 GND Ground - Ground
25 GND Ground - Ground
26 MCU_BOOT0 I STM32L072_BOOT0 BOOT0 for MCU
27 PB5 I/O STM32L072_PB5
GPIO mode:PB5 LPTIM1_IN1 SPI1_MOSI I2C1_SMBA USART1_CK USART5_RTS COMP2_INP
28 PB3 I/O STM32L072_PB3
GPIO mode:PB3 COMP2_INM SPI1_CLK USART1_RTS USART5_TX
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. Pin NO. Terminal Name Type Connection to Description IC terminal
29 PB4 I/O STM32L072_PB4
GPIO mode:PB4 COMP2_INP SPI1_MISO USART1_CTS USART5_RX I2C3_SDA
30 PB6 I/O STM32L072_PB6
GPIO mode:PB6 I2C1_SCL USART1_TX LPTIM1_ETR COMP2_INP
31 PB7 I/O STM32L072_PB7
GPIO mode:PB7 I2C1_SDA USART1_RX LPTIM1_IN2 USART4_CTS COMP2_INP VREF_PVD_IN
32 PA14 I/O STM32L072_PA14
GPIO mode:PA14 SWCLK USART2_TX LPUART1_TX
33 PA13 I/O STM32L072_PA13
GPIO mode:PA13 SWDIO USB_OE LPUART1_RX
34 GND Ground - Ground
35 VDD_USB Power STM32L072_VDD_USB Power supply for MCU USB Interface
36 PA12 I/O STM32L072_PA12
GPIO mode:PA12(power supply by VDD_USB) USB_DP SPI1_MOSI USART1_RTS COMP2_OUT
37 PA11 I/O STM32L072_PA11
GPIO mode:PA11(power supply by VDD_USB) USB_DM SPI1_MISO USART1_CST COMP1_OUT
38 GND Ground - Ground
39 PA10 I/O STM32L072_PA10
GPIO mode:PA10 USART1_RX I2C1_SDA Pin NO. Terminal Name Type Connection to Description IC terminal
40 PA9 I/O STM32L072_PA9 GPIO mode:PA9
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. USART1_TX I2C1_SCL I2C3_SMBA MCO
41 PA8 I/O STM32L072_PA8
GPIO mode:PA8 MCO USB_CRS_SYNC USART1_CK I2C3_SCL
42 PB10 I/O STM32L072_PB10
GPIO mode:PB10 LPUART1_TX/LPUART1_RX SPI2_SCK I2C2_SCL
43 PB11 I/O STM32L072_PB11
GPIO mode:PB11 LPUART1_RX/ LPUART1_TX I2C2_SDA
44 GND Ground - Ground
45~56 GND Ground - Ground Notes: GPIO pins are to be left OPEN if not used.
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 6. Absolute Maximum Ratings Table 3 Maximum ratings Parameters Min Typ Max Unit Storage Temperature -40 25 +85 degC Input RF Level - - 10 dBm Supply Voltage VDD_RF, VDD_MCU, VDD_USB -0.3 - 3.9 V 7. Operating Condition Table 4 Operating specification Parameters Min Typ Max Unit Operating Temperature -40 25 +85 degC Supply Voltage VDD_RF, VDD_MCU 2.0 - 3.6 V VDD_USB (USB peripheral used) (1) 3.0 - 3.6 V VDD_USB(USB peripheral not used) (1) VDD_MCU_min VDD_MCU VDD_MCU_max V (1) VDD_USB must respect the following conditions: - When VDD_MCU is powered on (VDD_MCU < VDD_MCU_min), VDD_USB should be always lower than VDD_MCU. - When VDD_MCU is powered down (VDD_MCU < VDD_MCU_min), VDD_USB should be always lower than VDD_MCU. - In operating mode, VDD_USB could be lower or higher than VDD_MCU. - If the USB is not used, VDD_USB must be tied to VDD_MCU to be able to use PA11 and PA12 as standard I/O.
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 8. Electrical Characteristics 8.1. FSK Transceiver Specification Conditions: Supply voltage =3.3 V, Temperature = 25 ° C, TCXO = 32 MHz, FRF =868/915 MHz, all RF impedances matched, transmit mode output power defined in 50 Ohm load , FSK BER = 0.1%, 2-level FSK modulation without pre-filtering, BR = 4.8 kb/s, FDA = 5 kHz, BW_F = 20 kHz double-sided, unless otherwise specified. FSK Receive Specification Symbol Description Conditions Min Typ Max Unit RXS_2FB Sensitivity 2-FSK, RX Boosted, Split RF path for RX and TX BR_F = 4.8 kb/s, FDA = 5 kHz, BW_F = 20 kHz -117 dBm FSK Transmit Specification Symbol Description Conditions Min Typ Max Unit TXOP Power setting = 22 dBm 868MHZ Band 21.5 dBm 915MHZ Band 20.8 dBm IDDTX Power setting = 22 dBm 868MHZ Band 124 mA 915MHZ Band 112 mA 8.2. LoRa Transceiver Specification Conditions: The table below gives the electrical specifications for the transceiver operating with LoRaTM modulation. Following conditions apply unless otherwise specified: Supply voltage = 3.3 V, T emperature = 25 °C, TCXO = 32 MHz, FRF =868/915 MHz, all RF impedances matched, transmit mode output power defined in 50 Ohm load, Error Correction Code (EC) = 4/5, Packet Error Rate (PER)= 1%, CRC on payload enabled, Payload length = 10 bytes. LoRa Receive Specification Symbol Description Conditions Min Typ Max Unit IDDRX Receive mode, DC-DC mode used, RX Boosted, 868MHZ Band 15.5(1) mA 915MHz Band 15.5(1) mA IDDRX Receive mode, LDO mode used, RX Boosted 868MHZ Band 20.0(1) mA 915MHz Band 20.0(1) mA RXS_LB (125KHz) Sensitivity Lora, RX Boosted, Split RF path for RX and TX. 125KHz bandwidth SF = 7 -124 dBm SF = 12 -137 dBm RXS_LB (250KHz) Sensitivity Lora, RX Boosted, Split RF path for RX and TX. 250KHz bandwidth SF = 7 -121 dBm SF = 12 -134 dBm (1) IDDRX is tested under test FW, and MCU is not in sleep mode. LoRa Transmit Specification Symbol Description Conditions Min Typ Max Unit TXOP TXOP setting = 22 dBm 868MHZ Band 21.5 dBm 915MHZ Band1 20.8 dBm IDDTX TXOP setting = 22 dBm 868MHZ Band 124 mA 915MHZ Band 112 mA
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 8.3. Low power mode current Conditions: Power supply=3.3 V, Temperature=25 °C; Description Min Typ Max Unit STM32L072 in stop mode with RTC (Real Time Clock) SX1262 in cold start sleep mode1 1.3 uA STM32L072 in stop mode with RTC (Real Time Clock) SX1262 in warm start sleep mode without RC64K(64kHz RC oscillator)2 2.0 uA STM32L072 in stop mode with RTC (Real Time Clock) SX1262 in warm start sleep mode with RC64K(64kHz RC oscillator)2 2.5 uA 1. Cold start is equivalent to device at POR or when the device is waking up from sleep mode with all blocks OFF. 2. Warm start is only happening when device is waking up from sleep mode with its configuration retained. 9. Power Sequences
9.1 Power Up Sequence
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 10. Recommend Land Pattern Notes： 1. Dimension unit is millimeter (Angle unit is degree). 2. This land pattern is for reference only. Consult your manufacturing group to ensure your company's manufacturing guidelines are met. 3. Thermal vias in the land pattern of the exposed pad shal l be connected to a system ground plane. Failure to do so may compromise the thermal and/or functional performance of the device. 4. Square packa ge-dimension apply in both "X" and "Y" directions.
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 11. Reference Circuit Ty pe1SJ GND VREG DCDC_SW GND VDD_RF GND VDD_MCU GND PB2 PA7 PA6 GND PA4 PA5 PA3 PA2 PA0 PA1 MCU_nRST PB9 PB8 GND ANT GND GND MCU_BOOT0 PB5 PB3 PB4 PB6 PB7 PA14 PA13 GND VDD_USB PA12 PA11 GND PA10 PA9 PA8 PB10 PB11 GND GND GND GND GND GND GND GND 51GND 52GND 53GND 54GND 55GND PA10/USART1_RX PA9/USART1_TX PA14/SWCLK MCU_BOOT0 100k ohm 10uF 0.1uF VREG DCDC_SW 15uH PA7_SPI1_MOSI MCU_nRST PA2/ADC_IN2 PA3/ADC_IN3 10uF 0.1uF 0.1uF SW3 SKQYA 1 2 SW1 SKQYA 1 2 VDDFB1 BLM15HG102SN1D VDD RF-SOCKET SMA connector PA13/SWDIO VDD PB2/LPTIM1_OUT PA6/SPI1_MISO PA4/SPI1_NSS PA5/SPI1_SCK PA0/ADC_IN0 PA1/ADC_IN1 PB9 PB8 PB5/LPTIM1_IN1 PB3/COMP2_INM PB4/COMP2_INP PB6/I2C1_SCL PB7/I2C1_SDA PA12/USB_DP PA11/USB_DM PA8/MCO PB10/LPUART1_TX PB11/LPUART1_RX C6 10uF 0.1uF VDD
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 12. Tape and Reel Packing 12.1. Dimension of Tape (unit: mm) 12.2. Dimensions of Reel 2.0±0.1 1.75±0.1 0.30±0.05 16.0±0.1 11.5±0.1 10.5±0.05 1.5+0.1/-0.0 24.0+0.3/-0.1 feeding direction 4.0±0.1 *1 1.75±0.05 R80 R135 5 22 φ 120 φ330±2 φ 80±1 φ13±0.2 Label Reel inside width W1: 25.5±1.0 Reel outside width W2: 29.5±1.0 Unit: mm
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 12.3. Taping Diagrams [1] Feeding Hole : As specified in (1) [2] Hole for chip : As specified in (1) [3] Cover tape : 62μMin thickness [4] Base tape : As specified in (1) 12.4. Leader and Tail Tape Feeding Hole Chip Feeding Direction [2] [3] [4] [3] [1] 40 to 200mm (No components) Component s No components Feeding direction Leader tape (Cover tape alone) 150mm min. 250mm min. Tail tape
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. - The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled toward the user. - The cover tape and base tape are not adhered at no components area for 250mm Min. - Tear off strength against pulling of cover tape: 5N Min. - Packaging unit : 1000 pcs/ reel - Material ➢ Base tape : Plastic ➢ Reel : Plastic ➢ Cover tape, cavity tape and reel are made the anti-static processing. - Peeling of force: 1.3N max. in the direction of peeling as shown below. - Packaging (Humidity proof Packing) Tape and reel must be sealed with the anti-humidity plastic bag. The bag contains the desiccant and the humidity indicator. 165 to 180 ? 0.7 N max. Base tape Cover tape 1.3 N max. 表示ラベル Label Desiccant Humidity Indicator Anti-humidity Plastic Bag Caution label Certification label
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 13. Notice 13.1. Storage Conditions Please use this product within 6month after receipt. - The product shall be stored without opening the packing under the ambient temperature from 5 to 35 ° C and humidity from 20 ~ 70 %RH. (Packing materials, in particular, may be deformed at the temperature over 40 ° C) - The product left more than 6months after reception, it needs t o be confirmed the solder ability before used. - The product shall be stored in non-corrosive gas (CL2, NH3, SO2, NOx, etc.). - Any excess mechanical shock including, but not limited to, sticking the packing materials by sharp object and dropping the product, shall not be applied in order not to damage the packing materials. This product is applicable to MSL3 (Based on IPC/JEDEC J-STD-020) - After the packing opened, the product shall be stored at <30 ° C / <60 %RH and the product shall be used within 168 hours. Please record and manage the time after opening. - Product should be repacked with desiccating agent immediately after using. - When the color of the indicator in the packing changed, the product shall be baked before soldering. Baking condition: 125 +5/-0 ° C, 24 hours, 1 time The products shall be baked on the heat-resistant tray because the material (Base T ape, Reel T ape and Cover T ape) are not heat-resistant. *For the MSL standard, see IPC/JEDEC J-STD-020 (can be downloaded from www.jedec.org). If the storage environment is not conducted above standard conditions, it will cause some issue (e.g., Operation issue, Overcurrent, Malfunction) we shall not be responsible for that. Before using please refer to “PRECONDITIONS TO USE MURATA PRODUCTS” 13.2. Handling Conditions Be careful in handling or transporting products beca use excessive stress or mechanical shock may break products. Handle with care if products may have cracks or damages on their terminals, the characteristics of products may change. Do not touch products with bare hands that may result in poor solder abili ty and destroy by static electrical charge. 13.3. Standard PCB Design (Land Pattern and Dimensions) All the ground terminals should be connected to the ground patterns. Furthermore, the ground pattern should be provided between IN and OUT terminals. Please refer to the specifications for the standard land dimensions. The recommended land pattern and dimensions is as Murata's standard. The characteristics of products may vary depending on the pattern drawing method, grounding method, land dimensions, land forming method of the NC terminals and the PCB material and thickness. Therefore, be sure to verify the characteristics in the actual set. When using non-standard lands, contact Murata beforehand. 13.4. Notice for Chip Placer : When placing products on the PCB, produ cts may be stressed and broken by uneven forces from a worn-out chucking locating claw or a suction nozzle. To prevent products from damages, be sure to follow the specifications for the maintenance of the chip placer being used. For the positioning of products on the PCB, be aware that mechanical chucking may damage products. 13.5. Soldering Conditions： The recommendation conditions of soldering are as in the following figure. Soldering must be carried out by the above mentioned conditions to prevent products from damage. Set up the highest temperature of reflow within 2 60 ° C. Contact Murata before use if concerning other
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. soldering conditions. Reflow soldering standard conditions (Example) Please use the reflow within 2 times. Use rosin Type flux or weakly active flux with a chlorine content of 0.2 wt % or less. 13.6. Cleaning : Since this Product is Moisture Sensitive, any cleaning is not recommended. If any cleaning process is done the customer is responsible for any issues or failures caused by the cleaning process. 13.7. Operational Environment Conditions : Products are designed to work for electronic products under normal environmental conditions (ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the similar conditions to the above-mentioned. However, if products are used under the following circumstances, it may damage products and leakage of electricity and abnormal temperature may occur. - In an atmosphere containing corrosive gas (CL2, NH3, SOx, NOx, etc.). - In an atmosphere containing combustible and volatile gases. - Dusty place. - Direct sunlight place. - Water splashing place. - Humid place where water condenses. - Freezing place. If there are possibilities for products to be used under the preceding clause, consult with Murata before actual use. As it might be a cause of degradation or destruction to apply static electricity to products, do not apply static electricity or excessive voltage while assembling and measuring. 13.8. Input Power Capacity : Products shall be used in the input power capacity as specified in this specification. Inform Murata beforehand, in case that the components are used beyond such input power capacity range. Within 120s Pre-heating time(s) 220 deg.C Within 60s Cooling down Slowly 180 deg.C 150 deg.C 250 deg.C Within 10s Tpeak-5deg.C
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 14. Regulatory Statements 14.1. FCC Statements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la section 15 des ré glementations de la FCC. Le fonctionnement de l’appareil est sujetaux deux conditions suivantes : (1) cet appareil ne doit pas provoquer d’interférences néfastes, et (2) cet appareil doit tolé rer les interfé rences reç ues, y compris celles qui risquent de provoquer un fonctionnement indé sirable. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body Cet é quipement doit ê tre installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps When the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can be use wording “Contains transmitter module FCC ID: VPYLBAA0QB1SJ” or “Contains FCC ID: VPYLBAA0QB1SJ”.
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 14.2. IC Statements This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le pré sent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisé e aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioé lectrique subi, mê me si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent Conformé ment à la ré glementation d'Industrie Canada, le pré sent é metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infé rieur) approuvé pour l'é metteur par Industrie Canada. Dans le but de ré duire les risques de brouillage radioé lectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonné e é quivalente (p.i.r.e.) ne dé passe pas l'intensité né cessaire à l'é tablissement d'une communication satisfaisante. When the Industry Canada certification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can be use wording “Contains transmitter module IC: 772C-LBAA0QB1SJ”or “Contains IC: 772C-LBAA0QB1SJ”. 14.3. General Statements The module is limited to OEM installation ONLY . The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. Therefore, the final host product must be submitted to Murata for confirmation that the installation for the module into the host is in compliance with regulations of FCC and IC Canada. Specially, if an antenna other than the model documented in the Filing is used, a Class 2 Permissive Change must be filed with the FCC. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. The LoRa module is for use with external antenna ONLY. The certified antennas include: (1) Monopole Antenna (LPRS: ANT-SS900) with peak gain 1.04dBi. (2) PCB pattern Antenna with peak gain 1.0dBi. (3) Flexible Antenna (Molex: 2111400100) with peak gain 1.0dBi. This module has been approved by FCC to operate with the antenna types with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 14.4. ANATEL Statements Este equipamento nã o tem direito à proteç ã o contra interferê ncia prejudicial e nã o pode causar interferê ncia em sistemas devidamente autorizados.
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. 15. PRECONDITION TO USE OUR PRODUCTS PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the products is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. You agree that you will use any and all software or program code (including but not limited to hcd, firmw are, nvram, and blob) we may provide or to be embedded into our product (“Software”) provided that you use the Software bundled with our product. YOU AGREE THAT THE SOFTWARE SHALL BE PROVIDED TO YOU “AS- IS” BASIS, MURATA MAKES NO REPRESENTATIONS OR WARRANTIES THAT THE SOFTWARE IS ERROR-FREE OR WILL OPERATE WITHOUT INTERRUPTION. AND MORE, MURATA MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED WITH RESPECT TO THE SOFTWARE. MURATA E XPRESSLY DISCLAIM ANY AND ALL WARRANTIES OR CONDITIONS OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE NOR THE WARRANTY OF TITLE OR NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. You shall indemnify and hold harmless us, our affiliates and our licensor from and against any and all claims, costs, expenses and liabil ities (including attorney’s fees), which arise in connection with the using the Software. The product shall not be used in any application listed below which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party's life, body or property . You acknowledge and agree that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS AND THE SOFTWARE IN SUCH APPLICATIONS. - Aircraft equipment. - Aerospace equipment - Undersea equipment. - Power plant control equipment - Medical equipment. - Traffic signal equipment. - Burning / explosion control equipment - Disaster prevention / crime prevention equipment. - Transportation equipment (vehicles, trains, ships, elevator, etc.). - Application of similar complexity and/ or reliability requirements to the applications listed in the above. We expressly prohibit you from analyzing, breaking, r everse-engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our products or services are used. Information provided by us regarding third-party products or services does not constitute a license from u s to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. By signing on specification sheet or approval sheet , you acknowledge that you are the legal representative for your company and that you understand and accept the validity of the contents herein. When you are not able to return the signed version of specification sheet or ap proval sheet within 30 days from receiving date of specification sheet or approval sheet, it shall be deemed to be your consent on the content of specification sheet or approval sheet. Customer acknowledges that engineering samples may deviate from specifi cations and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by - the use of the engineering sample other than for evaluation pu rposes, particularly the installation or integration in the product to be sold by you, -deviation or lapse in function of engineering sample,
Preliminary Specification Number : SP -1SJ-295-M Preliminary & Confidential < Specification may be changed by Murata without notice > Murata (China) Investment Co., Ltd. -improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you can’t agree the above contents, you should inquire our sales.