VPW2827 CPI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Electronic Power Conditioner for Millimeter Wave EIKs CPI EPCs are designed and tested to operate a wide variety of CPI Extended Interaction Klystrons and Oscillators. Our EPC architecture is designed to provide optimum protection for the EIK and worry free operation for the user. EIK operating parameters are programmed into onboard memory then password protected. Integration by CPI provides worry-free service and support for long life and reliable operation in this easy to use package. Features:
- Beam Voltage -4.0 to –11.0 kV
- Anode Voltage +1.0 to +6.0 kV
- Collector Voltage Virtual ground / 70% of beam voltage
- Heater voltage -5.0 to –7.0 V
- Collector current 0 to 150 mA
- Body Current 0 to 20 mA
- Anode Current -0.1 to +1.0 mA
- Heater current 0 to 3.0 amps
- Total Power output 1.5 kW
- External Interlock Inhibits High Voltage
- Prime Power 110/220 V, 50/60 Hz 1Ø
- Dimensions 8.72x19x24.5 inches (Handles 1.5 inches)
- Remote EIK mounting box Attached by 3 meter HV lead. Size 7.7x9.7x9.7 inches
- Fault Protection Fully protected for operating designated CPI EIKs
- Cooling Forced air using integral blower. CPI Canada 45 River Drive. Georgetown. Ontario. Canada. L7G2J4 Phone 1-905-877-0161. FAX: 1- 905- 873- 7416. OUR E-MAIL: marketing@cmp.cpii.com
EPC and mounting box shown with EIK (EIK is not included with the EPC)